All Products

SKU: SF-SEN-14722 | Brand: SparkFun

This SparkFun Distance Sensor Breakout utilizes the VL53L1X next generation ToF (Time of Flight) sensor module to give you the highly accurate measurements at long ranges for its size. The VL53L1X uses a VCSEL (V...

SKU: DF-DFR0033 | Brand: DFRobot

what's the best way to detect the magnet? Use anther magnet. But it's not sensitive enough. You have to feel it by youself.Right.This magnetic sensor knows whether there is a magnetic object nearby or not. And it c...

SKU: DF-FIT0032 | Brand: DFRobot

INTRODUCTIONA This bracket is designed for Gravity: Arduino Adjustable Infrared Distance Sensor which can be used for the obstacle avoidance or objection detection. It provides a easy ins...

SKU: AF-920 | Brand: Adafruit

This RF adapter bit is great for anyone doing RF work. Depending on the dev-board and antenna you have, you may be faced with either RP-SMA or SMA connectors. Unfortunately they are not compatible! This adapter sol...

SKU: SF-GPS-14414 | Brand: SparkFun

The SparkFun XA1110 GPS Breakout is a small I2C-supported module built for easy hookup, thanks to our Qwiic Connect System. Equipped with the XA1110 GPS module from GTOP, this board utilizes the MediaTek MT3333 chips...

SKU: DF-ROB0147 | Brand: DFRobot

Max:Bot An entry-level DIY robot that maximizes children’s creativityWhat is Max:Bot?Max:Bot is a programmable toy for 8+ years old kids to learn about robotics.Learn RoboticsCreate your kid’s own inventionRoboti...

SKU: AF-1250 | Brand: Adafruit

Upgrade your Hakko with a new tip, you'll get better & faster solder joints and the whole process will be much more enjoyable. This tip fits the FX-888 analog and digital irons, and they're fast to swap, takes only 30...

SKU: MR-CB-KT-DISCOVERY-1 | Brand: Modular Robotics

Better thinking through play.The Cubelets Discovery Set is the perfect introduction to the world of Cubelets® robot blocks. Open a box of little robots that will intrigue, fascinate, and inspire builders for hours on ...

SKU: AF-1460 | Brand: Adafruit

A versatile NeoPixel strip with 30 individually addressable RGB LEDs per metre on a flexible black PCB, supplied in a 5-metre length (150 LEDs total). Each pixel offers full 24-bit colour control with only a single da...

SKU: AF-546 | Brand: Adafruit

A little bundle to get you started! This project pack contains: 2.5 meters (over 8 ft) of high-brightness, long-life EL wire in White. 2.5 meters is the maximum amount for the pocket driver - it is cut and solder...

SKU: MR-CB-KT-SPEAKER-1 | Brand: Modular Robotics

The Speaker Cubelet contains a small speaker and an amplifier that will chirp according to the block’s data value. Cubelets are magnetic blocks that can be snapped together to make an endless variety of robots. You...

SKU: MR-CB-KT-FLASHLIGHT-1 | Brand: Modular Robotics

The Flashlight Cubelet is an action block for the Cubelets modular robotics system. It emits a focused beam of white light from a powerful LED, with brightness proportional to its input value — high input means bright...

SKU: DF-SEN0249 | Brand: DFRobot

The Gravity Spear Tip pH Sensor Kit is designed for measuring the pH of semi-solid materials such as wet soil, fruit, meat, and vegetables. The stainless steel spear tip protects the glass electrode and allows the pro...

SKU: MR-CB-KT-INVERSE-1 | Brand: Modular Robotics

The Inverse Cubelet is a "think" block in the Cubelets modular robotics system. It calculates the opposite of the values it receives — averaging its inputs and outputting one minus that average. Use it to create robot...

SKU: MR-BRIGHT | Brand: Modular Robotics

The Brightness Cubelet has an analog photocell that responds to varying light conditions and detects the amount of light hitting it’s sensor. Expect values near zero in a dark room, and values near one when the ...

SKU: MR-CB-KT-DISTANCE-1 | Brand: Modular Robotics

The Distance Cubelet detects how far it is from an object. It uses infrared light and is accurate between 10 and 80 cm. The sensor is directional, so outputs the distance to the object in front of the sensor. At...

SKU: SF-KIT-14526 | Brand: SparkFun

The Pi Zero USB Stem is a PCB kit that turns a Raspberry Pi Zero into a USB dongle. Once the Stem is installed, your Raspberry Pi can be plugged directly into a computer or USB hub without any additional cables or pow...

SKU: AF-1712 | Brand: Adafruit

A mini class D with AGC and I2C control? Yes please! This incredibly small stereo amplifier is surprisingly powerful. It is able to deliver 2 x 2.8W channels into 4 ohm impedance speakers (@ 10% THD) and it has a i2c ...

SKU: AF-1751 | Brand: Adafruit

This 9.7" IPS TFT display module is the same ultra-high pixel density retina panel found in iPad 3 and 4 tablets. With a 2048×1536 resolution, it delivers incredibly sharp visuals for custom monitor builds and embedde...

SKU: AF-1773 | Brand: Adafruit

This 50-pin top-contact FPC connector is a surface-mount component for connecting 0.5mm pitch FPC/FFC cables to your custom PCB. It's compatible with many 50-pin displays including 2.8″ TFT panels with resistive touch...