All Products

SKU: AF-2022 | Brand: Adafruit

The ACKme WiConnect Mackerel Evaluation Board (AMW004-E03) provides a quick way to evaluate and develop with the WiConnect WiFi platform using the surface-mount AMW004 Wallaby module. Designed by the team behind Rovin...

SKU: PL-1801 | Brand: Pololu

These premium wires are stranded 26 AWG wires with female terminals on one end and male terminals on the other end. Together with our 0.1″ crimp connector housings, these wires can be used to make custom cables with 0...

SKU: DF-SEN0002 | Brand: DFRobot

The URM04 Ultrasonic sensor is developed based upon our popular URM37 ultrasonic sensor, it is using RS485 interface which allows multiple sensors to be used simultaneously . The RS485 interface allows a number of...

SKU: DF-DFR0057 | Brand: DFRobot

This Sensor/Motor Drive Board (Cortex M3 CPU) is the integration of multiple communication interfaces that quickly build robotic systems. This board (Cortex M3 CPU) features the SPI Interface and works as a bridge ...

SKU: DF-DFR0069 | Brand: DFRobot

This DFRduino FIO is Discontinued Now, We recommend other best selling arduino boards as a suitable replacement. The DFRduino Funnel I/O (Fio) is a board based on the original design of Arduino FIO. It is 100% com...

SKU: DF-DFR0032 | Brand: DFRobot

Here is the simplest sound making module that you can use High/Low to drive it. Just change the frequency it buzz, you can hear different sound. It is widely used on your daily application, like PC, refrigerator,...

SKU: AF-845 | Brand: Adafruit

Need some big indicators? We are big fans of these huge diffused red LEDs. They are fairly bright so they can be seen in daytime, and from any angle. They go easily into a breadboard and will add that extra zing to yo...

SKU: AF-844 | Brand: Adafruit

These large 10mm diffused green LEDs provide bright, wide-angle visibility that's easy to see even in daylight. The diffused lens spreads light evenly for a clean glow from any viewing angle, making them ideal as stat...

SKU: AF-847 | Brand: Adafruit

Need some big indicators? We are big fans of these huge diffused blue LEDs. They are really bright so they can be seen in daytime, and from any angle. They go easily into a breadboard and will add that extra zing to y...

SKU: TB-PS0376 | Brand: Little Bird

A 4-pin mini DIN panel-mount socket (S-Video / S-VHS type) with nickel-plated copper construction. The socket requires a 10mm panel cutout and uses solder tag termination for secure, permanent connections. Specificat...

SKU: PL-1756 | Brand: Pololu

These premium jumper wires are stranded 26 AWG wires with female terminations on one end and male terminations on the other end, for use with 0.1″ (2.54 mm) headers, connectors, and solderless breadboards. ...

SKU: AF-2010 | Brand: Adafruit

Note: The Pro Trinket's bit-bang USB technique is a legacy approach that may not work reliably with modern operating systems. For new projects, consider an ItsyBitsy or Metro Mini board with native USB support at a c...

SKU: AF-868 | Brand: Adafruit

A hands-on project book by Simon Monk featuring 30 practical Arduino-based builds. Each project uses easy-to-find components and step-by-step instructions, making it accessible even without prior programming experienc...

SKU: DF-DFR0072 | Brand: DFRobot

At sometime or another you may run out of pins on your Arduino board and need to extend it with shift registers.  With this shift out module which is based on 74HC595. The datasheet refers to the 74HC595 as an "8...

SKU: SF-ROB-12405 | Brand: SparkFun

These wheel adaptors allow you to adapt 12mm hex drive wheels to our .770” hub pattern. The recessed .770” pattern allows you to run 6-32 socket head screws into any .770” hub or component that utilizes the .770” hub ...

SKU: AF-715 | Brand: Adafruit

The Adafruit I²C Controlled + Keypad Shield Kit lets you drive a 16×2 character LCD and read 5 navigation buttons using only two I²C pins on your Arduino. This frees up the 9+ digital pins that a standard LCD connecti...

SKU: DF-FIT0066 | Brand: DFRobot

A 10-pack of M3 × 10mm nylon standoffs with matching screws and nuts. Nylon standoffs are non-conductive, making them ideal for isolating circuit boards from metal chassis or other conductive surfaces without risking ...

SKU: DF-FIT0078 | Brand: DFRobot

A double-layer 6×AA battery holder with a stacked 3+3 cell arrangement for a more compact footprint. Creates a 7.2V rechargeable battery pack from NiMH/NiCd cells or a 9V pack from alkaline cells. Comes with 150mm (6"...

SKU: SF-PRT-09387 | Brand: SparkFun

A pack of 10 premium male-to-male jumper wires, 12" (30cm) long. Compatible with breadboards, Arduino headers, and any 0.1" (2.54mm) pitch prototyping board. Assorted colours for easy circuit identification. Specific...

SKU: SF-PRT-09388 | Brand: SparkFun

This is a SparkFun exclusive! These are 12" long jumper wires terminated as male to male. Use these to jumper from any female header on any board. Multiple jumpers can be connected next to one another on a 0.1...