All Products

SKU: AF-1321 | Brand: Adafruit

A standard alkaline 9V battery for powering portable electronics projects, kits, and prototypes. These batteries use alkaline (MnO2) chemistry with a voltage range of 9.6V (fresh) to 4.8V (depleted). At a 50mA dischar...

SKU: AF-184 | Brand: Adafruit

Build your own breadboard-friendly adjustable power supply with this soldering kit. Based on the MIC2941 low-dropout regulator, it provides a guaranteed 1.25A output with only 40–400 mV dropout — far better than the L...

SKU: AF-875 | Brand: Adafruit

This 8×AA battery holder provides a portable power source with a built-in on/off switch and a standard 5.5 mm / 2.1 mm DC barrel plug for easy connection to Arduino boards, LED strips, motors, and other 12V devices. U...

SKU: AF-4711 | Brand: Adafruit

The AP3429A Buck Converter Breakout steps down 3.4–5.5V input to a stable 3.3V output at up to 1.2A, with 90–95% efficiency. It's ideal for powering 3.3V circuits from LiPo batteries, 3× alkaline cells, or USB power s...

SKU: AF-1400 | Brand: Adafruit

The Adafruit Push-button Power Switch Breakout lets you toggle DC power on and off with a simple button press. A latching analogue circuit uses a 3A P-FET to connect or disconnect the input to the output — press once ...

SKU: AF-1349 | Brand: Adafruit

A really tiny portable inverter for EL wire. Powers off of a single AAA battery (not included!), it can drive up to 50cm / 20 inches of our high-brightness EL wire or 10cm x 1cm long piece of EL tape for 3 hours (o...

SKU: AF-1589 | Brand: Adafruit

A 4700 µF electrolytic capacitor rated for up to 10V. This high-capacitance component is ideal for smoothing voltage spikes and providing current buffering in power supply circuits, servo systems, LED strips, and sola...

SKU: AF-3456 | Brand: Adafruit

This 5×AA battery holder delivers approximately 7.5V from five AA batteries, terminated with a 2.1mm DC barrel plug (centre positive). It provides the ideal voltage for Arduino boards and other development boards with...

SKU: AF-4552 | Brand: Adafruit

Power over Ethernet (PoE) splitters can make your project wiring a breeze - and best of all they work to connect any 802.3af-capable router to any Ethernet device, even if it doesn't natively support PoE! The splitter...

SKU: AF-1331 | Brand: Adafruit

Keep it cool with a Peltier module. These unique electronic components can generate a temperature differential when powered. That is to say, apply 5V to the red (positive) and black (negative) wires and one side will ...

SKU: AF-5644 | Brand: Adafruit

The Adafruit 12V Bias Voltage Boost Converter uses the TI TPS61040 to generate 12V DC from as little as 3V input. This compact breakout is ideal for generating the bias voltage needed by OLED displays, LED string back...

SKU: AF-5383 | Brand: Adafruit

This small, palm-sized battery power meter has a small display that shows off how much juice is left in your single Lithium Ion/Polymer rechargeable battery. The color display has four levels of power indication once ...

SKU: AF-1459 | Brand: Adafruit

This inductive charging set provides wireless power transfer using a split-transformer design. The transmitter coil is powered with 9–12 V DC, and the receiver coil outputs 3.3 V DC — no direct wire connection between...

SKU: AF-1570 | Brand: Adafruit

A compact 3.7 V lithium-ion polymer (LiPo) battery with approximately 100 mAh capacity (0.4 Wh). Thin, lightweight, and powerful, this cell is suited for small wearable projects, IoT devices, and compact electronics w...

SKU: AF-1794 | Brand: Adafruit

When you need to switch a lot of power, P channel MOSFETs are best for the job. These P-FETs can switch over 60V and 25A (with proper heat-sinking) and are TO-220 package so they fit nicely into any breadboard or perf...

SKU: AF-248 | Brand: Adafruit

A 6×AA battery holder with a 5.5mm/2.1mm DC barrel plug, ready to power Arduino boards and other electronics with a standard DC jack. Use alkaline AAs for approximately 9V at 3000–4000mAh, or rechargeable NiMH cells f...

SKU: AF-3238 | Brand: Adafruit

This IEEE 802.3af PoE splitter separates power and data from a single PoE Ethernet cable, providing regulated 12VDC at up to 1A on a standard 2.1 mm DC barrel jack alongside a standard Ethernet data connection. It let...

SKU: AF-425 | Brand: Adafruit

A 4-pin Molex power cable that matches the hard drive/CD-ROM power connectors found on AT and ATX power supplies. Use it to tap into 5V or 12V DC from a desktop power supply for your projects — a convenient source of ...

SKU: AF-617 | Brand: Adafruit

A 2-pack of standard alkaline AAA batteries for powering portable electronics, kits, and projects. These use alkaline (MnO2) chemistry with a voltage range of 1.6V (fresh) to 0.8V (depleted) and a capacity of approxim...