Adafruit

SKU: AF-6096 | Brand: Adafruit

A lightning bolt-shaped COB (Chip-on-Board) LED filament that produces a warm, uniform glow similar to classic Edison-style LED bulbs. Dozens of micro LED diodes are bonded to a rigid metal backing and coated in silic...

SKU: AF-6095 | Brand: Adafruit

This skull-shaped LED filament uses COB (Chip-on-Board) technology — dozens of micro LED diodes bonded to a rigid metal backing and coated in silicone — to produce a warm, uniform glow similar to Edison-style LED bulb...

SKU: AF-6093 | Brand: Adafruit

A decorative COB (Chip-on-Board) LED shaped like a snowflake, using the same technology found in Edison-style LED bulbs. Dozens of micro LED diodes are bonded onto a rigid metal backing and coated in silicone, produci...

SKU: AF-6092 | Brand: Adafruit

The Adafruit bq25185 is an all-in-one charging and power supply board that supports USB, DC, and solar charging with an integrated 3.3V buck converter. It is an excellent upgrade from MCP73833 or MCP73831-based charge...

SKU: AF-6077 | Brand: Adafruit

If you’re looking to add a USB-C connector to your wearable tech project, check out our sewable connectors! This USB Type-C connector is mounted horizontally on a flexible, sewable base, with red and black power wires...

SKU: AF-6076 | Brand: Adafruit

If you want to add a Micro-B connector to your favorite garment for a wearable tech project, check out our sewable connectors! This Micro-B connector is mounted horizontally on a flexible, sewable base, with red and b...

SKU: AF-6073 | Brand: Adafruit

This snap-in panel mount USB cable is perfect for adding a USB host connection to your project enclosure. On one end, it features a compact USB Type-A connector designed for easy snap-in panel mounting—no screws or dr...

SKU: AF-6072 | Brand: Adafruit

A snap-in panel mount cable with a USB Type A socket on one end and bare power wires on the other. Perfect for adding a USB-A charging or power port to project enclosures without screws or drilling — just cut a rectan...

SKU: AF-6067 | Brand: Adafruit

The Adafruit LPS28 Pressure Sensor Breakout features the ST LPS28DFW — a barometric pressure sensor with an extended range up to 4060 hPa, far beyond the ~1260 hPa limit of most competing sensors. This makes it suitab...

SKU: AF-6054 | Brand: Adafruit

The Feather Mount for LEGO-Compatible Brick Systems lets you securely attach any standard-sized Feather or FeatherWing board (2" × 0.9" / 51 mm × 23 mm) to LEGO-compatible brick plates. No hot glue, epoxy, or tape nee...

SKU: AF-6062 | Brand: Adafruit

The Adafruit INA3221 breakout monitors current, voltage, and power on up to three independent power rails simultaneously over I2C. Each channel supports high or low-side measurement up to +26V DC at ±3.2A with ±1% pre...

SKU: AF-6004 | Brand: Adafruit

This panel-mount USB extension cable runs a USB Type-A port through an enclosure wall. The socket end has two flexible mounting ears with pre-installed M3 screws for securing to a panel, while the plug end connects to...

SKU: AF-6022 | Brand: Adafruit

DescriptionPerfect for building your custom keyboard, these "Half Height" Low Profile MX key switches are compatible with standard MX layouts and solder-free sockets, offering a significantly slimmer design. While st...

SKU: AF-6027 | Brand: Adafruit

The Adafruit DS2482S-800 is an 8-channel I2C-to-1-Wire bus adapter on a STEMMA QT breakout board. It allows any I2C-capable microcontroller or single-board computer to communicate with 1-Wire devices — most commonly D...

SKU: AF-6019 | Brand: Adafruit

DescriptionThis accessory simplifies wiring sensors to your Bus Pirate 5, featuring snap-open quick connects that easily plug into the BP5’s header port. When you’re ready to dive into a project, these quick connecto...

SKU: AF-6021 | Brand: Adafruit

The Bus Pirate 5 SOIC/SOP8 SPI Flash Adapter makes it easy to program bare SPI flash memory chips without clips or soldering. The spring-loaded ZIF socket accepts SOP8 packages in both 150 mil and 208 mil widths — the...

SKU: AF-6015 | Brand: Adafruit

Here is a cute and minimal enclosure for your TRRS Trinkey to keep it safe during use and transport. This case has been custom-designed and 3D printed to accommodate the reset button and STEMMA QT connector. No screws...

SKU: AF-6003 | Brand: Adafruit

The Adafruit Metro RP2350 brings the next-generation Raspberry Pi RP2350 dual-core processor to the standard Metro/UNO shield-compatible form factor. With dual ARM Cortex-M33 cores running at 150 MHz, 528 KB SRAM, 16 ...

SKU: AF-6002 | Brand: Adafruit

Here is a cute and minimal enclosure for your QT Py to keep it safe during use and transport. This case has been custom-designed and 3D printed to accommodate the USB-C connector. No screws or glue are required; simpl...

SKU: AF-5999 | Brand: Adafruit

The Adafruit CH334F Mini 2-Port USB Hub Breakout converts one USB host port into two downstream ports using the CH334F USB 2.1 hub chip. Designed to be compact and embeddable, it fits inside enclosures or existing dev...