Adafruit

SKU: AF-5368 | Brand: Adafruit

A 5 V, 1.2 W solar panel from Voltaic Systems, built with ETFE (Ethylene Tetrafluoroethylene) construction for superior durability over standard PET or laminate panels. Featuring 10 high-efficiency monocrystalline Sun...

SKU: AF-5359 | Brand: Adafruit

If you love power adapters or toys & gadgets that have magnetic connections, you can now experiment with these futuristic connectors easily. It's sorta like a DIY "MagSafe-styled" connector, with five 0.1" spaced cont...

SKU: AF-5335 | Brand: Adafruit

The Adafruit CP2102N Friend is a USB-to-serial converter breakout featuring the Silicon Labs CP2102N chip with USB Type-C. It provides reliable serial communication at up to 3 Mbps, making it ideal for uploading firmw...

SKU: AF-5036 | Brand: Adafruit

The 64×32 RGB LED Matrix Panel with 2.5mm pitch packs 2048 bright RGB LEDs into a compact 160×80mm panel. With the tightest pixel spacing in the 64×32 range, this panel produces sharp, detailed images ideal for close-...

SKU: AF-5090 | Brand: Adafruit

A matching pair of 6-pin JST PH compatible cables with inline plug and socket connectors. Each cable is 20 cm long with stranded 26 AWG wires, providing a reliable and compact connection that can carry a couple of amp...

SKU: AF-5065 | Brand: Adafruit

Solenoids are basically electromagnets: they are made of a big coil of copper wire with an armature (a slug of metal) in the middle. When the coil is energized, the slug is pulled into the center of the coil. This mak...

SKU: AF-4933 | Brand: Adafruit

A 25cm flexible flat cable (FFC) with 40 pins at 0.5mm pitch and Type A-B connections (contacts on opposite sides at each end). Designed for use with 40-pin FPC-to-IDC adapter PCBs to extend Raspberry Pi GPIO connecti...

SKU: AF-4870 | Brand: Adafruit

The Adafruit Neo Trinkey is a tiny USB-A development board featuring an ATSAMD21 microcontroller and four RGB NeoPixel LEDs. Just plug it into any USB-A port on a computer or laptop and you've got a programmable, colo...

SKU: AF-4827 | Brand: Adafruit

A compact USB dongle that adds both Wi-Fi and Bluetooth 4.0 to your computer or single-board computer through a single USB port. Based on the Realtek RTL8723BU chipset, it provides 802.11bgn wireless LAN and Bluetooth...

SKU: AF-4920 | Brand: Adafruit

This little buck converter based on the TPS62827 is super handy, taking up to 5.5V input and providing a 3.3V output with up to 2A current. It's great for supplying power to hungry 3.3V voltage circuits from a range o...

SKU: AF-4779 | Brand: Adafruit

This compact battery holder connects 3× AA batteries in series, providing 3.3–4.5V output — a similar range to lithium-ion/polymer batteries. It features a built-in on/off switch and a genuine JST-PH 2-pin connector w...

SKU: AF-4650 | Brand: Adafruit

The Adafruit FeatherWing OLED 128x64 adds a crisp 1.3-inch monochrome OLED display and three tactile user buttons (A, B, C) to any Feather board. The 128×64 white OLED pixel array is self-emissive — no backlight neede...

SKU: AF-4701 | Brand: Adafruit

The Adafruit ST25DV16K is a unique I2C-programmable RFID EEPROM breakout that works with mobile phones as an ISO/IEC 15693 (13.56 MHz) NFC tag, but can be dynamically rewritten over I2C by a microcontroller. This make...

SKU: AF-4547 | Brand: Adafruit

A small submersible DC water pump for fountains, plant-watering systems, and other beginner projects. The pump draws water in from the side of the plastic casing and pushes it out through the tubing port. It runs on 3...

SKU: AF-4383 | Brand: Adafruit

The Adafruit 1.14" 240×135 Colour TFT Display Breakout with MicroSD is a compact, high-density IPS display driven by the ST7789 controller. With 240×135 pixels at 260 PPI in full 16-bit colour, it delivers sharp, vibr...

SKU: AF-4280 | Brand: Adafruit

The Adafruit DC & Stepper Motor Bonnet drives up to 4 DC motors or 2 stepper motors from your Raspberry Pi, with full PWM speed control. It uses a dedicated PWM driver chip over I2C, so only two pins (SDA/SCL) are nee...

SKU: AF-4187 | Brand: Adafruit

A triangle-shaped momentary pushbutton with a built-in LED, giving your control panels a distinctive retro sci-fi aesthetic. The LED and switch contacts are electrically independent, so you can control illumination se...

SKU: AF-4226 | Brand: Adafruit

The Adafruit INA260 is a precision DC power sensor that measures current, voltage, and power on either the high or low side of your circuit. With an integrated 2 mΩ (0.002Ω) 0.1% shunt resistor and 16-bit ADC, it hand...

SKU: AF-3483 | Brand: Adafruit

Copper tape can be an interesting addition to your toolbox. The tape itself is made of thin pure copper so it's extremely flexible and can take on nearly any shape. You can solder to it, and the tape itself can car...

SKU: AF-3853 | Brand: Adafruit

The eyes have it! Add this little lens to make a big expression with our Spooky Eyes demo for microcontrollers or Raspberry Pi. These are gorgeous glass (not plastic/acrylic!) lenses, with brilliant clarity and a n...