All Products

SKU: AF-2348 | Brand: Adafruit

The Adafruit DC & Stepper Motor HAT drives up to 4 DC motors or 2 stepper motors from your Raspberry Pi, with full PWM speed control. It uses a dedicated PWM driver chip over I2C, so only two pins (SDA/SCL) are needed...

SKU: AF-3722 | Brand: Adafruit

Not merely a snow globe, but a show globe! This custom container is durable, clear and round, with a large flat screw-on top and a press-fit rubber stopper. The stopper makes a nice seal, and is also hollow which m...

SKU: AF-5699 | Brand: Adafruit

The Raspberry Pi Debug Probe is an all-in-one USB-to-debug kit that provides all the necessary hardware and cables for easy, solderless, plug-and-play debugging. For when "printf-style-debugging" just isn't enough,...

SKU: AF-1405 | Brand: Adafruit

Get started with the fabulous Adafruit Flora platform with this lovely budget kit, just enough to get you started with this fun wearable computer. Included are enough parts to make your first wearable electronic pr...

SKU: AF-3346 | Brand: Adafruit

The Adafruit I2S 3W Stereo Speaker Bonnet adds high-quality digital audio output to any Raspberry Pi with a 2×20 GPIO header. Using the I2S digital sound standard, audio data goes directly to the onboard Class D ampli...

SKU: AF-184 | Brand: Adafruit

Build your own breadboard-friendly adjustable power supply with this soldering kit. Based on the MIC2941 low-dropout regulator, it provides a guaranteed 1.25A output with only 40–400 mV dropout — far better than the L...

SKU: AF-3599 | Brand: Adafruit

Transistors are powerful little electronic switches, and we really like these NPN and PNP transistors whenever we need to control medium-power electronics, such as small motors, solenoids, or IR LEDs. We find them so ...

SKU: AF-4423 | Brand: Adafruit

Totaling 560 pieces, this JST-XH Connector Kit is a must-have for your workstation. You'll have enough sockets and headers to fuel your maker tendencies for days on end!These connectors are really ...

SKU: AF-2340 | Brand: Adafruit

The Adafruit Capacitive Touch HAT adds 12 capacitive touch sensors to your Raspberry Pi using the MPR121 touch controller over I2C. Each sensor has a figure-8 hole designed for alligator clip connections — attach clip...

SKU: AF-4253 | Brand: Adafruit

The Adafruit Quad 2×2 FeatherWing Kit lets you connect one Feather board to three FeatherWings simultaneously in a compact 2×2 grid layout — no stacking headers needed. All four sets of Feather pins are cross-connecte...

SKU: AF-3816 | Brand: Adafruit

This bolt-on hardware kit provides M3 standoffs and screws for securely mounting a Circuit Playground Express, Circuit Playground Classic, micro:bit, Gemma M0, Flora, or other small circular/compact boards to your pro...

SKU: AF-4174 | Brand: Adafruit

These three Short Female Headers alone are, well, lonely. But pair them with any of our ItsyBitsy boards, and you're in business! These headers are particularly cute and tiny with a body height of just 5.0 mm th...

SKU: AF-3415 | Brand: Adafruit

We've got to hand it to the Pi Foundation - adding a camera port and built-in WiFi to the already awesome Pi Zero was a brilliant move. Now you can add one of the awesome Raspberry Pi cameras to your Pi Zero W t...

SKU: AF-1721 | Brand: Adafruit

A 24-bar bi-colour (red/green) LED bargraph kit with an I²C backpack controller. The backpack handles all LED multiplexing and drive, letting you control 48 LEDs (24 bars × 2 colours) from just two I²C pins. Constant-...

SKU: AF-1657 | Brand: Adafruit

Get started with Adafruit GEMMA with this lovely starter kit! Included is everything you need to make a basic project. There's a GEMMA board, four sewable bright RGB pixels, a battery holder and batteries, 2-p...

SKU: AF-715 | Brand: Adafruit

The Adafruit I²C Controlled + Keypad Shield Kit lets you drive a 16×2 character LCD and read 5 navigation buttons using only two I²C pins on your Arduino. This frees up the 9+ digital pins that a standard LCD connecti...