Adafruit

SKU: AF-3585 | Brand: Adafruit

ANT700 from Great Scott Gadgets is a lightweight telescopic antenna designed for operation from 300 MHz to 1100 MHz. Its total length is configurable from 9.5 cm to 24.5 cm. ANT700 is constructed of stainless steel...

SKU: AF-3587 | Brand: Adafruit

These incredibly small surface-mount LEDs are an easy way to add a lot of very tiny (but bright!) colorful dots to your project. They're mini versions of our digital DotStart strips and matrices with full chai...

SKU: AF-3606 | Brand: Adafruit

The Mongoose OS Google IoT Core Pack is a complete starter kit for building IoT projects with Google Cloud, built around the Adafruit Feather HUZZAH32 (ESP32). Developed in collaboration with Google and Mongoose OS, t...

SKU: AF-3622 | Brand: Adafruit

Add heat-vision to any Feather board with the Adafruit AMG8833 Thermal Camera FeatherWing. This sensor from Panasonic contains an 8×8 array of infrared thermal sensors that returns 64 individual temperature readings o...

SKU: AF-3603 | Brand: Adafruit

The PCB set for building your own x0xb0x synthesizer — an open-source clone of the legendary Roland TB-303 bass line synthesizer, designed by Ladyada (Limor Fried). This is a challenging DIY project for experienced bu...

SKU: AF-6303 | Brand: Adafruit

Designed for display-driven embedded projects, this Feather-format board places its 1.14-inch IPS TFT on the rear so the screen can sit neatly behind a panel or enclosure cut-out. It combines an ESP32-S3 Wi-Fi and Blu...

SKU: AF-5811 | Brand: Adafruit

This compact breakout gives you a high-resolution analogue voltage output from a simple I2C interface, based on the AD5693R 16-bit DAC. It includes a temperature-compensated 2.5V internal reference, making it a handy ...

SKU: AF-5889 | Brand: Adafruit

This compact wireless development board gives you a full-featured ESP32 platform in the familiar ItsyBitsy format. It uses the ESP32 PICO ECO V3 in an FCC-certified ESP32 Pico module, combining a dual-core 240MHz proc...

SKU: AF-5832 | Brand: Adafruit

This breakout brings the INA228 power monitoring chip out to an easy-to-use board for measuring DC current, bus voltage and calculated power on either the high side or the low side of a circuit. It combines a wide com...

SKU: AF-6313 | Brand: Adafruit

Add a crisp monochrome display and simple user controls to your Feather project with this fully assembled FeatherWing. It combines a 128x64 white OLED screen with three user buttons labelled A, B and C, plus a reset b...

SKU: AF-5633 | Brand: Adafruit

This breakout makes it much easier to prototype with external QSPI flash memory on modern microcontrollers such as the RP2040, ESP32, RT10xx and STM32 families. It adapts a wide 8-SOIC flash package to a neat 0.3" wid...

SKU: AF-6388 | Brand: Adafruit

This compact breakout makes it easy to measure magnetic fields in three axes for compass, navigation and orientation projects. It is built around the QMC5883P, a magnetometer commonly used in quadcopter and robotics d...

SKU: AF-5892 | Brand: Adafruit

This breakout makes it much easier to use the tiny MAX4544 SPDT analogue switch in prototypes and one-off builds. It gives you a solid-state alternative to a relay for switching between two analogue signal paths, with...

SKU: AF-6352 | Brand: Adafruit

This classroom-friendly kit pairs a micro:bit v2.2 with a simple soil sensor so students can monitor a pot plant and learn a bit of programming at the same time. It was designed to work with the "FarmBeats for Student...

SKU: AF-5800 | Brand: Adafruit

Built for larger TTL-interface TFTs, this development board makes it much easier to experiment with 40-pin RGB-666 displays using an ESP32-S3. It is aimed at panels that go beyond the usual SPI-driven sizes and resolu...

SKU: AF-6482 | Brand: Adafruit

Built around Texas Instruments' TMP119, this breakout makes it easy to add extremely accurate temperature monitoring to your project over I2C. It is designed for applications where temperature really matters, includin...

SKU: AF-5888 | Brand: Adafruit

This handy STEMMA board lets you control 'true analog' LED strips and other PWM-able LEDs from a NeoPixel-compatible data line, without the usual extra wiring of separate driver FETs. A WS2811F handles the 800KHz NeoP...

SKU: AF-6359 | Brand: Adafruit

This breakout lets you add an ideal diode to a higher-current DC power path without the usual forward voltage drop of a standard diode. It is designed for 3~23V DC supplies and up to 5A, using the LM73100's back-to-ba...