All Products

SKU: DF-TEL0137 | Brand: DFRobot

This GPS receiver brings much more accurate and faster positioning performance with stronger signal compared with traditional GPS receivers. It is compact, lightweight and portable. Integrated with built-in receivin...

SKU: LB-LR0007 | Brand: Little Bird

Flame Detection Sensor Module for use with Arduino Sensor for flame wavelengths between 760 nm to 1100 nm infrared is most sensitive60 degree detection sensor   Two outputs mode: AO: analog output, real-time ou...

SKU: LB-LS0221 | Brand: Little Bird

The CJMCU-226 INA226 is a powerful voltage, current, and power monitoring module designed for high precision in both high-side and low-side sensing applications. With its bi-directional current sensing capability and ...

SKU: DF-SEN0308 | Brand: DFRobot

The Gravity Analogue Waterproof Capacitive Soil Moisture Sensor from DFRobot measures soil moisture using capacitive sensing rather than resistive probes, offering significantly better corrosion resistance and longer ...

SKU: WS-19979 | Brand: Waveshare

The 2-Channel RS232 Module for Raspberry Pi Pico converts UART signals to RS232 and vice versa using the SP3232EEN transceiver. It plugs directly onto the Pico via the onboard female pin header — no wiring required. ...

SKU: DF-SEN0189 | Brand: DFRobot

The Gravity Analog Turbidity Sensor measures water clarity by detecting the level of suspended particles. It works by measuring light transmittance and scattering rate, which change with the amount of total suspended ...

SKU: DF-DFR0095 | Brand: DFRobot

An infrared transmitter is simply a Light Emitting Diode which generates IR light (invisible IR light)--light with a wavelength of between 1 mm and 750 nanometers, and some associated circuitry. In an infrared ...

SKU: SF-SEN-15901 | Brand: SparkFun

This Weather Meter Kit provides the three core sensors for a DIY weather station: an anemometer (wind speed), a wind vane (wind direction), and a rain gauge. All three sensors use passive magnetic reed switches rather...

SKU: AF-1766 | Brand: Adafruit

The "poor man's" accelerometer/motion sensor! These spring-vibration switches are high sensitivity non-directional vibration induced trigger switches. Inside is a very soft spring coiled around a long metal pin....

SKU: WS-24370 | Brand: Waveshare

The LC76G is a multi-GNSS positioning module that supports GPS, BeiDou (BDS), GLONASS, Galileo, and QZSS satellite systems. It allows multi-system combined or single-system independent positioning for fast, accurate l...

SKU: DF-SEN0257 | Brand: DFRobot

The Gravity Analog Water Pressure Sensor measures water or gas pressure and outputs a linear 0.5–4.5 V analogue signal proportional to the applied pressure (0–1.6 MPa). Using the DFRobot Gravity 3-pin interface, it co...

SKU: LB-24-ATMOS | Brand: Little Bird

A compact barometric pressure and temperature sensor module that communicates over I2C. Ideal for weather stations, altitude estimation, and environmental monitoring projects with micro:bit, Arduino, or other microcon...

SKU: DF-SEN0171 | Brand: DFRobot

A passive infrared (PIR) motion sensor from DFRobot's Gravity series. It detects infrared radiation from people and animals in motion and outputs a digital HIGH signal when movement is detected — ideal for security sy...

SKU: DF-TEL0094 | Brand: DFRobot

You must have used a GPS receiver. It is easy to be found in most places, such as smartphones, cars, and computers. They are used to track your loaction all over the globe. GPS Receiver for Arduino is a unit embed...

SKU: DF-SEN0311 | Brand: DFRobot

A commercial-grade waterproof ultrasonic distance sensor with UART serial output. The A02YYUW features a much smaller blind zone (3 cm) and wider sensing angle than many comparable sensors, plus penetration through sm...

SKU: DF-DFR0094 | Brand: DFRobot

Infrared devices are widely used, and often for remote controlled devices. With this IR receiver, your Arduino project is now able to receive command from any IR remote controller. Well, it will be also easy...

SKU: DF-DFR0129 | Brand: DFRobot

A capacitive touch sensor kit for Arduino based on the MPR121 touch controller. Includes three interchangeable touch pads — a scroll wheel, a keypad with backlight support, and a grid pad for gesture and pattern recog...

SKU: AF-189 | Brand: Adafruit

PIR sensors are used to detect motion from pets/humanoids from about 20 feet away (possibly works on zombies, not guaranteed). This one has an adjustable delay before firing (approx 2-4 seconds), adjustable sensiti...

SKU: SF-COM-09117 | Brand: SparkFun

This is a 12-step rotary encoder with a nice ‘clicking’ feel. It’s breadboard friendly, and has a pretty handy select switch (by pushing in on the knob). The encoder is different from a potentiometer in that an enc...

SKU: AF-5990 | Brand: Adafruit

The Adafruit Infrared IR Remote Transceiver combines a high-powered IR transmitter and a sensitive 38 kHz IR receiver on a single board. With two 940 nm IR LEDs (one vertical, one horizontal) driven by an onboard N-ch...