All Products

SKU: LB-00300 | Brand: Little Bird

The Little Bird Uno R3, is a 100% Arduino™ compatible development board.Just like the original Arduino Uno the Arduino Shield compatible design makes adding expansion boards easy.This Arduino can be powered from 7-12...

SKU: LB-LR0109 | Brand: Little Bird

Add Bluetooth functionality to your project with the HC-05 Bluetooth Module. The module is found on a breakout board which provides breadboard-friendly headers for power, ground, TX, RX and enable pins. The breakou...

SKU: DF-DFR0198 | Brand: DFRobot

This is a waterproofed version of the DS18B20 Temperature sensor. Handy for when you need to measure something far away, or in wet conditions. While the sensor is good up to 125°C the cable is jacketed in PV...

SKU: DF-DFR0063 | Brand: DFRobot

This is an 16x2 LCD display screen with with I2C interface. It is able to display 16x2 characters on 2 lines, white characters on blue background. Usually, Arduino LCD display projects will run out of pin resources...

SKU: EC-WRF24010R | Brand: Elecrow

This module uses the newest 2.4GHz transceiver from Nordic Semiconductor, the nRF24L01.This transceiver IC operates in the 2.4GHz band and has many new features! Take all the coolness of the nRF2401A and add some e...

SKU: DF-DFR0836 | Brand: DFRobot

Note: The product not inclueded Raspberry Pi Pico. This IO expansion board brings out all IO pins of the Raspberry Pi Pico onto male and female connectors. All pins are clearly labeled to allow beginners to quick...

SKU: WS-25081 | Brand: Waveshare

A compact ESP32-S3 development board based on the ESP32-S3FH4R2 dual-core processor running at up to 240MHz. Features 4MB flash, 2MB PSRAM, 2.4GHz Wi-Fi (802.11 b/g/n), and Bluetooth 5 (LE). The castellated module des...

SKU: LB-LR0062 | Brand: Little Bird

This IR sensor can detect obstacles in front of it.  When an object is detected the green indicator light on the board will light up. There is a low-level output signal on the OUT port.It has a detection range of...

SKU: LB-FLAME-LIGHT | Brand: Little Bird

This IR flame sensor module detects flames and infrared light sources in the 760–1,100 nm wavelength range. With a detection angle of approximately 60° and a test range of up to 80 cm (depending on flame size), it pro...

SKU: WS-25452 | Brand: Waveshare

A compact ESP32-C3 development board based on the ESP32-C3FN4 single-core RISC-V processor running at up to 160 MHz. With 2.4 GHz WiFi (802.11 b/g/n) and Bluetooth 5 (LE), 4 MB onboard flash, and a castellated module ...

SKU: SF-DEV-11021 | Brand: SparkFun

The Arduino Uno R3 is the most popular Arduino board and an ideal starting point for learning electronics and programming. Built around the ATmega328 microcontroller, it offers a robust platform for prototyping, inter...

SKU: EC-DIS08070H | Brand: Elecrow

CrowPanel ESP32 Display 7.0-inch module is a powerful HMI touch screen with 800*480 resolution LCD display. It uses the ESP32-S3-WROOM-1-N4R8 module as the main control processor, with a dual-core 32-bit LX6 microproc...

SKU: SF-DEV-11113 | Brand: SparkFun

It’s blue! It’s thin! It’s the Arduino Pro Mini! SparkFun’s minimal design approach to Arduino. This is a 5V Arduino running the 16MHz bootloader. Arduino Pro Mini does not come with connectors populated so that yo...

SKU: EC-ILM13205D2-915 | Brand: Elecrow

The Elecrow ThinkNode M5 is a high-performance LoRa communication device powered by the ESP32-S3 processor. Pre-installed with Meshtastic firmware and featuring the SX1262 wireless chip, it efficiently sends and recei...

SKU: DF-DFR0654-F | Brand: DFRobot

FireBeetle ESP32-E, specially designed forIoT, is an ESP-WROOM-32E-based main controller board with dual-core chips. It supports WiFi and Bluetooth dual-mode communication, and features small size, ultra-low power ...

SKU: SF-SEN-13879 | Brand: SparkFun

The SparkFun Load Cell Amplifier is a small breakout board for the HX711 IC that allows you to easily read load cells to measure weight. By connecting the amplifier to your microcontroller you will be able to read the...

SKU: DF-TEL0137 | Brand: DFRobot

This GPS receiver brings much more accurate and faster positioning performance with stronger signal compared with traditional GPS receivers. It is compact, lightweight and portable. Integrated with built-in receivin...

SKU: DF-DFR0154 | Brand: DFRobot

A 20×4 character I2C LCD display module compatible with Arduino and other microcontrollers. It shows white characters on a blue backlit background, and the I2C interface means you only need two data pins (SDA and SCL)...

SKU: WS-18995 | Brand: Waveshare

This GPIO header adapter is designed specifically for the Raspberry Pi 400, converting its rear-mounted 40-pin GPIO header into two standard 40-pin headers for easy expansion. The colour-coded header makes it simple t...

SKU: LB-LR0007 | Brand: Little Bird

Flame Detection Sensor Module for use with Arduino Sensor for flame wavelengths between 760 nm to 1100 nm infrared is most sensitive60 degree detection sensor   Two outputs mode: AO: analog output, real-time ou...