All Products

SKU: AF-616 | Brand: Adafruit

Give yourself some more room with an EL wire cable extender. This cable has a 2-pin JST SM plug on one end and receptacle on the other. Use it to extend the reach of EL wire, panel, tape, etc. The cable is a meter ...

SKU: AF-824 | Brand: Adafruit

Handy for making wire harnesses or jumpering between headers on PCB's. These premium jumper wires are 12" (300mm) long and come in a 'strip' of 40 (4 pieces of each of ten rainbow colors). They have 0.1" male he...

SKU: AF-1949 | Brand: Adafruit

These Female/Female Jumper Wires are handy for making wire harnesses or jumpering between headers on PCB's. These premium jumper wires are 12" (300mm) long and come in a 'strip' of 20 (2 pieces of each of ten rainb...

SKU: AF-825 | Brand: Adafruit

Handy for making wire harnesses or jumpering between headers on PCB's. These premium jumper wires are approximately 3" (75mm) long and come in a 'strip' of 40 (4 pieces of each of ten rainbow colors). They have 0.1...

SKU: AF-3554 | Brand: Adafruit

If you love DIY cable-rigging, then these HDMI adapters are right up your alley! Making custom HDMI cables has never been easier. Just grab one of our HDMI ribbon cables, then swap and switch any of our HDMI a...

SKU: AF-3563 | Brand: Adafruit

If you're looking to make a custom cable with any two of our HDMI adapters, then you'll need to have these flex cables handy! Making custom HDMI cables has never been easier. Just grab one of these cables...

SKU: AF-6182 | Brand: Adafruit

A 10-wire silicone-covered ribbon cable that's extremely supple and flexible. The silicone sheathing handles temperatures up to 200°C and voltages up to 600 V — far beyond what PVC-covered wire can manage. Pull and se...

SKU: AF-6070 | Brand: Adafruit

If you need to add a panel-mount connection that extends a micro SD card, this Round Panel Mount MicroSD Adapter Plug is the easiest and fastest way to panel-ify your project. The adapter is about 30mm in diameter, so...

SKU: AF-5468 | Brand: Adafruit

These DIY magnetic connectors let you add MagSafe-style snap-together connections to your own projects. Each set includes two matching halves with seven spring-loaded pogo pins at 2.2 mm pitch and embedded magnets tha...

SKU: AF-5391 | Brand: Adafruit

If you're messing around with floppy drives, or disk drives, or other devices that are usually powered with a PC motherboard you'll often see these big 'Molex' connectors used to provide power. They are used to give 5...

SKU: AF-4937 | Brand: Adafruit

A 5-pin ribbon-style jumper cable with 2.54mm (0.1") pitch connectors on both ends. A neat, reliable way to connect standard 0.1" header devices — perfboard, breadboards, breakout boards, and more — without using loos...

SKU: AF-4482 | Brand: Adafruit

These premium male-male jumper wires are handy for making wire harnesses or jumpering between headers on PCBs. They're 200mm (~7.8") long and come loose as a pack of 40 (10 pieces of red, blue, yellow, and Adafruit bl...

SKU: AF-4364 | Brand: Adafruit

Just about all electronics use a UART serial port with RX and TX pins for debugging, bootloading, programming, serial output, etc. But it's rare for a computer to have a serial port anymore. Thus, a serial cable is an...

SKU: AF-4150 | Brand: Adafruit

In this world nothing can be said to be certain, except we need headers, headers, and more headers!Each pack contains ten blue 36-pin 0.1" pitch break-away male headers.  These are a little extra special in that ...

SKU: AF-3663 | Brand: Adafruit

If your soldering isn't quite up to scratch, or you just don't own a soldering iron yet, then these nifty hammer headers from Pimoroni might be just what you need.  Absolutely no soldering required! All t...

SKU: AF-2104 | Brand: Adafruit

This 2x8 (16 pin - 0.1" spaced) IDC Breadboard Helper is great in conjunction with any 16-pin IDC cables. It comes in two parts, a 'pin-through' socket and a male header. The socket straddles...

SKU: AF-2101 | Brand: Adafruit

The "poor woman's" Raspberry Pi cobbler! This combo of 2x13 pin (0.1 spaced) header and socket is for our popular GPIO Ribbon Cable for Raspberry Pi Model A and B.  It comes in two parts, a 'pin-through' socke...

SKU: AF-2789 | Brand: Adafruit

The premise of this MicroUSB to 5.5/2.1mm DC Barrel Jack Adapter is simple. There's a MicroUSB plug on one end and a 5.5mm/2.1mm DC barrel jack with center positive polarity on the other. This allows you ...

SKU: AF-248 | Brand: Adafruit

A 6×AA battery holder with a 5.5mm/2.1mm DC barrel plug, ready to power Arduino boards and other electronics with a standard DC jack. Use alkaline AAs for approximately 9V at 3000–4000mAh, or rechargeable NiMH cells f...

SKU: AF-3310 | Brand: Adafruit

A 5.5×2.1mm DC barrel connector plug for adding a standard power connector to the end of your own wires. The outer shell unscrews to reveal solder terminals and a crimp strain relief, making it easy to wire up custom ...