Adafruit
Shop Adafruit products at Little Bird Electronics, your trusted Australian source for this iconic maker brand. From NeoPixel LEDs and Feather microcontrollers to Circuit Playground boards and TFT displays, we stock a wide range of Adafruit-designed hardware for every project.
Whether you're building interactive wearables, learning electronics in the classroom, or prototyping IoT devices, Adafruit's well-documented ecosystem makes it easy to get started. Available for delivery across Australia.
Short Socket Headers for Raspberry Pi Pico - 2 x 20 pin Female
SKU: AF-5585 | Brand: Adafruit
These Socket Headers alone are, well, lonely. But pair them with the Raspberry Pi Pico, and you're in business!These headers are particularly cute and tiny with a body height of just 5.0 mm they are the...
Delivered by Fri 12 Jun
2.5mm Pitch 4-pin Cable Matching Pair - JST XH compatible
SKU: AF-4874 | Brand: Adafruit
A matching pair of 4-pin JST XH-compatible cables — one with an inline plug and one with an inline socket — for easy connect-and-disconnect wiring. The 2.5mm pitch connectors friction-lock together for a secure, relia...
Delivered by Thu 2 Jul
Premium Female/Male 'Extension' Jumper Wires - 20 x 6
SKU: AF-1954 | Brand: Adafruit
These Female/Male Extension jumper wires are handy for making wire harnesses or jumpering between headers on PCB's. These premium jumper wires are 6" (150mm) long and come in a 'strip' of 20 (2 pieces of ea...
Delivered by Fri 12 Jun
PCIe Flex Cable for NVMe Base and Raspberry Pi 5 – PCIe Pipe
SKU: AF-5931 | Brand: Adafruit
This PCIe Flex Cable gives you a variety of options for connecting and placing your Pimoroni NVMe Base with Raspberry Pi 5. They have a 'one way' design with 16 pads at the Raspberry Pi 5 end and 18 pins at the NVMe B...
Delivered by Thu 2 Jul
2.5mm Pitch 3-pin Cable Matching Pair - JST XH Compatible
SKU: AF-4873 | Brand: Adafruit
A matching pair of 3-pin JST XH-compatible cables — one with an inline plug and one with an inline socket — for easy connect-and-disconnect wiring. The 2.5mm pitch connectors friction-lock together for a secure, relia...
Delivered by Fri 12 Jun
GPIO Ribbon Cable 2x8 IDC Cable - 16 pins 12 long
SKU: AF-4170 | Brand: Adafruit
A 16-pin (2×8) IDC ribbon cable with keyed connectors on both ends, 305mm (12") long. The 0.05" pitch ribbon cable connects to standard 2×8 0.1" × 0.1" IDC headers. Pin 1 is marked with a white stripe along the cable ...
Delivered by Fri 12 Jun
JST-PH 2-Pin SMT Right Angle Connector
SKU: AF-1769 | Brand: Adafruit
This JST PH 2-pin SMT right-angle connector is a surface-mount header designed to accept standard JST PH 2-pin plugs. It's commonly used as a battery connector on microcontroller boards, LiPo chargers, and small elect...
Delivered by Fri 12 Jun
Short Feather Headers Kit - 12-pin and 16-pin Female Header Set
SKU: AF-2940 | Brand: Adafruit
These two Short Female Headers alone are, well, lonely. But pair them with any of our Feather boards and you're in business! These headers are particularly cute and tiny with a body height of just...
Delivered by Thu 2 Jul
2.54mm / 0.1" Pitch Press-Fit Male Pin Header
SKU: AF-5938 | Brand: Adafruit
A breakaway strip of 36 press-fit male pin headers at standard 2.54mm (0.1") pitch. These headers can be attached to PCBs without soldering — press them firmly into place using pliers for a friction-fit connection tha...
Delivered by Fri 12 Jun
Molex Pico Blade 2-pin Cable - 200mm
SKU: AF-3922 | Brand: Adafruit
A 200 mm Molex PicoBlade 2-pin cable with 1.25 mm pitch connectors. The ultra-slim PicoBlade format takes up minimal PCB space while providing a secure friction-lock connection — ideal when standard 0.1" or JST PH con...
Delivered by Thu 2 Jul
RP-SMA to uFL/u.FL/IPX/IPEX RF Adapter Cable
SKU: AF-852 | Brand: Adafruit
This RF adapter cable is super handy for anyone doing RF work. Often times, small electronics save space by having a pick-and-placeable u.FL connector (also called uFL, IPEX, IPAX, IPX, MHF, and AM). But most anten...
Delivered by Thu 2 Jul
DIY HDMI Cable Parts - 30 cm HDMI Ribbon Cable
SKU: AF-3562 | Brand: Adafruit
If you're looking to make a custom cable with any two of our HDMI adapters, then you'll need to have these flex cables handy! Making custom HDMI cables has never been easier. Just grab one of these cables...
Delivered by Fri 12 Jun
GPIO Female Socket Riser Header - 2x2 4-pin
SKU: AF-4855 | Brand: Adafruit
A 2×2 (4-pin) female socket riser header with standard 2.54 mm (0.1 in) pitch, designed to fit the PoE header on the Raspberry Pi 3 B+ and 4. Use it alongside a 2×20 stacking header to raise the PoE HAT high enough to...
Delivered by Fri 12 Jun
Rainbow Wire Wrap Thin 30 AWG Prototyping Repair Wire - 280 meters total - 35m each of 8
SKU: AF-4730 | Brand: Adafruit
This stuff is called "wire-wrap wire" because it used to be used for wire-wrapping high-speed digital circuits on a special kind of contact board. It's pretty rare to see wire-wrapping in these days of low-cost PCB fa...
Delivered by Fri 12 Jun
RJ-45 Ethernet Round Panel Mount Adapter Plug
SKU: AF-4130 | Brand: Adafruit
This RJ-45 round panel mount adapter provides an Ethernet pass-through connection that installs in a standard round drill hole — no rectangular cutouts or filing required. Drill a ~30 mm hole in wood, plastic, or meta...
Delivered by Fri 12 Jun
Panel Mount 1/8 (3.5mm) TRS Jack Connector
SKU: AF-3692 | Brand: Adafruit
What is this TRS bit? Turtle Rock Studios? Transmission Raman Spectroscopy? Not quite, more like Tip-Ring-Sleeve. This nifty, gold-plated connector is known by many names, phone plug, phone jack, headphone j...
Delivered by Thu 2 Jul
Short Wire Alligator Clip Test Lead (set of 12)
SKU: AF-1592 | Brand: Adafruit
A set of 12 short alligator clip test leads for making quick temporary connections without soldering. Each lead has a vinyl-covered alligator clip on both ends, colour-coded across six colours for easy circuit identif...
Delivered by Fri 12 Jun
Silicone Cover Stranded-Core Wire - 2m 30AWG Yellow
SKU: AF-2004 | Brand: Adafruit
Silicone-sheathing wire is super-flexible and soft, and its also strong! Able to handle up to 200°C and up to 600V, it will do when PVC covered wire wimps out. We like this wire for being extremely supple and flexible...
Delivered by Fri 12 Jun
JST-PH 2-Pin SMT Right Angle Breakout Board
SKU: AF-1862 | Brand: Adafruit
A simple 2-pin connector soldered onto a breadboard-friendly breakout. This is compatible with the "JST PH 2-pin" connector. Mates perfectly with all our 1-cell LiPoly and LiIon batteries as well as our 6V coin ...
Delivered by Fri 12 Jun
Male DC Power adapter - 2.1mm plug to screw terminal block
SKU: AF-369 | Brand: Adafruit
If you need to connect a battery pack or wired power supply to a board that has a DC jack - this adapter will come in very handy! There is a 2.1mm DC plug on one end, and a screw terminal block on the other. The termi...
Delivered by Fri 12 Jun
Compare your options
All buying guides
The Teacher's Guide to micro:bit Robots: Kits, Buggies, and Robotics Compared
Compare micro:bit-compatible robot kits, buggies, and robotics platforms by age range, assembly difficulty, sensors, and curriculum fit — for classrooms, clubs, and home learners across Australia.
49 products compared
The Maker's Guide to Servos: Torque, Speed, and Control Compared
Compare hobby and industrial servos by torque, rotation range, and control type (PWM, digital, continuous) to pick the right motor for robotics, animatronics, and RC projects.
16 products compared
Title The Maker's Guide to ADCs: Resolution, Speed, and Interface Compared
Compare analogue-to-digital converters by bit depth, sample rate, and bus (I²C vs SPI) to pick the right chip for your Arduino, Raspberry Pi, or microcontroller project.
16 products compared
