All Products
Browse the full range of electronics, components, and maker supplies available at Little Bird Electronics. From microcontrollers and sensors to connectors, tools, and development boards — everything you need for your next project is right here.
Whether you're a hobbyist, educator, student, or professional engineer, our catalogue covers robotics, IoT, STEM kits, 3D printing accessories, and thousands of electronic components with fast shipping across Australia.
Diffused Yellow 10mm LED (25 pack)
SKU: AF-3260 | Brand: Adafruit
Need some big indicators? We are big fans of these huge diffused yellow LEDs. They are fairly bright so they can be seen in daytime, and from any angle. They go easily into a breadboard and will add that extra zing to...
Delivered by Mon 23 Nov
Mega Pro Mini Cable - 8 (8-wire)
SKU: SF-PRT-10853 | Brand: SparkFun
This is a wire assembly terminated with the same 8-pin JST-SH connector which is on the Mega Pro Mini. Pick up a few of these to break out all of those pesky pins. Integrating these connectors into your projects ma...
Delivered by Mon 23 Nov
20.4:1 Metal Gearmotor 25Dx50L mm HP 12V with 48 CPR Encoder
SKU: PL-3215 | Brand: Pololu
A high-power 12V brushed DC gearmotor with a 20.4:1 metal spur gearbox and integrated 48 CPR quadrature encoder. The encoder on the motor shaft provides 979.62 counts per revolution of the gearbox output shaft, enabli...
Delivered by Mon 23 Nov
EL Panel - Blue-Green (10x10cm)
SKU: SF-COM-10800 | Brand: SparkFun
Who doesn’t love the soft glow of electroluminescence? This EL panel is a flexible plastic sheet which contains a phosphor layer and lights up with a neon-like glow when the proper voltage is applied. It’s a lot like ...
Delivered by Mon 23 Nov
EL Panel - Blue (10x10cm)
SKU: SF-COM-10798 | Brand: SparkFun
A flexible electroluminescent (EL) panel that emits a soft, neon-like blue glow when driven by an EL inverter. The 10 × 10 cm panel is thin and lightweight, making it ideal for backlighting, illuminated signage, costu...
Delivered by Mon 23 Nov
7 Piece Screwdriver Set
SKU: TB-TD2022 | Brand: Little Bird
A quality set of 7 insulated screwdrivers in a storage case, GS and DVE tested and approved to 1000V. Featuring red handles with insulation right to the tip for safe, easy identification among your tools. Compliant wi...
Delivered by Mon 23 Nov
EL Tape - Blue/Green (1m)
SKU: SF-COM-10795 | Brand: SparkFun
Who doesn’t love the soft glow of electroluminescence? This EL tape is a flexible plastic ribbon which contains a phosphor layer and lights up with a neon-like glow when the proper voltage is applied. It’s a lot like ...
Delivered by Mon 23 Nov
0.1 (2.54mm) Crimp Connector Housing: 2x13-Pin 5-Pack
SKU: PL-1969 | Brand: Pololu
These 2×13-pin crimp connector housings let you quickly build custom cables that mate with standard 0.1" (2.54mm) spaced connectors. Pair them with pre-crimped terminal wires to create reliable, removable 26-wire conn...
Delivered by Mon 23 Nov
Open source hardware - Skill badge, iron-on patch
SKU: AF-477 | Brand: Adafruit
Show your support for the open-source hardware movement with this embroidered iron-on patch featuring the Open Source Hardware (OSHW) logo. Originally created for the 2011 Open Hardware Summit, this badge is a great w...
Delivered by Mon 23 Nov
Micro-controllers - Skill badge, iron-on patch
SKU: AF-484 | Brand: Adafruit
An embroidered skill badge celebrating the achievement of learning microcontrollers — from Arduino and Raspberry Pi to ARM, PIC, and beyond. A fun way to recognise and reward skill-building in classrooms, workshops, m...
Delivered by Mon 23 Nov
Standoff - Metal (1, 4-40, 10 pack)
SKU: SF-PRT-10738 | Brand: SparkFun
These metal hex standoffs raise your development board or proto board off the work surface for protection and airflow. With a #4-40 thread, they fit most boards with standard mounting holes. Specifications Length: ...
Delivered by Mon 23 Nov
Standoff - Metal (4-40; 3/8; 10 pack)
SKU: SF-PRT-10739 | Brand: SparkFun
Metal short standoffs: 3/8" long x ¼"OD. Used to get your proto board up off the table. #4-40 thread. Fits all development boards with available holes. Don’t forget the screws! Related below. Note: These are sold as a...
Delivered by Mon 23 Nov
ESP32 WiFi-BT-BLE MCU Module / ESP-WROOM-32
SKU: AF-3320 | Brand: Adafruit
The ESP-WROOM-32 is Espressif's flagship WiFi + Bluetooth Classic + BLE module, built around the dual-core Tensilica LX6 microprocessor. It targets a wide variety of applications from low-power sensor networks to dema...
Delivered by Mon 23 Nov
RGB backlight positive LCD 20x4 + extras [black on RGB]
SKU: AF-499 | Brand: Adafruit
This 20×4 character LCD features black text on a full-colour RGB backlight that you can set to any colour — red, green, blue, purple, teal, white, and everything in between. It's the most daylight-readable character L...
Delivered by Mon 23 Nov
Soldering Tip - Hakko - Conical (T18-B)
SKU: SF-TOL-10721 | Brand: SparkFun
This is a replacement soldering tip for our Hakko FX-888 soldering iron. This is a conical type of soldering tip. Replacing the tip is very easy - simply unscrew the shield, slip the replacement tip in, and screw t...
Delivered by Mon 23 Nov
SparkFun Digital Sandbox Add-On
SKU: SF-KIT-12963 | Brand: SparkFun
The SparkFun Digital Sandbox Add-On kit extends the Digital Sandbox (DS) learning platform with three additional circuit experiments. Build an electric musical instrument, control motor speed, and drive a servo — perf...
Delivered by Mon 23 Nov
Weather Station Kit with Anemometer/Wind Vane/Rain Bucket
SKU: DF-SEN0186 | Brand: DFRobot
INTRODUCTION Ever want to build your own weather station? This iot weather station kit includess anemometer, wind vane and rain bucket. The serial communication method provides good compatibility and ma...
Delivered by Mon 23 Nov
4.3 Inch E-Paper 800x600
SKU: DF-DFR0369 | Brand: DFRobot
This 4.3-inch e-ink display module from DFRobot supports 800×600 resolution and communicates via serial (UART), making it straightforward to integrate with microcontrollers. It features built-in Chinese and English fo...
Delivered by Mon 23 Nov
Expansion Shield X300 for Raspberry Pi B+/2B/3B
SKU: DF-DFR0358 | Brand: DFRobot
The X300 Expansion Shield is a feature-rich add-on board for the Raspberry Pi B+, 2B, and 3B. It integrates a wide range of connectivity and multimedia functions including SATA, WiFi, Bluetooth, a real-time clock, aud...
Delivered by Mon 23 Nov
SparkFun Power Driver Shield Kit
SKU: SF-DEV-10618 | Brand: SparkFun
The SparkFun Power Driver Shield Kit lets you switch high-current loads directly from your Arduino using six RFP30N06LE N-channel MOSFETs. Connect a computer power supply or other DC source to drive motors, solenoids,...
Delivered by Mon 23 Nov
Compare your options
All buying guides
The Teacher's Guide to micro:bit Robots: Kits, Buggies, and Robotics Compared
Compare micro:bit-compatible robot kits, buggies, and robotics platforms by age range, assembly difficulty, sensors, and curriculum fit — for classrooms, clubs, and home learners across Australia.
49 products compared
The Maker's Guide to Servos: Torque, Speed, and Control Compared
Compare hobby and industrial servos by torque, rotation range, and control type (PWM, digital, continuous) to pick the right motor for robotics, animatronics, and RC projects.
16 products compared
Title The Maker's Guide to ADCs: Resolution, Speed, and Interface Compared
Compare analogue-to-digital converters by bit depth, sample rate, and bus (I²C vs SPI) to pick the right chip for your Arduino, Raspberry Pi, or microcontroller project.
16 products compared