All Products
Browse the full range of electronics, components, and maker supplies available at Little Bird Electronics. From microcontrollers and sensors to connectors, tools, and development boards — everything you need for your next project is right here.
Whether you're a hobbyist, educator, student, or professional engineer, our catalogue covers robotics, IoT, STEM kits, 3D printing accessories, and thousands of electronic components with fast shipping across Australia.
Little Bird Macaw WS2812B Rainbow Board 3 LED
SKU: LB-MACAW | Brand: Little Bird
The Macaw is a compact programmable RGB LED board with 3 WS2812B LEDs, commonly known as NeoPixels. It is ideal for adding bright, addressable colour effects to small electronics, robotics and classroom projects.Its c...
Delivered by Mon 23 Nov
Pico Display Pack 2.0
SKU: PR-PIM580 | Brand: Little Bird
The Pico Display Pack 2.0 is a 2.0" IPS LCD add-on that attaches to the back of your Raspberry Pi Pico. With an 18-bit capable 320×240 pixel display, four tactile buttons, and an RGB LED, it turns your Pico into a com...
Delivered by Mon 23 Nov
EagLED LED - Blue 10 pack
SKU: LB-EAGLED-LED-B | Brand: Little Bird
Made here in Sydney these are our very own EagLED LED - Blue in a pack of 10 These are still attached to one another, letting you snap the LEDs apart at your leisure to sew into clothing or use in Paper Circuits. ...
Delivered by Mon 23 Nov
Flame Sensor Module KY-026
SKU: LB-LR0007 | Brand: Little Bird
Flame Detection Sensor Module for use with Arduino Sensor for flame wavelengths between 760 nm to 1100 nm infrared is most sensitive60 degree detection sensor Two outputs mode: AO: analog output, real-time ou...
Delivered by Mon 23 Nov
10 pin splittable jumper wire - 300mm M/F
SKU: LB-00184 | Brand: Little Bird
A 10-wire splittable ribbon jumper cable with a male (pin) connector on one end and a female (socket) connector on the other. Each wire is colour-coded and can be peeled apart individually or in groups to suit your wi...
Delivered by Mon 23 Nov
Raspberry Pi Camera Cable - 20cm
SKU: PI-CAB0307 | Brand: Pimoroni
This 20 cm flat-flex cable (FFC) connects the Raspberry Pi Camera Module to the CSI port on your Raspberry Pi. A shorter cable is useful for compact builds, enclosures, and projects where the standard 15 cm cable is t...
Delivered by Mon 23 Nov
Universal Battery Tester
SKU: LB-PT12114 | Brand: Little Bird
A compact, multi-purpose battery tester that quickly checks the charge level of common household batteries. The colour-coded analogue dial gives you an instant good/low/replace reading — no guessing whether that batte...
Delivered by Mon 23 Nov
Micro:bit mini Robot - bird:bit
SKU: LB-BIRDBIT | Brand: Little Bird
This robot is a graphical programming robot for STEM education utilising the simple programming of the micro:bit to achieve great results. This compact robot is plug and play allowing children to quickly learn...
Delivered by Mon 23 Nov
Micro:bit GPIO T-type Expansion Board
SKU: LB-LS0823 | Brand: Little Bird
The Micro: bit GPIO T-type Expansion Board is a board that connects to the BBC micro:bit and expands the capabilities of the development platform by providing access to more pin. This breakout board for the micro:b...
Delivered by Mon 23 Nov
Soldering Iron Tip Cleaner
SKU: LB-LS0301 | Brand: Little Bird
Soldering Iron Tip Cleaner There is no water necessary , it can save energy , maintain temperature for the soldering iron to allow for faster work.It cleans better than conventional sponges and wo...
Delivered by Mon 23 Nov
Laser module for Arduino
SKU: LB-LR0021 | Brand: Little Bird
High Quality Laser sensor module for Arduino. Features: Operating Voltage: 5V PCB Size: 15*24 mm Wavelength: 650 nm Depth: 8 mm Height: 24 mm Width: 15 mm Product Weight: 2.2 g
Delivered by Mon 23 Nov
Adafruit Mono 2.5W Class D Audio Amplifier - PAM8302
SKU: AF-2130 | Brand: Adafruit
The Adafruit Mono 2.5W Class D Audio Amplifier delivers powerful sound from a tiny package. Based on the PAM8302 chip, it drives 4–8 ohm speakers at up to 2.5 W with over 90% efficiency — making it ideal for portable ...
Delivered by Mon 23 Nov
9V Snap Connector
SKU: DF-FIT0111 | Brand: DFRobot
A classic 9V battery snap connector with bare wire leads, 15 cm in length. Pair it with a DC Barrel Jack Adapter – Male to power an Arduino directly from a 9V battery. Key Features Bare Wire Leads – Solder or conne...
Delivered by Mon 23 Nov
Ceramic Capacitor Pack-250 PCS
SKU: DF-FIT0118 | Brand: DFRobot
This is a set of ceramic capacitors. Very handy for experiments and home cooked circuit board. This pack comes with 25 sets of capacitors with various capacitance and working voltage. SPECIFICATIONSWorking Voltage...
Delivered by Mon 23 Nov
3-AA Battery Holder, Enclosed with Switch
SKU: PL-1152 | Brand: Pololu
An enclosed battery holder for three AA cells with a built-in on/off switch. The snap-on lid slides over the batteries to fully enclose them, keeping the cells secure during use. Provides approximately 4.5 V with thr...
Delivered by Mon 23 Nov
LiPo SHIM for Pico
SKU: PR-PIM557 | Brand: Little Bird
This SHIM provides a convenient way of powering your Raspberry Pi Pico from a LiPo/LiIon battery. You can recharge the battery easily by providing power to the Pico's USB port. Solder this neat little square to th...
Delivered by Mon 23 Nov
Big Game Button with Enclosure 100mm USB Red
SKU: LB-LS7008-R | Brand: Little Bird
Some inputs deserve more than a keycap. The Big Game Button is a 100mm red dome button mounted in a tough plastic desktop enclosure, made to be slapped, smashed and enthusiastically buzzed, whether that's on a quiz ta...
Delivered by Mon 23 Nov
ThinkNode M2 Meshtastic (LoRa) Signal Transceiver Powered By ESP32-S3 With 1.3” OLED Display - (Without Battery)
SKU: EC-CIL13002M2 | Brand: Elecrow
Elecrow ThinkNode-M2 is a high-performance LoRa signal transceiver. It uses the ESP32-S3 module as the main processor and supports Bluetooth. Users can easily configure and monitor the device through their mobile pho...
Delivered by Mon 23 Nov
DIY LED Clock Kit - Learn to solder
SKU: LB-LS6868 | Brand: Little Bird
Build a functional RGB colour clock from scratch with this beginner-friendly soldering kit. The finished clock displays time, date, temperature, and day of the week on a 4-digit LED display — with 27 selectable colour...
Delivered by Mon 23 Nov
Lipo Battery Safe Bag
SKU: LB-PT91009 | Brand: Little Bird
Protect your valuables with our Lipo Battery Safe Bag! Made from high-quality, fire-retardant fiberglass nylon, this bag offers sturdy, durable protection against potential heat damage. While it’s not indestructible, ...
Delivered by Mon 23 Nov
Compare your options
All buying guides
The Teacher's Guide to micro:bit Robots: Kits, Buggies, and Robotics Compared
Compare micro:bit-compatible robot kits, buggies, and robotics platforms by age range, assembly difficulty, sensors, and curriculum fit — for classrooms, clubs, and home learners across Australia.
49 products compared
The Maker's Guide to Servos: Torque, Speed, and Control Compared
Compare hobby and industrial servos by torque, rotation range, and control type (PWM, digital, continuous) to pick the right motor for robotics, animatronics, and RC projects.
16 products compared
Title The Maker's Guide to ADCs: Resolution, Speed, and Interface Compared
Compare analogue-to-digital converters by bit depth, sample rate, and bus (I²C vs SPI) to pick the right chip for your Arduino, Raspberry Pi, or microcontroller project.
16 products compared