All Products
Browse the full range of electronics, components, and maker supplies available at Little Bird Electronics. From microcontrollers and sensors to connectors, tools, and development boards — everything you need for your next project is right here.
Whether you're a hobbyist, educator, student, or professional engineer, our catalogue covers robotics, IoT, STEM kits, 3D printing accessories, and thousands of electronic components with fast shipping across Australia.
Touch screen breakout board (0.5mm FPC)
SKU: AF-334 | Brand: Adafruit
If you've got a resistive touch screen that you'd like to use, you'll need this breakout! It has a fine pitch (0.5mm) connector soldered onto it and it's broken out into the 4 resistive wires of the panel. A petite...
Delivered by Wed 5 Aug
SparkFun Thermocouple Breakout - MAX31855K
SKU: SF-SEN-13266 | Brand: SparkFun
The SparkFun MAX31855K Thermocouple Breakout is a simple 14-bit resolution, SPI-compatible, serial interface thermocouple digitizer that makes reading a wide range of temperatures possible. A thermocouple works by ...
Delivered by Wed 5 Aug
SparkFun Altitude/Pressure Sensor Breakout - MPL3115A2
SKU: SF-SEN-11084 | Brand: SparkFun
Life has its ups and downs, so why not measure them? The MPL3115A2 is a MEMS pressure sensor that provides Altitude data to within 30cm (with oversampling enabled). The sensor outputs are digitized by a high reso...
Delivered by Wed 5 Aug
DS18B20 Digital temperature sensor + extras
SKU: AF-374 | Brand: Adafruit
These 1-wire digital temperature sensors are fairly precise (±0.5°C over much of the range) and can give up to 12 bits of precision from the onboard digital-to-analog converter. They work great with any microcontro...
Delivered by Wed 5 Aug
SparkFun RFID Reader Breakout
SKU: SF-SEN-13030 | Brand: SparkFun
The SparkFun RFID Reader Breakout converts the 2mm pin spacing of ID-series RFID readers to breadboard-friendly 0.1" headers. Compatible with the ID-3LA, ID-12LA, and ID-20LA readers, this board lets you solder the re...
Delivered by Wed 5 Aug
Gravity: Laser PM2.5 Air Quality Sensor For Arduino
SKU: DF-SEN0177 | Brand: DFRobot
The Gravity Laser PM2.5 Air Quality Sensor uses laser scattering to measure suspended particulate matter concentrations in the air. It detects particles from 0.3 to 10 µm in diameter and outputs digital concentration ...
Delivered by Wed 5 Aug
Adafruit SPI Non-Volatile FRAM Breakout - 64Kbit / 8KByte
SKU: AF-1897 | Brand: Adafruit
The Adafruit SPI Non-Volatile FRAM Breakout provides 64 Kbit (8 KBytes) of ferroelectric RAM (FRAM) storage over SPI. FRAM combines the non-volatile retention of flash with the instant read/write speed of SRAM — no pa...
Delivered by Wed 5 Aug
WT8266-S1 WiFi Module Based on ESP8266
SKU: DF-TEL0109 | Brand: DFRobot
WT8266-S1 Wi-Fi module is a low consumption, high performance embedded Wi-Fi network control module designed by Wireless-Tag. It can meet the IoT application requirements in smart power grids, building aut...
Delivered by Wed 5 Aug
SparkFun Line Sensor Breakout - QRE1113 (Digital)
SKU: SF-ROB-09454 | Brand: SparkFun
The SparkFun QRE1113 Line Sensor Breakout (Digital) is a compact IR reflectance sensor board that outputs a digital signal based on surface reflectivity. It uses a capacitor discharge circuit — the faster the 10 nF ca...
Delivered by Wed 5 Aug
LPG Gas Sensor - MQ-6
SKU: SF-SEN-09405 | Brand: SparkFun
A simple-to-use MQ-6 gas sensor for detecting liquefied petroleum gas (LPG) — primarily propane and butane — in the air. The sensor detects concentrations from 200 to 10,000 ppm with high sensitivity and fast response...
Delivered by Wed 5 Aug
LPS331AP Pressure/Altitude Sensor Carrier with Voltage Regulator
SKU: PL-2126 | Brand: Pololu
A breakout board for ST's LPS331AP digital barometric pressure sensor. This sensor measures absolute pressure from 260 to 1260 mbar with excellent accuracy (±2 mbar), making it ideal for altitude estimation, weather m...
Delivered by Wed 5 Aug
8*8 dot matrix module
SKU: LB-LR0122 | Brand: Little Bird
This module consists of 64 LEDs with MAX7219 driver chip. It can control 64 LEDs by 16-bit data serial input and output. If you want to control it, you only need to control three IO ports. It support for cascading mul...
Delivered by Wed 5 Aug
ESP32-C6 MINI Module - 4MB (PCB Antenna)
SKU: SF-WRL-24807 | Brand: SparkFun
The ESP32-C6 MINI is Espressif's compact WiFi 6 module integrating 2.4GHz Wi-Fi 6 (802.11ax), Bluetooth 5.3 (LE), and IEEE 802.15.4 (Thread/Zigbee) into a single package with an on-board PCB antenna. Built around a hi...
Delivered by Wed 5 Aug
Motoron M1U256 Single Serial Motor Controller
SKU: PL-5063 | Brand: Pololu
The Motoron M1U256 Single I²C Motor Controller offers a compact solution for controlling two DC motors using a UART serial interface. Multiple Motoron controllers can be connected to the same serial bus, making it eas...
Delivered by Wed 5 Aug
Fermion: GR10-30 Gesture Sensor (Breakout, UART & I2C, 12 Gestures, 0~30cm)
SKU: DF-SEN0543 | Brand: DFRobot
This GR10-30 gesture sensor is capable of recognizing 12 hand gestures: move up, down, left, right, forward & backward, rotate clockwise & counterclockwise, rotate clockwise & counterclockwise continuously, hover, and...
Delivered by Wed 5 Aug
Adafruit ICM-20649 Wide Range ±30g ±4000dps 6-DoF IMU
SKU: AF-4464 | Brand: Adafruit
The Adafruit ICM-20649 breakout features a wide-range 6-DoF IMU capable of measuring up to ±30g acceleration and ±4000°/s gyroscope rotation — roughly double the range of standard IMUs. When typical ±16g accelerometer...
Delivered by Wed 5 Aug
SparkFun MicroMod ESP32 Processor
SKU: SF-WRL-16781 | Brand: SparkFun
The SparkFun MicroMod ESP32 Processor Board brings Espressif's ESP32 into the MicroMod ecosystem via the M.2 connector interface. It provides WiFi and Bluetooth connectivity with the processing power of a dual-core Te...
Delivered by Wed 5 Aug
Adafruit H3LIS331 Ultra High Range Triple-Axis Accelerometer - STEMMA QT / Qwiic
SKU: AF-4627 | Brand: Adafruit
The Adafruit H3LIS331 is an ultra-high-range triple-axis accelerometer capable of measuring up to ±400g across all three axes. Part of the ST LIS331 family, it's designed for applications where standard ±16g accelerom...
Delivered by Wed 5 Aug
SparkFun GPS Breakout - NEO-M9N, Chip Antenna (Qwiic)
SKU: SF-GPS-15733 | Brand: SparkFun
The SparkFun NEO-M9N GPS Breakout with on-board chip antenna is a high quality, GPS board with equally impressive configuration options. The NEO-M9N module is a 92-channel u-blox M9 engine GNSS receiver, meaning it ca...
Delivered by Wed 5 Aug
M5StickC Yun Hat(SH20,BMP280,SK6812)
SKU: M5-U070 | Brand: Little Bird
The M5StickC Yun HAT is a cloud-shaped multi-sensor environmental monitoring accessory designed to mount on the M5StickC via the top socket. It integrates a temperature and humidity sensor (SHT20), barometric pressure...
Delivered by Wed 5 Aug
Compare your options
All buying guides
The Teacher's Guide to micro:bit Robots: Kits, Buggies, and Robotics Compared
Compare micro:bit-compatible robot kits, buggies, and robotics platforms by age range, assembly difficulty, sensors, and curriculum fit — for classrooms, clubs, and home learners across Australia.
49 products compared
The Maker's Guide to Servos: Torque, Speed, and Control Compared
Compare hobby and industrial servos by torque, rotation range, and control type (PWM, digital, continuous) to pick the right motor for robotics, animatronics, and RC projects.
16 products compared
Title The Maker's Guide to ADCs: Resolution, Speed, and Interface Compared
Compare analogue-to-digital converters by bit depth, sample rate, and bus (I²C vs SPI) to pick the right chip for your Arduino, Raspberry Pi, or microcontroller project.
16 products compared