Addressable LEDs

SKU: AF-1559 | Brand: Adafruit

So, you want lots and lots of NeoPixels? And you want them for less? Not a problem! Here's a sheet of Flora NeoPixels fresh from the (reflow) oven. Cut them off as you need 'em and save a pretty penny while you're ...

SKU: AF-1547 | Brand: Adafruit

A strand of 20 digitally-controllable RGB LED pixel dots, each containing three 5050 RGB LEDs and a WS2801 controller chip. The pixels are encased in translucent white 30mm domes for weatherproof operation and even 18...

SKU: AF-4979 | Brand: Adafruit

The NeoKey FeatherWing adds two mechanical key switch sockets with individually addressable NeoPixel backlighting to any Feather-format microcontroller. Each socket accepts Cherry MX or compatible switches (Kailh, Gat...

SKU: SF-COM-14608 | Brand: SparkFun

This version of the APA102 (or “DotStar”) is an astoundingly tiny, 2020-sized (2x2mm) SMD LED. With an integrated control circuit embedded, the APA102-2020 is incredibly bright and colorful. If you look really clos...

SKU: AF-1612 | Brand: Adafruit

The NeoPixel Mini PCBs are among the smallest addressable RGB LED breakouts available. Each tiny board measures just 8 × 10 mm and features two sets of three solder pads on the back for easy wiring. The pixels are cha...

SKU: AF-1655 | Brand: Adafruit

Individual WS2812B-compatible 5050 RGB LEDs with an integrated driver chip — the same LED used in NeoPixel strips and pixels. Each 5 × 5 mm package contains an RGB LED and controller with ~18 mA constant-current drive...

SKU: AF-1586 | Brand: Adafruit

Round and round they go! 24 ultra-bright smart RGB NeoPixels are arranged in a circle with a 66 mm (2.6″) outer diameter — the largest in the NeoPixel Ring family. Each LED is individually addressable from a single mi...

SKU: AF-1312 | Brand: Adafruit

This is the easiest way possible to add small, bright RGB pixels to your project. We took the same technology from our Flora NeoPixels and made them breadboard friendly, with two rows of 3 x 0.1" spaced header on e...

SKU: SF-BOB-13282 | Brand: SparkFun

This is a breakout board for the WS2812B RGB LED. The WS2812B is actually an RGB LED with a WS2811 built right into the LED! All the necessary pins are broken out to 0.1" spaced headers for easy bread-boarding. Severa...

SKU: AF-3195 | Brand: Adafruit

Snap the Pimironi Blinkt! on top of a Raspberry Pi Zero, or any Raspberry Pi with a 2x20 connector, for a fun 1x8 RGB LED matrix powered directly from the Pi.  The Blinkt! provides a wash or controllable ...

SKU: SF-BOB-29762 | Brand: SparkFun

  The WS2812 (often referred to as a "NeoPixel") has become the standard for addressable LED projects. This RGB LED Breakout board, now with pre-soldered right-angle headers, is the absolute easiest way to st...

SKU: AF-5943 | Brand: Adafruit

Pixelblaze is a Wi-Fi Addressable LED Controller and Custom Pattern Editor, powered by an ESP32 module with 240Mhz dual-core processor for 'blazingly fast' pixel rendering capabilities.This is the Pixelblaze V3 Pico w...

SKU: AF-4892 | Brand: Adafruit

These incredibly small and slim surface-mount NeoPixel LEDs are an easy way to add a lot of very tiny (but bright!) colorful baguette diamond LEDs to your project. They are just 3.2mm x 1.0mm x 1.48mm and ca...

SKU: AF-4492 | Brand: Adafruit

Make your own smart LED arrangement with the same integrated LED that is used in our NeoPixel strip and pixels. This tiny 1515 (1.5mm x 1.5mm) RGB LED is designed to be surface-mount soldered and is the most compact w...

SKU: AF-4352 | Brand: Adafruit

Build a handheld light-up button controller with this complete kit that pairs the Adafruit 4×4 NeoTrellis RGB Driver with a Feather M4 Express inside an elegant laser-cut acrylic enclosure. The 16 silicone buttons eac...

SKU: SF-COM-14967 | Brand: SparkFun

This is the one inch version of the SparkFun LuMini LED Ring, packed with 20 individually addressable LEDs, each capable of producing 16 million colors, it provides you with a lot of color for just about any reason...

SKU: KI-2762 | Brand: Kitronik

Add an individually addressable full colour LED to your E-Textiles projects with the Kitronik Sewable ZIP LED. This new addition to our Electro Fashion range incorporates a full colour addressable ZIP LED, which ca...

SKU: AF-1558 | Brand: Adafruit

So, you want lots and lots of NeoPixels? And you want them for less? Not a problem! Here's a sheet of Breadboard-Friendly NeoPixel breakouts fresh from the (reflow) oven. Snap them off as you need 'em and save a pr...

SKU: AF-1548 | Brand: Adafruit

Digitally-controllable RGB LED pixel bars using WS2801 driver chips. Each 75mm plastic PVC bar contains 3× 5050 RGB LEDs and a controller chip, epoxy-flooded for waterproof outdoor use. Sold as a strand of 21 pixels —...

SKU: AF-3630 | Brand: Adafruit

Stranded NeoPixel dots are perfect for adding individual points of colour to costumes, wearables, and decorations without the rigidity of a PCB strip. Each strand contains 20 individually addressable NeoPixel LEDs enc...