Adafruit

SKU: AF-973 | Brand: Adafruit

A 50 cm (19.5″) servo extension cable for extending the reach of standard 3-pin servo connections. It features a shrouded male connector on one end and a female connector on the other, with red/black/white colour codi...

SKU: AF-1134 | Brand: Adafruit

A sturdy, breadboard-friendly 5-pin DIN MIDI jack with all pins on standard 0.1" (2.54 mm) spacing. Perfect for adding MIDI input or output to your Arduino or microcontroller project without any adapter boards. This ...

SKU: AF-578 | Brand: Adafruit

A matched pair of 4-wire cables with JST SM connectors — one plug and one receptacle — for easy plug-and-unplug connections. Each cable is 15cm long with a latching connector that stays secure during use but disconnec...

SKU: AF-1196 | Brand: Adafruit

A 12-wire slip ring assembly that allows continuous 360° rotation while maintaining electrical continuity. The gold-plated internal contacts ensure reliable signal and power transfer across all 12 colour-coded wire se...

SKU: AF-4079 | Brand: Adafruit

This 2×20 female socket riser header features slightly longer-than-standard pins, adding extra height between your Raspberry Pi and any HAT, Bonnet, or pHAT mounted on top. This additional clearance helps boards clear...

SKU: AF-4048 | Brand: Adafruit

A compact 1.27 mm (0.05") pitch 2×5 mini SWD box header with a half-shroud and key-notch. A smaller alternative to full-shroud SWD headers, taking up much less board space while remaining compatible with standard 10-p...

SKU: AF-4030 | Brand: Adafruit

This cable will let you turn a JST PH 3-pin cable port into 3 individual wires with grippy mini alligator clips. We're carrying these to match up with any of our boards or breakouts with 3-pin 'STEMMA' connector...

SKU: AF-1351 | Brand: Adafruit

A simple 2-way DC barrel jack splitter that lets you power two devices from a single power adapter. Plug in one standard 5.5mm/2.1mm DC barrel jack and get two identical outputs — perfect for powering multiple boards ...

SKU: AF-3691 | Brand: Adafruit

You've done such a great job making your own electronic control panel that the last thing you need are those wires to get pulled out and frizzy. These fancy Panel-Mount Banana Jacks look good and ...

SKU: AF-2003 | Brand: Adafruit

Super-flexible, silicone-sheathed stranded-core wire in black. The silicone insulation is incredibly soft and supple, making this wire ideal for wearable electronics, robotics, and any project where the wiring needs t...

SKU: AF-1882 | Brand: Adafruit

Silicone-sheathing wire is super-flexible and soft, and its also strong! Able to handle up to 200°C and up to 600V, it will do when PVC covered wire wimps out. We like this wire for being extremely supple and flexible...

SKU: AF-2094 | Brand: Adafruit

This adapter board is designed for adapting a 'classic' 2x10 (0.1"/2.54mm pitch) JTAG cable to a slimmer 2x5 (0.05"/1.27mm pitch) SWD Cable.  It's helpful for using products like the JTAGulator or SEGGER J-...

SKU: AF-2197 | Brand: Adafruit

This flat HDMI 1.4 cable connects two full-size HDMI devices together in a slim, flexible form factor. At just 30 cm (1 foot) long, it's ideal for tight installations where a standard round cable would be too bulky. ...

SKU: AF-2102 | Brand: Adafruit

This 2×5 (10-pin) IDC breadboard helper makes it easy to connect standard 10-pin IDC ribbon cables to a breadboard or Perma-Proto board. The two-piece design consists of a pin-through socket that straddles the centre ...

SKU: AF-366 | Brand: Adafruit

These 2 mm pitch 10-pin socket headers are designed specifically for XBee modules, which use 2 mm pin spacing instead of the standard 2.54 mm (0.1″) pitch. Each pack includes two sockets — one for each side of the XBe...

SKU: AF-2698 | Brand: Adafruit

A 1-metre 3.5 mm (1/8") male-to-male stereo audio cable for connecting any two devices with standard headphone jacks. Works with smartphones, tablets, MP3 players, car stereos, portable speakers, and audio development...

SKU: AF-2888 | Brand: Adafruit

A BNC (Bayonet Neill–Concelman) male plug with a screw terminal block for solderless connections. Use stranded or solid-core wire and a small screwdriver to create custom wiring jigs for test equipment, video signals,...

SKU: AF-80 | Brand: Adafruit

A high-quality 9V battery clip with a pre-assembled 5.5mm/2.1mm centre-positive barrel connector. The moulded plastic clip covers the battery terminals to prevent short circuits, and the barrel plug connects directly ...

SKU: AF-3157 | Brand: Adafruit

This camera cable is specifically designed to work with the Raspberry Pi Zero - Version 1.3! Just plug it into your Pi Zero's camera port and then the other end into one of the official Pi Cameras for photo & video...

SKU: AF-3118 | Brand: Adafruit

Make your own custom HDMI cable or HDMI interface with ease, using this HDMI Terminal Block Breakout. You get a nice solid PCB with an HDMI plug and two strips of terminal blocks that you can use with stranded or s...