Adafruit

SKU: AF-1616 | Brand: Adafruit

The Adafruit Trellis is an open-source backlight keypad driver system designed to work with the Adafruit 4×4 elastomer keypad and 3mm LEDs. Each tile handles keypress detection and LED control for a 4×4 grid over I2C,...

SKU: AF-1614 | Brand: Adafruit

The Adafruit Small 1.2" 8×8 LED Matrix w/I2C Backpack in ultra-bright white combines a bright 8×8 LED matrix with a dedicated HT16K33 driver backpack, letting you add a compact display to any microcontroller project w...

SKU: AF-1644 | Brand: Adafruit

These nylon clips will let you attach our flexible NeoPixel strips to a wall, moulding, or project. Just side the rubber tubing thru so that the clips are in between two LEDs. Comes in a pack of 5.

SKU: AF-1678 | Brand: Adafruit

Yes, this is a cute little 5" TFT display with WVGA 800x480 resolution (NOT TOUCHSCREEN). We tried to get the smallest display that would be good for embedded computing usage and at a good price. The visible displa...

SKU: AF-1681 | Brand: Adafruit

The VS1053 is a multi-format audio codec chip, loved by many for its simplicity and power. CODEC stands for "Coder & Decoder" and that's pretty much what this little chip does - it can decode digital audio files su...

SKU: AF-1719 | Brand: Adafruit

Make a small linear display with multiple colors using this elegant bi-color LED bargraph. Only 1.2" long, it is quite visible but not so large it wont plug into a breadboard! 24 LEDs are contained in the plastic b...

SKU: AF-2036 | Brand: Adafruit

The 16×8 1.2" LED Matrix + Backpack combines two ultra-bright round yellow-green 8×8 LED matrices on a single, compact driver board. The classic round pixel design gives a retro dot-matrix aesthetic — ideal for scroll...

SKU: AF-1880 | Brand: Adafruit

Silicone-sheathing wire is super-flexible and soft, and its also strong! Able to handle up to 200°C and up to 600V, it will do when PVC covered wire wimps out. We like this wire for being extremely supple and flexible...

SKU: AF-2097 | Brand: Adafruit

Is this not the cutest, little display for the Raspberry Pi? It features a 3.5" display with 480x320 16-bit color pixels and a resistive touch overlay so is slightly larger than our popular original. The plate uses...

SKU: AF-1871 | Brand: Adafruit

A sewable breakout board with a CR2032 coin cell battery holder, built-in on/off switch, and 0.1" pitch breakout pins. The board provides two ground pins, one switched power pin, and one always-on power pin — giving y...

SKU: AF-1869 | Brand: Adafruit

The Quick 957D is a hot air soldering rework station with an internal pump and heater that delivers a steady stream of temperature-controlled hot air. It is designed for removing and replacing surface-mount components...

SKU: AF-2160 | Brand: Adafruit

Display, elegantly, 012345678 or 9! Gaze, hypnotized, at ABCDEFGHIJKLM - well it can display the whole alphabet. You get the point. This is a nice, bright alphanumeric display that shows letters and numbers in a be...

SKU: AF-2260 | Brand: Adafruit

A compact, panel-mountable 5" HDMI monitor with a built-in resistive touchscreen. Featuring the TI TFP401 DVI/HDMI decoder, this display works with any computer that has HDMI output — simply plug in and go. The resis...

SKU: AF-2183 | Brand: Adafruit

A set of five blank storage pages designed to hold strips of 8 mm SMT component tape — the most common tape width for surface-mount parts. Each page has 12 slots, with each slot measuring 89 mm (3.5") long, keeping yo...

SKU: AF-2301 | Brand: Adafruit

Yes, this is a 7" TFT display with 1024x600 resolution with audio-over-HDMI capability! We tried to get the best medium-size display that would be good for embedded computing usage and at a good price.  W...

SKU: AF-2300 | Brand: Adafruit

Yes, this is a 7" TFT display with 1024x600 resolution and a cute little driver board. We tried to get the best medium-size display that would be good for embedded computing usage and at a good price. And we a...

SKU: AF-2299 | Brand: Adafruit

Make a lovely video setup with a 7" screen at 1024x600 resolution. For this model, we tried to get an inexpensive 1024x600 display that was still high quality and would be good for embedded computing usage. The vis...

SKU: AF-2314 | Brand: Adafruit

The Adafruit Perma-Proto HAT for Pi Mini Kit with EEPROM is a full-sized prototyping daughter board for any Raspberry Pi with a 2×20 GPIO header. It provides a grid of 0.1″ soldering holes connected in a familiar brea...

SKU: AF-2329 | Brand: Adafruit

The Adafruit DotStar Digital LED Strip (144 LED/m, white flex PCB) delivers superior performance over traditional NeoPixels with its 2-wire SPI interface. Push data at up to 32 MHz clock speed with no critical timing ...

SKU: AF-2241 | Brand: Adafruit

Adafruit DotStar LED strips use 2-wire SPI instead of the single-wire protocol used by NeoPixels, allowing much faster data rates (up to 32 MHz) and a 20 KHz PWM refresh rate. This makes DotStars ideal for persistence...