All Products
Browse the full range of electronics, components, and maker supplies available at Little Bird Electronics. From microcontrollers and sensors to connectors, tools, and development boards — everything you need for your next project is right here.
Whether you're a hobbyist, educator, student, or professional engineer, our catalogue covers robotics, IoT, STEM kits, 3D printing accessories, and thousands of electronic components with fast shipping across Australia.
Pimoroni Pico Plus 2 W
SKU: PI-PIM726 | Brand: Pimoroni
A top of the line Pirate-brand RP2350 microcontroller with all the goodies - 16MB of flash, 8MB of PSRAM, USB-C, Qw/ST and 2.4GHz wireless / Bluetooth.We adore the versatility and value of Raspberry Pi Pico but we als...
Delivered by Fri 12 Jun
Micro bit DRV8833 Motor Driver Expansion Board
SKU: KS-KS4033 | Brand: Keyestudio
The micro:bit DRV8833 Motor Driver Expansion Board adds dual DC motor control to the BBC micro:bit. Built around the DRV8833CPWP motor driver IC, it can output up to 700 mA per channel with four control modes: clockwi...
Delivered by Fri 12 Jun
Adafruit ESP32-C6 Feather - STEMMA QT
SKU: AF-5933 | Brand: Adafruit
The Adafruit ESP32-C6 Feather is built around Espressif's first Wi-Fi 6 SoC, combining 2.4 GHz Wi-Fi 6, Bluetooth 5 (LE), and 802.15.4 (Zigbee/Thread) in a single chip. The addition of 802.15.4 support makes it well-s...
Delivered by Fri 12 Jun
GSM/GPRS/GNSS/Bluetooth HAT for Raspberry Pi
SKU: WS-13460 | Brand: Waveshare
NOTE: This product is only 2G Compatible! Unfortunately while there are still 2G networks in some parts of America and Europe, there are no longer 2G networks in Australia anymore.Prohibited by the module manufact...
Delivered by Fri 12 Jun
Relegendable Plastic Keycaps for MX Compatible Switches 10 pack
SKU: AF-5039 | Brand: Adafruit
A 10-pack of two-part relegendable plastic keycaps compatible with Cherry MX and MX-compatible switches. Each keycap consists of an off-white base and a clear snap-on cover — simply remove the cover, insert a custom l...
Delivered by Fri 12 Jun
micro:bit Smart City Kit (Without micro:bit board)
SKU: EF-EF08252 | Brand: ElecFreaks
The Smart City Kit has a well-selection of IoT:bit, DHT11 sensor, soil moisture sensor, water level sensor, sonar:bit, servos and etc., we could use it to build such themes as the smart parking lot, transportation ...
Delivered by Fri 12 Jun
DC-DC Buck Converter 6~14V to 5V/8A
SKU: DF-DFR0753 | Brand: DFRobot
This 40W high power DC-DC Buck converter offers a 6~14V input voltage range and up to 5V/8A output. Featuring a small body, high conversion ratio, strong heat dissipation, and large current output, the module is compa...
Delivered by Fri 12 Jun
micro:bit v2 Go Bundle
SKU: SF-DEV-17288 | Brand: SparkFun
The BBC micro:bit v2 is a pocket-sized computer that lets you get creative with digital technology. Each order contains just the micro:bit v2 board. You can code, customize and control your micro:bit from anywhere! Yo...
Delivered by Fri 12 Jun
Teensy 4.0 (Headers)
SKU: SF-DEV-16997 | Brand: SparkFun
Teensy 4.0 features an ARM Cortex-M7 processor at 600MHz, with a NXP iMXRT1062 chip, the fastest microcontroller available today. Teensy 4.0 is the same size and shape as Teensy 3.2, and retains compatibility with mos...
Delivered by Fri 12 Jun
Mechanic-Loader for micro: Maqueen
SKU: DF-ROB0156-L | Brand: DFRobot
Note: Maqueen, micro:bit board and battery are not included. Maqueen Loader includes a set of mechanical parts that can turn Maqueen into a loader. This kit contains all the spare parts, such as, metal servo, mecha...
Delivered by Fri 12 Jun
Adafruit Micro-Lipo Charger for LiPoly Batt with USB Type C Jack
SKU: AF-4410 | Brand: Adafruit
The Adafruit Micro-Lipo Charger is a tiny, easy-to-use charger for single-cell 3.7V/4.2V lithium polymer and lithium ion rechargeable batteries. Simply plug a USB-C cable into any USB power source and connect your bat...
Delivered by Fri 12 Jun
Adafruit 16-Channel PWM / Servo Bonnet for Raspberry Pi
SKU: AF-3416 | Brand: Adafruit
The Adafruit 16-Channel PWM/Servo Bonnet adds precision servo and PWM control to your Raspberry Pi. Using the PCA9685 I2C PWM controller, it drives up to 16 servos or PWM outputs simultaneously with 12-bit resolution ...
Delivered by Fri 12 Jun
Massive Arcade Button with LED - 100mm White
SKU: AF-1187 | Brand: Adafruit
OMG WATCH OUT! This 100mm diameter arcade button with a 10mm deep plastic base is so massive and inviting it may collapse upon itself and form a black hole from which not even light can escape! Until it does, howe...
Delivered by Fri 12 Jun
Electret Microphone Amplifier - MAX9814 with Auto Gain Control
SKU: AF-1713 | Brand: Adafruit
Add an ear to your project with this well-designed electret microphone amplifier with AGC. This fully assembled and tested board comes with a 20-20KHz electret microphone soldered on. For the amplification, we use th...
Delivered by Fri 12 Jun
Adafruit NeoPixel Ring - RGB LED w/ Integrated Drivers - 16 pixel
SKU: AF-1463 | Brand: Adafruit
Round and round they go! 16 ultra-bright smart RGB NeoPixels are arranged in a circle with a 44.5 mm (1.75″) outer diameter. Each LED is individually addressable from a single microcontroller pin, delivering 24-bit co...
Delivered by Fri 12 Jun
Adafruit Perma-Proto HAT for Pi Mini Kit - No EEPROM
SKU: AF-2310 | Brand: Adafruit
The Adafruit Perma-Proto HAT for Pi Mini Kit is a full-sized prototyping daughter board for any Raspberry Pi with a 2×20 GPIO header (Pi Zero, A+, B+, Pi 2, 3, 4, 5). It provides a grid of 0.1″ soldering holes connect...
Delivered by Fri 12 Jun
Gravity:DIGITAL IR Transmitter Module
SKU: DF-DFR0095 | Brand: DFRobot
An infrared transmitter is simply a Light Emitting Diode which generates IR light (invisible IR light)--light with a wavelength of between 1 mm and 750 nanometers, and some associated circuitry. In an infrared ...
Delivered by Fri 12 Jun
Tactile Button switch (6mm) x 20 pack
SKU: AF-367 | Brand: Adafruit
Little clicky switches are standard input "buttons" on electronic projects. These work best in a PCB but can be used on a solderless breadboard as shown in this tutorial. The pins are normally open (disconnected) a...
Delivered by Fri 12 Jun
Schottky Diode
SKU: SF-COM-10926 | Brand: SparkFun
A 1N5819 Schottky diode rated at 1A and 40V. Schottky diodes are characterised by their low forward voltage drop (typically ~0.3V) and very fast switching speed, making them ideal for flyback protection on motor drive...
Delivered by Fri 12 Jun
Tactile Button Assortment
SKU: SF-COM-10302 | Brand: SparkFun
These tactile buttons are great for all sorts of projects. This assortment comes with 2 of each of 6 different colors for a total of 12 buttons. The colored caps are removable and the buttons fit into breadboards. ...
Delivered by Fri 12 Jun
Compare your options
All buying guides
The Teacher's Guide to micro:bit Robots: Kits, Buggies, and Robotics Compared
Compare micro:bit-compatible robot kits, buggies, and robotics platforms by age range, assembly difficulty, sensors, and curriculum fit — for classrooms, clubs, and home learners across Australia.
49 products compared
The Maker's Guide to Servos: Torque, Speed, and Control Compared
Compare hobby and industrial servos by torque, rotation range, and control type (PWM, digital, continuous) to pick the right motor for robotics, animatronics, and RC projects.
16 products compared
Title The Maker's Guide to ADCs: Resolution, Speed, and Interface Compared
Compare analogue-to-digital converters by bit depth, sample rate, and bus (I²C vs SPI) to pick the right chip for your Arduino, Raspberry Pi, or microcontroller project.
16 products compared