All Products
Browse the full range of electronics, components, and maker supplies available at Little Bird Electronics. From microcontrollers and sensors to connectors, tools, and development boards — everything you need for your next project is right here.
Whether you're a hobbyist, educator, student, or professional engineer, our catalogue covers robotics, IoT, STEM kits, 3D printing accessories, and thousands of electronic components with fast shipping across Australia.
16mm Illuminated Pushbutton - Blue Latching On/Off Switch
SKU: AF-1476 | Brand: Adafruit
A 16mm illuminated pushbutton with a built-in blue LED and latching on/off action. Press once to switch on, press again to switch off — ideal for power switches, mode selectors, and control panels. The LED is wired i...
Delivered by Tue 6 Oct
Arcade Button with LED - 30mm Translucent Yellow
SKU: AF-3488 | Brand: Adafruit
This 30mm translucent yellow arcade button has built-in LEDs for a beautiful illuminated look. Two surface-mount LEDs with a ~1K resistor are embedded in the button body in a series configuration, drawing just 5mA fro...
Delivered by Tue 6 Oct
USB to Micro-B Adapter
SKU: SF-COM-14567 | Brand: SparkFun
It’s tiny, it’s handy, and it can give your normal USB-equipped device a micro-B connector! With the USB to Micro-B Adapter you can make a flash drive connect to your tablet, connect a keyboard to your phone in order ...
Delivered by Tue 6 Oct
Green Wire Wrap Wire on Spool 250m 30AWG
SKU: LB-LS0153G | Brand: Little Bird
Green Wire Wrap Wire on Spool 250m 30AWG Wire Wrapping Wire, 30 AWG External Material :PVC PVC insulation, Tinned copper conductor Diameter: 0.5 mm Inner diameter:0.25 mm Length:250 meters Heat-resistant: 80 degrees
Delivered by Tue 6 Oct
Button Switch Sensor Module
SKU: LB-LR0022 | Brand: Little Bird
It's a push button!A push button with resistors and breadboard friendly layout.**Push Button Pinout:**- Signal (High when button pushed)- Positive- Ground**Specifications:**- 600mW MAX (50mA at 12v)
Delivered by Tue 6 Oct
USB Cable with Switch
SKU: AF-1620 | Brand: Adafruit
Add a power switch to any USB-powered project simply by plugging this between the USB power port and the USB cable. This is the most useful thing you never knew you needed! You'll want to pick up a bunch for your elec...
Delivered by Tue 6 Oct
Silicone Cover Stranded-Core Wire - 2m 30AWG Green
SKU: AF-2005 | Brand: Adafruit
Silicone-sheathing wire is super-flexible and soft, and its also strong! Able to handle up to 200°C and up to 600V, it will do when PVC covered wire wimps out. We like this wire for being extremely supple and flexible...
Delivered by Tue 6 Oct
Panel Mount 1K potentiometer (Breadboard Friendly) [1K Linear]
SKU: AF-1789 | Brand: Adafruit
This 1K potentiometer is a two-in-one, good in a breadboard or with a panel. Its a fairly standard linear taper 1K ohm potentiometer, with a grippy shaft. Its smooth and easy to turn, but not so loose that it will ...
Delivered by Tue 6 Oct
Adafruit LED Sequins - Rose Pink - Pack of 5
SKU: AF-1792 | Brand: Adafruit
Add a little sparkle to your wearable project with Adafruit LED Sequins. These tiny sewable LED boards are the simpler sibling of Flora NeoPixels — they display a single colour with no digital control needed, making t...
Delivered by Tue 6 Oct
Switched JST-PH 2-Pin SMT Right Angle Breakout Board
SKU: AF-1863 | Brand: Adafruit
This switched JST connector is the best way to quickly prototype with our LiPoly batteries. We paired a genuine JST connector with a slide switch that can do up to 600mA. Both are soldered onto a breadboard-friendl...
Delivered by Tue 6 Oct
TXB0104 Bi-Directional Level Shifter [TXB0104]
SKU: AF-1875 | Brand: Adafruit
Because the Arduino (and Basic Stamp) are 5V devices, and most modern sensors, displays, flash cards and modes are 3.3V-only, many makers find that they need to perform level shifting/conversion to protect the 3.3V de...
Delivered by Tue 6 Oct
GPIO Header for Raspberry Pi A+/B+/Pi 2/Pi 3 [2x20 Female Header]
SKU: AF-2222 | Brand: Adafruit
Connect your own PCB to a Raspberry Pi B+ with this normal-height female header. The female header part is about 8.5mm tall, good for small HATs that do not to clear the USB/Ethernet jacks. This header has 3m...
Delivered by Tue 6 Oct
SMT GPIO Header for Raspberry Pi HAT - 2x20 Short Female Header
SKU: AF-2187 | Brand: Adafruit
A custom-made 2×20 short female header designed for surface-mount (SMT) Raspberry Pi HAT designs. This header provides the slimmest possible profile when you need a low-clearance connection between your HAT and a Rasp...
Delivered by Tue 6 Oct
APA102 5050 RGB LED w/ Integrated Driver Chip - 10 Pack [APA102C]
SKU: AF-2343 | Brand: Adafruit
These APA102C (DotStar) RGB LEDs feature an integrated driver chip inside each 5050 SMD package, giving you individually addressable 24-bit colour control (8 bits each for red, green, and blue). The same smart LED use...
Delivered by Tue 6 Oct
Brass M2.5 Standoffs 16mm tall - Black Plated - Pack of 2
SKU: AF-2337 | Brand: Adafruit
Finally we get our very own super sweet sixteen... 16 millimeters that is! Our Black Plated M/F Brass 16mm Standoffs are engineered specifically to keep your PiTFT or other Pi accessories w...
Delivered by Tue 6 Oct
CAT 5 Ethernet Cable
SKU: DF-FIT0116 | Brand: DFRobot
This is a high quality Category 5 (CAT5) patch cables is the solution to your internetworking needs. DOCUMENTS Cat 5 Definition
Delivered by Tue 6 Oct
micro:bit Expansion Board for Boson (Gravity Compatible)
SKU: DF-DFR0521 | Brand: DFRobot
The micro:bit Expansion Board for Boson is a carry-on board that connects to the BBC micro:bit via edge connector, replacing crocodile clips with six keyed 3-pin sockets. It is compatible with DFRobot's Boson and Grav...
Delivered by Tue 6 Oct
ESP32 Thing Stackable Header Set
SKU: SF-PRT-14311 | Brand: SparkFun
These headers are made to work with the SparkFun ESP32 Thing and ESP32 Power Control Shield boards. Each set of headers makes your ESP32 Thing easily stackable with the Power Control Shield or other applications. This...
Delivered by Tue 6 Oct
Concave Button - White
SKU: SF-COM-09340 | Brand: SparkFun
This is a 35mm concave momentary push button similar to the ones you find on arcade games. Simple screw in design. Perfect for mashing. This button has a great tactile, ‘clicky’ feel.Features: Concave plunger design D...
Delivered by Tue 6 Oct
9V to Barrel Jack Adapter V2
SKU: DF-FIT0043 | Brand: DFRobot
The second version of the 9V to Barrel Jack Adapter, now featuring a hard plastic battery snap for easier connection and disconnection. Plug a 9V battery into one end and connect the other to any device with a 5.5 × 2...
Delivered by Tue 6 Oct
Compare your options
All buying guides
The Teacher's Guide to micro:bit Robots: Kits, Buggies, and Robotics Compared
Compare micro:bit-compatible robot kits, buggies, and robotics platforms by age range, assembly difficulty, sensors, and curriculum fit — for classrooms, clubs, and home learners across Australia.
49 products compared
The Maker's Guide to Servos: Torque, Speed, and Control Compared
Compare hobby and industrial servos by torque, rotation range, and control type (PWM, digital, continuous) to pick the right motor for robotics, animatronics, and RC projects.
16 products compared
Title The Maker's Guide to ADCs: Resolution, Speed, and Interface Compared
Compare analogue-to-digital converters by bit depth, sample rate, and bus (I²C vs SPI) to pick the right chip for your Arduino, Raspberry Pi, or microcontroller project.
16 products compared