All Products

SKU: SF-PRT-08535 | Brand: SparkFun

This 2×5 (10-pin) IDC ribbon cable with 2.54 mm pitch connectors is commonly used for AVR ISP programming and general-purpose communication between boards. The cable is 6 inches (approximately 15 cm) in length. Key F...

SKU: SF-PRT-08506 | Brand: SparkFun

A 2×5 (10-pin) shrouded box header on standard 0.1" (2.54 mm) pitch. The keyed shroud prevents reversed cable connections, making it ideal for programming headers, data buses, and other multi-pin interfaces. Key Feat...

SKU: SF-DEV-08463 | Brand: SparkFun

This is a small buzzer for the LilyPad system. Use 2 I/O pins on the LilyPad main board and create different noises based on the different frequency of I/O toggling. Loud enough to hear inside a pocket but not obtrusi...

SKU: TB-XC4392 | Brand: Little Bird

The Arduino Compatible Long Range LoRa Shield turns your Arduino into a LoRa wireless node capable of transmitting and receiving data over several kilometres — without the need for a GSM network. Built around the Semt...

SKU: SF-TOL-12033 | Brand: SparkFun

A parts kit for building or repairing an additional arm on the SparkFun Third Hand soldering helper. Includes alligator clips and the hardware needed to convert a coolant hose segment into a flexible helping hand. Id...

SKU: AF-2995 | Brand: Adafruit

The Feather M0 Bluefruit LE combines an ATSAMD21G18 ARM Cortex M0 processor with a Bluetooth Low Energy module, native USB, and LiPo battery charging. With the power of a 48 MHz ARM core and 256KB of flash, it provide...

SKU: SF-PRT-08233 | Brand: SparkFun

A 2-pin polarised male header with 0.1″ (2.54 mm) pin spacing, designed for PCB and perfboard mounting. The keyed housing prevents reversed connections, making it ideal for power and sensor wiring where correct polari...

SKU: SF-COM-12023 | Brand: SparkFun

Gone are the days that you have to worry about silicone weather proofing splitting and breaking on you! These are sealed non-addressable 1 meter long RGB LED strips that come packed with 60 5060 LEDs per meter. Eac...

SKU: SF-PRT-08095 | Brand: SparkFun

Polarized connectors and headers for your perf board/PCB projects. Use these connectors for power connections or any sensor/general connection to prevent users from connecting the peripheral incorrectly or reversed. T...

SKU: SF-COM-12021 | Brand: SparkFun

These are bare non-addressable 1 meter long RGB LED strips that come packed with 60 5060 LEDs per meter. As these are bare LED strips that have no protective coating, your project won’t be water proof but there is acc...

SKU: SF-COM-08034 | Brand: SparkFun

A standard DIP switch with 8 individual switch positions at 0.1″ (2.54mm) pin spacing. Fits directly into breadboards and standard PCB through-holes for easy prototyping and configuration. Specifications Positions ...

SKU: SF-WRL-13982 | Brand: SparkFun

This ANT700 is a telescopic antenna designed for operation from 300 MHz to 1.1 GHz with a total length that is configurable from 9.5 cm to 24.5 cm. Each ANT700 is constructed of stainless steel and features an SMA mal...

SKU: SF-COM-11975 | Brand: SparkFun

A heavy-duty, panel-mount latching pushbutton with an illuminated white LED ring. Built from stainless steel with IP65 weatherproofing, this 16mm threaded switch is designed to withstand tough environments while deliv...

SKU: SF-COM-11972 | Brand: SparkFun

This is a perfect choice if you are in need of a heavy duty push button! These metal push buttons are a very tough, small, panel-mount latching switch with an illuminated blue LED ring. It is a SPDT with 16mm threa...

SKU: SF-COM-11970 | Brand: SparkFun

This is a perfect choice if you are in need of a heavy duty push button! These metal push buttons are a very tough, small, panel-mount momentary switch with an illuminated white LED ring. It is a SPDT with 16mm thread...

SKU: TB-RR0564 | Brand: Little Bird

A pack of 8 metal film resistors rated at 470Ω and 0.5W (½W). These through-hole axial resistors offer 1% tolerance for accurate circuit design, and are the same physical size as standard ¼W carbon film resistors, mak...

SKU: SF-PRT-00553 | Brand: SparkFun

A row of right angle male headers - break to fit. 40 pins that can be cut to any size. Used with custom PCBs or general custom headers.

SKU: SF-PRT-00548 | Brand: SparkFun

Ever wanted to see what’s on that SIM card? Use these sockets in your next project to interface to any old SIM. 6-Pin standard connection. This is a surface mount socket, but it is large enough that it can be hand sol...

SKU: SF-COM-00534 | Brand: SparkFun

Standard frequency crystals - use these crystals to provide a clock input to your microprocessor. Rated at 20pF capacitance and +/- 50ppm stability. Low profile HC49/US Package.

SKU: TB-ZZ8978 | Brand: Little Bird

A blank 13.56MHz RFID/NFC card with 1KB of data storage, compatible with common RFID reader modules and many NFC-enabled Android phones. This standard credit-card-sized card operates at 13.56MHz and is ideal for acce...