Adafruit

SKU: AF-4406 | Brand: Adafruit

This portable, minimalist solder wire stand is so handy, we had to carry it in the shop. It comes as a solid metal frame that's not too heavy and (best of all) a solder roll holder that keeps your wire from getting...

SKU: AF-4289 | Brand: Adafruit

The ESP-32-based M5Stick-C is a wee, super portable, open-source IoT development board, like a fun-sized version of the M5Stack. Jam-packed with a Wi-Fi & Bluetooth powered ESP32, USB interface, Li-Poly...

SKU: AF-3787 | Brand: Adafruit

The Adafruit 1.54" TFT LCD is a compact, high-density display featuring a 240×240 pixel IPS panel driven by the ST7789 chipset. With 220 PPI and wide viewing angles up to 80° in any direction, this display delivers vi...

SKU: AF-3057 | Brand: Adafruit

Polyimide Tape (sometimes referred to by the brand name Kapton Tape) is an interesting addition to your toolbox! Polyimide Tape remains stable across a wide range of temperatures from about −269°C to +400°C.&n...

SKU: AF-4901 | Brand: Adafruit

The Adafruit GPIO Reference Card for Raspberry Pi Pico is a pocket-sized, full-colour pinout diagram printed on durable card stock. It provides a quick visual guide to every pin on the Pico, clearly labelling power, P...

SKU: AF-3893 | Brand: Adafruit

The JST PH 3-Pin to Male Header Cable converts a JST PH 3-pin connector into three individual colour-coded wires, each terminated with a 0.1" (2.54 mm) male header pin. It's ideal for extending sensor or LED connectio...

SKU: AF-3785 | Brand: Adafruit

This isolated PoE splitter takes a unified Power over Ethernet signal from a single RJ-45 cable and separates it into data (Ethernet) and regulated 5V DC power via a Micro USB plug. It works with any 802.3af-capable r...

SKU: AF-1143 | Brand: Adafruit

Add more power to your robot with this metal-geared MG90S servo. The tiny little servo can rotate approximately 90 degrees (45 in each direction), and works just like the standard kinds you're used to but smaller. You...

SKU: AF-6252 | Brand: Adafruit

A custom-designed snap-together enclosure for the Raspberry Pi Pico, Pico W, Pico 2, and Pico 2 W. 3D printed using an SLA process in translucent milky white plastic, the case allows the power LED to shine through whi...

SKU: AF-5345 | Brand: Adafruit

The Adafruit ESP32-S2 Reverse TFT Feather places a 1.14" IPS colour TFT display (240×135 pixels, ST7789) on the back of the board, making it ideal for panel-mounted projects where the screen faces outward through an e...

SKU: AF-4992 | Brand: Adafruit

Here's an easy solution for keeping your USB A devices free from dust and other unsavory particulates. These squishy Silicone USB A Dust Cover Inserts slip neatly into any computer or device w...

SKU: AF-4750 | Brand: Adafruit

Secure your project with biometrics - this adorably tiny, all-in-one, optical fingerprint sensor will make adding fingerprint detection and verification super simple. It's extremely slim, with a plastic casing that ca...

SKU: AF-2185 | Brand: Adafruit

This is your standard USB A-Plug to Micro-USB cable. It's 2 meters long so you'll have plenty of cord to work with for those longer extensions. Perfect for connecting to your Raspberry Pi, Arduino Leonard...

SKU: AF-2350 | Brand: Adafruit

These APA102 (DotStar) warm white LEDs feature an integrated driver chip inside each 5050 SMD package, giving you individually addressable brightness control over three warm white (~3000K) dies. The phosphor coating p...

SKU: AF-2424 | Brand: Adafruit

This stepper motor is a little different than the large NEMA-17 types you may be used to. These are often used in gauges for motorcycles and cars to replace the old-style fully-analog type. They have extremely fine...

SKU: AF-321 | Brand: Adafruit

Connect this to that without soldering using these handy alligator clip test leads. 20" cables with alligator clip on each end, color coded. You get 10 pieces in 5 colors. Strong and grippy, these always come in handy...

SKU: AF-3255 | Brand: Adafruit

A bundle of 12 jumper wires with a mini alligator clip on one end and a male header pin on the other. These are ideal for connecting sewable electronics (Flora, Gemma, micro:bit, Circuit Playground) and other non-head...

SKU: AF-1886 | Brand: Adafruit

If you want to make a kit you'll need some solder. This 0.1 lb (about 50 grams) spool is a good amount, not too much (like 1 lb spools) and not too little (like those little 'pocket clip' vials).This spool of solder c...

SKU: AF-3518 | Brand: Adafruit

This nifty little plastic tool provides you a super simple, super cheap means for adjusting the lens of your Raspberry Pi camera! Simply place the little hole opening snugly over the camera lens – it should se...

SKU: AF-2842 | Brand: Adafruit

A mid-density RGBW NeoPixel strip with 60 individually addressable LEDs per metre on a flexible white PCB. Each pixel contains four LED elements — red, green, blue, and a dedicated white — providing 32-bit colour cont...