All Products
Browse the full range of electronics, components, and maker supplies available at Little Bird Electronics. From microcontrollers and sensors to connectors, tools, and development boards — everything you need for your next project is right here.
Whether you're a hobbyist, educator, student, or professional engineer, our catalogue covers robotics, IoT, STEM kits, 3D printing accessories, and thousands of electronic components with fast shipping across Australia.
A4988 Stepper Motor Driver Carrier, Black Edition
SKU: PL-2128 | Brand: Pololu
The Black Edition of the A4988 stepper motor driver carrier features a four-layer PCB for better thermal performance, allowing the A4988 to deliver approximately 20% more current than the standard two-layer (green) ve...
Delivered by Fri 12 Jun
Tilt Sensor - AT407
SKU: SF-SEN-10289 | Brand: SparkFun
This AT407 basic tilt switch can easily be used to detect orientation. Inside the can is a ball that make contact with the pins when the case is upright. Tilt the case over and the balls don’t touch, thus not making a...
Delivered by Fri 12 Jun
DRV8874 Single Brushed DC Motor Driver Carrier
SKU: PL-4035 | Brand: Pololu
This compact breakout board for TI’s DRV8874 motor driver offers a wide operating voltage range of 4.5 V to 37 and can deliver a continuous 2.1 A (6 A peak) to a single bidirectional brushed DC motor. The DRV887...
Delivered by Fri 12 Jun
Adafruit PiCowbell Camera Breakout - Autofocus 72 Degree Lens
SKU: AF-5945 | Brand: Adafruit
The Adafruit PiCowbell OV5640 Camera Breakout with Autofocus (72°) adds a 5-megapixel camera with a standard 72-degree non-distorting lens and autofocus motor to your Raspberry Pi Pico or Pico W. The narrower field of...
Delivered by Fri 12 Jun
IO Expansion Hat for Raspberry Pi 3/4/400
SKU: DF-DFR0828 | Brand: DFRobot
When making Raspberry Pi projects or learning to use Raspberry Pi for python programming, we may often need to check its Pinout Table to find out the BCM and WiringPi code corresponding to the related GPIOs, which is ...
Delivered by Fri 12 Jun
EasyESP-1: An ESP8266 experimenter board for beginners
SKU: EC-CDE82664E | Brand: Elecrow
The EasyESP-1 is a beginner-friendly development board for the ESP8266 Wi-Fi microcontroller, based on the ESP-12E module. It includes an onboard USB-to-serial converter (CP2102) so you can program and debug directly ...
Delivered by Fri 12 Jun
Pololu Basic 2-Channel SPDT Relay Carrier with 5VDC Relays (Assembled)
SKU: PL-2485 | Brand: Pololu
The Pololu Basic 2-Channel SPDT Relay Carrier provides simple, independent control of two single-pole, double-throw (SPDT) relay switches from low-voltage, low-current control signals. This assembled version comes rea...
Delivered by Fri 12 Jun
SparkFun Multiplexer Breakout - 8 Channel (74HC4051)
SKU: SF-BOB-13906 | Brand: SparkFun
The SparkFun Multiplexer Breakout provides access to all pins and features of the 74HC4051, an 8-channel analog multiplexer/demultiplexer. The 74HC4051 allows you to turn four I/O pins into eight multifunctional, indi...
Delivered by Fri 12 Jun
SparkFun ESP8266 Thing
SKU: SF-WRL-13231 | Brand: SparkFun
The SparkFun ESP8266 Thing is a breakout and development board for the ESP8266 WiFi SoC — a popular platform for IoT and WiFi-connected projects. All module pins are broken out to breadboard-compatible rows, and on-bo...
Delivered by Fri 12 Jun
SparkFun RJ45 MagJack Breakout
SKU: SF-BOB-13021 | Brand: SparkFun
This is the SparkFun RJ45 MagJack Breakout, a simple board that will provide you with a way to put an ethernet port into your breadboard. The SparkFun RJ45 MagJack Breakout is the same one found in our very own mbe...
Delivered by Fri 12 Jun
Gravity: Arduino Digital Water Flow Sensor - 1/8
SKU: DF-SEN0216 | Brand: DFRobot
The Water Flow sensor measures the rate of a liquid flowing through it. The YF-S401 water flow sensor consists of a plastic valve body, flow rotor and hall effect sensor. It is usually used at the inlet end to det...
Delivered by Fri 12 Jun
ESP32 S3 Al Chatbot DIY Starter Kit for Deepseek
SKU: KS-KS5027 | Brand: Keyestudio
Build your own AI chatbot on a breadboard with this DIY starter kit based on the ESP32-S3. Featuring a MEMS microphone for voice input, a digital amplifier with speaker for audio output, and a 1.54" display, the kit p...
Delivered by Fri 12 Jun
Maqueen Plus V3 - STEM Educational micro:bit Robot with Matrix Laser Ranging (18650 Battery)
SKU: DF-MBT0050-18650 | Brand: DFRobot
The Maqueen Plus V3 is an advanced STEM educational robot platform designed for primary and secondary school students. Powered by a BBC micro:bit (not included), it combines a matrix laser ranging sensor, high-precisi...
Delivered by Fri 12 Jun
Adafruit Proto Tripler PiCowbell for Pico and PicoW
SKU: AF-5967 | Brand: Adafruit
The Adafruit Proto Tripler PiCowbell gives your Raspberry Pi Pico or Pico W three side-by-side socket slots — plug in your Pico and up to two PiCowbell accessories with no soldering or stacking headers required. It al...
Delivered by Fri 12 Jun
Adafruit Terminal PiCowbell for Pico with Pre-Soldered Sockets
SKU: AF-5907 | Brand: Adafruit
The Adafruit Terminal PiCowbell with Pre-Soldered Sockets gives your Raspberry Pi Pico or Pico W instant plug-and-play access to every GPIO pin via screw terminal blocks. Simply plug in your Pico and connect 18–26 AWG...
Delivered by Fri 12 Jun
Romeo ESP32-S3 Development Board for Robotics FPV RC Car
SKU: DF-DFR0994 | Brand: DFRobot
Romeo ESP32-S3 is a high-performance development board specifically designed forrobotics projects. It utilizes the ESP32-S3 microcontroller and is equipped with an onboard camera that enables video transmission and...
Delivered by Fri 12 Jun
Cockatoo - Micro:bit simple screw-terminal breakout
SKU: LB-COCKATOO | Brand: Little Bird
The Cockatoo is a simple screw-terminal breakout board for the BBC micro:bit. Slide your micro:bit into the edge connector and you get secure screw terminal access to pins 0, 1, 2, 3.3V, and GND — no soldering or croc...
Delivered by Fri 12 Jun
Kitronik Air Quality Datalogging Board for Pico
SKU: KI-5336 | Brand: Kitronik
The Kitronik Smart Air Quality Board provides a complete air monitoring and datalogging solution for the Raspberry Pi Pico. With an onboard BME688 environmental sensor, OLED display, real-time clock support, and Micro...
Delivered by Fri 12 Jun
ESP32-S2 MCU WiFi Development Board, 240MHz, 2.4 GHz WiFi, with LCD / Pinheader
SKU: WS-21179 | Brand: Waveshare
A compact WiFi development board based on the ESP32-S2 single-core Xtensa LX7 processor, running at up to 240MHz with 2.4GHz WiFi connectivity. Available in multiple variants — with or without an onboard 0.96" IPS LCD...
Delivered by Fri 12 Jun
4 Channels IR Reflective Sensor
SKU: EC-SPS40201S | Brand: Elecrow
This Elecrow 4-channel IR reflective sensor module combines four infrared emitter/receiver pairs with a mainboard that processes all signals. When an object enters the detection range, the corresponding channel output...
Delivered by Fri 12 Jun
Compare your options
All buying guides
The Teacher's Guide to micro:bit Robots: Kits, Buggies, and Robotics Compared
Compare micro:bit-compatible robot kits, buggies, and robotics platforms by age range, assembly difficulty, sensors, and curriculum fit — for classrooms, clubs, and home learners across Australia.
49 products compared
The Maker's Guide to Servos: Torque, Speed, and Control Compared
Compare hobby and industrial servos by torque, rotation range, and control type (PWM, digital, continuous) to pick the right motor for robotics, animatronics, and RC projects.
16 products compared
Title The Maker's Guide to ADCs: Resolution, Speed, and Interface Compared
Compare analogue-to-digital converters by bit depth, sample rate, and bus (I²C vs SPI) to pick the right chip for your Arduino, Raspberry Pi, or microcontroller project.
16 products compared
