All Products
Browse the full range of electronics, components, and maker supplies available at Little Bird Electronics. From microcontrollers and sensors to connectors, tools, and development boards — everything you need for your next project is right here.
Whether you're a hobbyist, educator, student, or professional engineer, our catalogue covers robotics, IoT, STEM kits, 3D printing accessories, and thousands of electronic components with fast shipping across Australia.
16mm Illuminated Pushbutton - Yellow Latching On/Off Switch
SKU: AF-1444 | Brand: Adafruit
A 16mm illuminated pushbutton with a built-in yellow LED and latching on/off action. Press once to switch on, press again to switch off — ideal for power switches, mode selectors, and control panels. The LED is wired...
Delivered by Tue 24 Nov
HIFI DAC Audio Sound Card Module I2S interface for Raspberry Pi
SKU: LB-LS0657 | Brand: Little Bird
A high-fidelity DAC expansion board for Raspberry Pi that delivers superior audio quality over the Pi's built-in 3.5mm output. Built around Texas Instruments' PCM5122 DAC chip, this board connects via the I2S interfac...
Delivered by Tue 24 Nov
Stepper Motor 42BYG
SKU: LB-LR0214-50 | Brand: Little Bird
The 42BYG is a NEMA 17 bipolar stepper motor with a shaft-reversed design, commonly used in 3D printers, CNC machines, and DIY motion-control projects. With a 1.8° step angle and 40 N·cm holding torque, it provides re...
Delivered by Tue 24 Nov
Load Cell - 1kg, Straight Bar
SKU: LB-LR0400 | Brand: Little Bird
A 1kg straight bar load cell (strain gauge) that converts applied force into a measurable electrical signal. Made from aluminium alloy with four strain gauges in a Wheatstone bridge configuration, this sensor is ideal...
Delivered by Tue 24 Nov
Heat Sink Thermal Tape - 3M 8810 - 80mm x 80mm
SKU: AF-1468 | Brand: Adafruit
Get that heat sink stuck on good and strong with 3M's thermal tape. Specifically designed for attaching heat sinks to ICs. Works better and is less messy than thermal glues or pastes because the thickness is even acro...
Delivered by Tue 24 Nov
TrinityPixel WS2812B 5050 RGB LED Strip 5M 30LEDS Waterproof
SKU: LB-LR0281-9 | Brand: Little Bird
The TrinityPixel WS2812B is a 5-metre waterproof RGB LED strip featuring 30 individually addressable LEDs per metre (150 total). Each LED can be set to any 24-bit colour (8-bit PWM per red, green, and blue channel), g...
Delivered by Tue 24 Nov
40W Temperature Controlled Soldering Station
SKU: TB-TS1620 | Brand: Little Bird
An entry-level temperature-controlled soldering station ideal for hobbyists and beginners. The lightweight iron features an anti-slip grip and comes with a tip-cleaning sponge, while the base unit provides analogue te...
Delivered by Tue 24 Nov
Sound module
SKU: LB-LR0240 | Brand: Little Bird
This compact sound module lets a microcontroller detect the presence of loud sounds using its onboard microphone.It is designed for sound detection rather than audio recording or interpretation. An Arduino can read th...
Delivered by Tue 24 Nov
Short Wire Alligator Clip Test Lead (set of 12)
SKU: AF-1592 | Brand: Adafruit
A set of 12 short alligator clip test leads for making quick temporary connections without soldering. Each lead has a vinyl-covered alligator clip on both ends, colour-coded across six colours for easy circuit identif...
Delivered by Tue 24 Nov
2.54mm/0.1 Pitch Terminal Block - 3-pin
SKU: AF-2136 | Brand: Adafruit
A compact 3-pin screw terminal block with 2.54mm (0.1") pitch, designed to fit directly into perfboard and protoboards. Terminal blocks provide reliable, tool-adjustable PCB-to-wire connections that are easy to mainta...
Delivered by Tue 24 Nov
JST-PH 2-Pin SMT Right Angle Breakout Board
SKU: AF-1862 | Brand: Adafruit
A simple 2-pin connector soldered onto a breadboard-friendly breakout. This is compatible with the "JST PH 2-pin" connector. Mates perfectly with all our 1-cell LiPoly and LiIon batteries as well as our 6V coin ...
Delivered by Tue 24 Nov
Gravity:Digital IR Receiver Module
SKU: DF-DFR0094 | Brand: DFRobot
Infrared devices are widely used, and often for remote controlled devices. With this IR receiver, your Arduino project is now able to receive command from any IR remote controller. Well, it will be also easy...
Delivered by Tue 24 Nov
Sealed Membrane 4*4 button pad with sticker
SKU: DF-FIT0129 | Brand: DFRobot
The 4x4 Keypad is a general purpose 16 button (4x4) matrix keypad. It comes ready to work, simply peel-off the adhesive backing, stick it to your surface and plug it in.
Delivered by Tue 24 Nov
Capacitive Touch Kit For Arduino
SKU: DF-DFR0129 | Brand: DFRobot
A capacitive touch sensor kit for Arduino based on the MPR121 touch controller. Includes three interchangeable touch pads — a scroll wheel, a keypad with backlight support, and a grid pad for gesture and pattern recog...
Delivered by Tue 24 Nov
Adafruit Feather M0 Adalogger
SKU: AF-2796 | Brand: Adafruit
The Feather M0 Adalogger is an all-in-one datalogger built around the ATSAMD21G18 ARM Cortex M0 processor, with a built-in MicroSD card holder, native USB, and LiPo battery charging. With 256KB of flash and 32KB of RA...
Delivered by Tue 24 Nov
Barrel Jack Adapter - USB to 5.5mm
SKU: SF-TOL-08639 | Brand: SparkFun
A USB-A to 5.5 × 2.1 mm barrel jack adapter cable for powering development boards and small devices from any USB port. Centre-positive polarity, delivering up to 5 V at 500 mA (per USB specification). Specifications ...
Delivered by Tue 24 Nov
LilyPad LED (5pcs) - Yellow
SKU: SF-DEV-14014 | Brand: SparkFun
This is a simple pack of five Yellow LilyPad LEDs that are still attached to one another, letting you snap the LEDs apart at your leisure to sew into clothing or whatever else you can dream up.LilyPad is a wearable e-...
Delivered by Tue 24 Nov
Arduino Compatible Lithium Battery USB Charger Module
SKU: TB-XC4502 | Brand: Little Bird
This compact TP4056-based module charges a single lithium cell from a 5V USB supply. With charge state LEDs and both mini-USB and solder tab inputs, it's an easy way to add rechargeable battery capability to your proj...
Delivered by Tue 24 Nov
LED - Super Bright Red - 5 pack
SKU: SF-COM-00528 | Brand: SparkFun
These are very bright LEDs. The LEDs are so bright that it hurts to look directly at them. Please take a look at the pictures to get an idea of the intensity. All lenses are clear. Features: 9,000mcd brightness Stand...
Delivered by Tue 24 Nov
RS485 Shield For Arduino
SKU: DF-DFR0259 | Brand: DFRobot
Arduino RS485 is an industrial standard for long distance, anti-interferrence and reliable communication. So we create this RS485 Arduino shield, especially designed for the Arduino controller board. It convert...
Delivered by Tue 24 Nov
Compare your options
All buying guides
The Teacher's Guide to micro:bit Robots: Kits, Buggies, and Robotics Compared
Compare micro:bit-compatible robot kits, buggies, and robotics platforms by age range, assembly difficulty, sensors, and curriculum fit — for classrooms, clubs, and home learners across Australia.
49 products compared
The Maker's Guide to Servos: Torque, Speed, and Control Compared
Compare hobby and industrial servos by torque, rotation range, and control type (PWM, digital, continuous) to pick the right motor for robotics, animatronics, and RC projects.
16 products compared
Title The Maker's Guide to ADCs: Resolution, Speed, and Interface Compared
Compare analogue-to-digital converters by bit depth, sample rate, and bus (I²C vs SPI) to pick the right chip for your Arduino, Raspberry Pi, or microcontroller project.
16 products compared