All Products

SKU: EF-EF04093 | Brand: ElecFreaks

Octopus Analog UV sensor (GUVA-S12SD) is the UV electric brick in our Octopus series, the basic design is from the Octopus electric bricks and the setting of its outlook, the PCB fixing hole and the connectors are the...

SKU: AF-3886 | Brand: Adafruit

The Adafruit MPU-6050 breakout combines a 3-axis accelerometer and 3-axis gyroscope in a single compact sensor, providing 6 degrees of freedom (6-DoF) motion sensing over I2C. A proven and popular IMU, the MPU-6050 is...

SKU: LB-LS1673 | Brand: Little Bird

This Potentiometer Module is from our Micro:bit 24 bit kit. You're probably already familiar with using a potentiometer as they are commonly found on many electrical devices, such as in audio equipment where they a...

SKU: EF-EF04027 | Brand: ElecFreaks

Octopus Soil Moisture Sensor Brick can read the amount of moisture present in the soil surrounding it. It's a low tech sensor, but ideal for monitoring an urban garden, or your pet plant's water level. This is a mu...

SKU: AF-3966 | Brand: Adafruit

The BMP388 from Bosch is a high-precision barometric pressure and temperature sensor, offering significantly improved altitude accuracy over the BMP280. With altitude noise as low as 0.1 metres and a relative accuracy...

SKU: DF-SEN0032 | Brand: DFRobot

Breakout board for the Analog Device ADXL345. The ADXL345 is a small, thin, low power, 3-axis accelerometer with high resolution (13-bit) measurement at up to ±16 g. Digital output data is formatted as 16-bit twos ...

SKU: DF-SEN0129 | Brand: DFRobot

INTRODUCTION This is an Arduino CH4 gas sensor. It uses MQ4 probe which is able to detect nature gas, CH4. It is less sensitivity in detecting alcohol, cooking fumes, and cigarette smok...

SKU: DF-SEN0017 | Brand: DFRobot

This is a line tracking (following) sensor to guide your robot by telling white from black quickly and accurately. It is commonly used in arduino robot project, and probably is the best line following sens...

SKU: SF-ROB-09453 | Brand: SparkFun

This version of the QRE1113 breakout board features an easy-to-use analog output, which will vary depending on the amount of IR light reflected back to the sensor. This tiny board is perfect for line sensing applic...

SKU: DF-DFR0076 | Brand: DFRobot

This Gravity analog flame sensor detects fire and infrared light sources in the 760–1,100 nm wavelength range. With a 60° detection angle and analogue output proportional to flame distance, it's widely used in firefig...

SKU: DF-DFR1202 | Brand: DFRobot

A high-efficiency DC-DC step-down (buck) converter that accepts 6–24 V input and delivers a stable 5 V output at up to 16 A. With over 90% conversion efficiency at typical loads and output ripple below 20 mV, it provi...

SKU: WS-3678 | Brand: Waveshare

The 8 Push Buttons Module is a compact breakout board featuring 8 individual push buttons, providing a simple way to add multiple digital inputs to your microcontroller or development board. It's ideal for prototyping...

SKU: DF-SEN0564 | Brand: DFRobot

The Fermion MEMS Carbon Monoxide Sensor uses micro-electromechanical system (MEMS) technology to detect CO gas concentrations from 5 to 5,000 ppm. Its compact size, low power consumption, short preheat time, and fast ...

SKU: AF-5764 | Brand: Adafruit

The Adafruit TRRS Jack Breakout Board provides easy access to all four contacts of a 3.5mm TRRS (Tip-Ring-Ring-Sleeve) audio jack — commonly used for stereo audio plus a microphone channel, as found on mobile phone he...

SKU: AF-5425 | Brand: Adafruit

The Adafruit VL53L4CX is the longest-range Time-of-Flight (ToF) distance sensor in ST's VL5 series, measuring from approximately 1 mm up to 6000 mm (6 metres). It uses an invisible laser to precisely time how long lig...

SKU: AF-4870 | Brand: Adafruit

The Adafruit Neo Trinkey is a tiny USB-A development board featuring an ATSAMD21 microcontroller and four RGB NeoPixel LEDs. Just plug it into any USB-A port on a computer or laptop and you've got a programmable, colo...

SKU: AF-4920 | Brand: Adafruit

This little buck converter based on the TPS62827 is super handy, taking up to 5.5V input and providing a 3.3V output with up to 2A current. It's great for supplying power to hungry 3.3V voltage circuits from a range o...

SKU: AF-4701 | Brand: Adafruit

The Adafruit ST25DV16K is a unique I2C-programmable RFID EEPROM breakout that works with mobile phones as an ISO/IEC 15693 (13.56 MHz) NFC tag, but can be dynamically rewritten over I2C by a microcontroller. This make...

SKU: LB-24-REED | Brand: Little Bird

A reed switch is an electrical switch which is operated when a magnetic field is brought near to it.  Check out our tutorial here Digital Output (DO)GND: In electronics, we define a point in a circuit to be a ki...

SKU: AF-3965 | Brand: Adafruit

The Adafruit MPRLS Ported Pressure Sensor Breakout measures absolute air pressure from 0 to 25 PSI (0–172 kPa) via a stainless steel port. Unlike typical barometric sensors, the metal port lets you attach tubing to me...