All Products
Browse the full range of electronics, components, and maker supplies available at Little Bird Electronics. From microcontrollers and sensors to connectors, tools, and development boards — everything you need for your next project is right here.
Whether you're a hobbyist, educator, student, or professional engineer, our catalogue covers robotics, IoT, STEM kits, 3D printing accessories, and thousands of electronic components with fast shipping across Australia.
ELECFREAKS Wukong2040 Breakout Board For Raspberry Pi Pico
SKU: EF-EF02054 | Brand: ElecFreaks
DescriptionWukong 2040 is a multifunctional Breakout Board designed for Raspberry Pi Pico. In terms of functions, it is equipped with a buzzer, A\B buttons, rainbow lights, motor interface, reset button, etc., to meet...
Delivered by Fri 12 Jun
ESP32-H2-DevKitM-1 - 4 MB Flash
SKU: AF-5715 | Brand: Adafruit
The ESP32-H2-DevKitM-1 is an entry-level development board based on the ESP32-H2-MINI-1 module, featuring Bluetooth Low Energy 5, IEEE 802.15.4, Thread, Matter, and Zigbee support on a single chip. It's an ultra-low-p...
Delivered by Fri 12 Jun
Adafruit IoT Button with NeoPixel BFF Add-On for QT Py and Xiao
SKU: AF-5666 | Brand: Adafruit
The Adafruit IoT Button with NeoPixel BFF adds a chunky 12 mm tactile button and an RGB NeoPixel to any QT Py or Xiao development board. It's a quick way to build simple IoT button projects with visual feedback — pres...
Delivered by Fri 12 Jun
Mini PIR Sensor with Time and Sensitivity Control - BS612
SKU: AF-5578 | Brand: Adafruit
The BS612 is a compact, fully configurable mini PIR motion sensor that detects movement from approximately 3–8 metres away with a 120° detection spread. Its small form factor makes it ideal for unobtrusive motion-sens...
Delivered by Fri 12 Jun
ESP32-S3-WROOM-1-N4 Module (PCB Antenna)
SKU: DF-DFR0896 | Brand: DFRobot
The ESP32-S3-WROOM-1-N4 is a powerful Wi-Fi and Bluetooth LE MCU module built around the ESP32-S3 SoC. Featuring a dual-core Xtensa LX7 processor running at up to 240MHz, 4MB SPI flash, and hardware acceleration for n...
Delivered by Fri 12 Jun
Gravity: 360 Degree Rotary Encoder Module
SKU: DF-SEN0502 | Brand: DFRobot
This looks like a potentiometer, but it’s an encoder switch. It is a cascadable 360 ° rotary encoder switch with 20 pulses per revolution, and each pulse corresponds to a detent. There are LED lights set for each dete...
Delivered by Fri 12 Jun
12mm Momentary Push Button Dome with Wires - White
SKU: LB-LS3381-W | Brand: Little Bird
A 12 mm panel-mount momentary push button with a smooth dome-shaped cap in white, pre-wired with 20 cm red and black leads for easy connection. Normally open — pressing the button closes the contacts. Key Features ...
Delivered by Fri 12 Jun
Adafruit QT Py ESP32-S2 WiFi Dev Board with uFL Antenna Port
SKU: AF-5348 | Brand: Adafruit
The Adafruit QT Py ESP32-S2 with uFL Antenna Port is the extended-range version of the QT Py ESP32-S2. Instead of an on-board antenna, it features a uFL connector so you can attach any 2.4 GHz Wi-Fi antenna for signif...
Delivered by Fri 12 Jun
Ethernet RJ45 Female Plug Terminal Block
SKU: DF-FIT0849 | Brand: DFRobot
This Ethernet RJ45 Female Plug to 8-Pin Terminal Block provides a solder-free way to break out an RJ45 Ethernet connection to individual screw terminals. The standard RJ45 port features a metal shielding layer for ele...
Delivered by Fri 12 Jun
Temperature Sensor - High Temperature, Waterproof (DS18B20)
SKU: SF-SEN-18367 | Brand: SparkFun
A sealed, waterproof DS18B20 digital temperature probe for precise measurements in wet or harsh environments. The sensor communicates over a 1-Wire interface, requiring just one data pin (plus ground) to connect to yo...
Delivered by Fri 12 Jun
Audio Stereo Decoder Module Board 3.3V - 5V
SKU: LB-LS1891 | Brand: Little Bird
HS1891 DAC Module CJMCU-1334 UDA1334A I2S DAC Audio Stereo Decoder Module Board 3.3V - 5V Feature: This fully-featured UDA1334A I2S Stereo DAC breakout is a perfect match for any I2S-output audio interface. ...
Delivered by Fri 12 Jun
ACS712 Current Sensor- 20A
SKU: EC-SEL71220A | Brand: Elecrow
A current sensing module based on the Allegro ACS712 Hall effect sensor, capable of accurately measuring both AC and DC current up to ±20 A. The module outputs a proportional analogue voltage that can be read directly...
Delivered by Fri 12 Jun
Patch Test Hook (10 Pack)
SKU: DF-FIT0720 | Brand: DFRobot
These patch test hooks provide a solderless way to make signal and low-current connections between boards, sensors, and modules. The hook clips grab onto pins, pads, and component legs — perfect for prototyping with c...
Delivered by Fri 12 Jun
Nano 168 (Arduino Compatible)
SKU: EC-MCA03168A | Brand: Elecrow
The Nano 168 is a compact, breadboard-friendly Arduino-compatible development board based on the ATmega168 microcontroller. It offers the same functionality as the Arduino Nano in a small DIP form factor, with 14 digi...
Delivered by Fri 12 Jun
Octopus Analog UV sensor (GUVA-S12SD)
SKU: EF-EF04093 | Brand: ElecFreaks
Octopus Analog UV sensor (GUVA-S12SD) is the UV electric brick in our Octopus series, the basic design is from the Octopus electric bricks and the setting of its outlook, the PCB fixing hole and the connectors are the...
Delivered by Fri 12 Jun
Octopus Soil Moisture Sensor Brick
SKU: EF-EF04027 | Brand: ElecFreaks
Octopus Soil Moisture Sensor Brick can read the amount of moisture present in the soil surrounding it. It's a low tech sensor, but ideal for monitoring an urban garden, or your pet plant's water level. This is a mu...
Delivered by Fri 12 Jun
Adafruit BMP388 - Precision Barometric Pressure and Altimeter
SKU: AF-3966 | Brand: Adafruit
The BMP388 from Bosch is a high-precision barometric pressure and temperature sensor, offering significantly improved altitude accuracy over the BMP280. With altitude noise as low as 0.1 metres and a relative accuracy...
Delivered by Fri 12 Jun
37 in 1 Sensor Kit for Arduino
SKU: LB-LR07 | Brand: Little Bird
A comprehensive collection of 37 different sensors and modules for Arduino, covering a wide range of inputs and outputs for electronics projects. Everything comes neatly organised in a clear plastic storage case. Fro...
Delivered by Fri 12 Jun
Grove Shield for micro:bit
SKU: SS-103030195 | Brand: Seeed Studio
The Grove Shield for micro:bit is a plug-and-play expansion board that bridges the micro:bit with the Seeed Studio Grove ecosystem. It provides 4 Grove connectors on-board (covering different interfaces) with provisio...
Delivered by Fri 12 Jun
Triple Axis Accelerometer ADXL345
SKU: DF-SEN0032 | Brand: DFRobot
Breakout board for the Analog Device ADXL345. The ADXL345 is a small, thin, low power, 3-axis accelerometer with high resolution (13-bit) measurement at up to ±16 g. Digital output data is formatted as 16-bit twos ...
Delivered by Fri 12 Jun
Compare your options
All buying guides
The Teacher's Guide to micro:bit Robots: Kits, Buggies, and Robotics Compared
Compare micro:bit-compatible robot kits, buggies, and robotics platforms by age range, assembly difficulty, sensors, and curriculum fit — for classrooms, clubs, and home learners across Australia.
49 products compared
The Maker's Guide to Servos: Torque, Speed, and Control Compared
Compare hobby and industrial servos by torque, rotation range, and control type (PWM, digital, continuous) to pick the right motor for robotics, animatronics, and RC projects.
16 products compared
Title The Maker's Guide to ADCs: Resolution, Speed, and Interface Compared
Compare analogue-to-digital converters by bit depth, sample rate, and bus (I²C vs SPI) to pick the right chip for your Arduino, Raspberry Pi, or microcontroller project.
16 products compared
