Adafruit

SKU: AF-2928 | Brand: Adafruit

The 8-Channel PWM or Servo FeatherWing adds 8 channels of 12-bit PWM output to any Adafruit Feather board via I2C. It uses an onboard PWM driver with a built-in clock, so it runs independently without tying up your mi...

SKU: AF-2915 | Brand: Adafruit

A 3.5 mm (1/8") 4-pole TRRS audio jack with screw terminal connections — no soldering required. Use stranded or solid-core wire and a small screwdriver to create custom audio wiring jigs, breakouts, and test setups. ...

SKU: AF-3028 | Brand: Adafruit

A Feather board without ambition is a Feather board without FeatherWings! This is the DS3231 Precision RTC FeatherWing: it adds an extremely accurate I2C-integrated Real Time Clock (RTC) with a Temperature Compensa...

SKU: AF-2946 | Brand: Adafruit

The Adafruit IS31FL3731 breakout is a charlieplexed PWM LED matrix driver that controls a 16×9 grid of individually dimmable LEDs over I2C. Each of the 144 LEDs can be set to any brightness level with 8-bit (256-level...

SKU: AF-3008 | Brand: Adafruit

Short female headers designed for tight spaces where standard-height headers won't fit. At just 5mm tall (compared to the standard 8mm), these low-profile headers are ideal for compact builds and slim assemblies. Eac...

SKU: AF-166 | Brand: Adafruit

The Interlink 402 is a round force-sensitive resistor (FSR) with a 12.7 mm (0.5″) sensing area. It changes resistance based on applied pressure — the harder you press, the lower the resistance — making it a simple, lo...

SKU: AF-3133 | Brand: Adafruit

The Adafruit Ultimate GPS FeatherWing brings precise, low-power GPS to the Feather ecosystem. Built around the MTK3339 chipset, it tracks up to 22 satellites on 66 channels with -165 dBm sensitivity and delivers up to...

SKU: AF-3083 | Brand: Adafruit

A compact aluminium heatsink with pre-applied thermal adhesive for easy installation on the Raspberry Pi 3 and other single board computers. Simply peel off the protective film and press firmly onto the processor — no...

SKU: AF-3122 | Brand: Adafruit

Make your own custom DE-9 cable or DE-9 interface with ease, using this DE-9 Socket to Terminal Block Breakout. You get a nice solid PCB with an DE-9 socket and two strips of terminal blocks that you can use with stra...

SKU: AF-3142 | Brand: Adafruit

Our Raw Male/Male Jumper Wires are perfect for making a custom jumper wire sets for wire harnesses or jumpering between headers on PCB's. These premium jumpers are a little over 6" (150mm) long and come in a 'strip...

SKU: AF-371 | Brand: Adafruit

A 150mm (6″) IDC ribbon cable with 6-pin (2×3) socket connectors on both ends at 0.1″ × 0.1″ (2.54mm) spacing. Commonly used for AVR ISP programming connections and other 2×3 header interfaces. Key Features Socket-...

SKU: AF-3111 | Brand: Adafruit

This is a box of six 25ft spools of stranded-core wire. Stranded-core wire is best used for wiring jigs where there's bending or movement expected. It also works well with terminal blocks. It's no...

SKU: AF-3290 | Brand: Adafruit

A platinum resistance temperature detector (RTD) with a 100 Ω resistance at 0°C, offering superior accuracy and long-term stability compared to thermocouples and thermistors. PT100 sensors are widely used in laborator...

SKU: AF-3464 | Brand: Adafruit

The Adafruit Joy Bonnet turns your Raspberry Pi Zero into a handheld gaming device. This fully assembled bonnet sits on top of any Pi Zero and provides arcade-style controls — a mini joystick and buttons — that act as...

SKU: AF-735 | Brand: Adafruit

An 8-bit logic level shifter in a breadboard-friendly DIP package. The 74LVC245 converts between 3.3V and 5V logic levels, making it easy to interface modern 3.3V sensors and peripherals with 5V microcontrollers like ...

SKU: AF-760 | Brand: Adafruit

A 40-piece set of premium male-to-male jumper wires in a rainbow ribbon cable format. Each wire is 12″ (300mm) long with 0.1″ (2.54mm) male header contacts on both ends, fitting cleanly on standard-pitch headers and b...

SKU: AF-802 | Brand: Adafruit

The Adafruit 1.8" Colour TFT Shield is a plug-and-play display solution for Arduino, combining a bright 128×160 pixel TFT screen with a microSD card slot, 5-way joystick navigation switch, and three tactile buttons. T...

SKU: AF-793 | Brand: Adafruit

Handy for making wire harnesses or jumpering between headers on PCB's. These premium jumper wires are 12" (300mm) long and come in a 'strip' of 40 (4 pieces of each of ten rainbow colors). They have 0.1" female ...

SKU: AF-3399 | Brand: Adafruit

For many years, instructors and teachers have asked us to come up with a better way to teach programming and electronics. We have worked on Circuit Playground Express for over a year to come up with a board that is...

SKU: AF-828 | Brand: Adafruit

An inline flow sensor for measuring liquid or water flow in solar heating, computer cooling, irrigation, and other fluid projects. The sensor uses a pinwheel with a magnet and an external hall effect sensor to count r...