Adafruit

SKU: AF-1988 | Brand: Adafruit

That new Raspberry Pi® Model B+ computer you just got has a row of 2x20 pin headers soldered on - those are the GPIO (general purpose input/output) pins and for those of us who like to hack electronics they are where ...

SKU: AF-1954 | Brand: Adafruit

These Female/Male Extension jumper wires are handy for making wire harnesses or jumpering between headers on PCB's. These premium jumper wires are 6" (150mm) long and come in a 'strip' of 20 (2 pieces of ea...

SKU: AF-3560 | Brand: Adafruit

A 10cm (~4″) flexible HDMI ribbon cable for building custom HDMI connections with DIY HDMI adapters. Simply clip any two compatible HDMI plug adapters onto each end of the ribbon cable to create the exact cable config...

SKU: AF-4215 | Brand: Adafruit

Add a panel-mount Ethernet port to any enclosure without cutting custom shapes. This RJ-45 round panel mount extension cable fits a standard ~30 mm round hole — just drill with a common hole saw, unscrew the plastic n...

SKU: AF-4873 | Brand: Adafruit

A matching pair of 3-pin JST XH-compatible cables — one with an inline plug and one with an inline socket — for easy connect-and-disconnect wiring. The 2.5mm pitch connectors friction-lock together for a secure, relia...

SKU: AF-4170 | Brand: Adafruit

A 16-pin (2×8) IDC ribbon cable with keyed connectors on both ends, 305mm (12") long. The 0.05" pitch ribbon cable connects to standard 2×8 0.1" × 0.1" IDC headers. Pin 1 is marked with a white stripe along the cable ...

SKU: AF-1769 | Brand: Adafruit

This JST PH 2-pin SMT right-angle connector is a surface-mount header designed to accept standard JST PH 2-pin plugs. It's commonly used as a battery connector on microcontroller boards, LiPo chargers, and small elect...

SKU: AF-5938 | Brand: Adafruit

A breakaway strip of 36 press-fit male pin headers at standard 2.54mm (0.1") pitch. These headers can be attached to PCBs without soldering — press them firmly into place using pliers for a friction-fit connection tha...

SKU: AF-3562 | Brand: Adafruit

If you're looking to make a custom cable with any two of our HDMI adapters, then you'll need to have these flex cables handy! Making custom HDMI cables has never been easier. Just grab one of these cables...

SKU: AF-4855 | Brand: Adafruit

A 2×2 (4-pin) female socket riser header with standard 2.54 mm (0.1 in) pitch, designed to fit the PoE header on the Raspberry Pi 3 B+ and 4. Use it alongside a 2×20 stacking header to raise the PoE HAT high enough to...

SKU: AF-4730 | Brand: Adafruit

This stuff is called "wire-wrap wire" because it used to be used for wire-wrapping high-speed digital circuits on a special kind of contact board. It's pretty rare to see wire-wrapping in these days of low-cost PCB fa...

SKU: AF-4130 | Brand: Adafruit

This RJ-45 round panel mount adapter provides an Ethernet pass-through connection that installs in a standard round drill hole — no rectangular cutouts or filing required. Drill a ~30 mm hole in wood, plastic, or meta...

SKU: AF-1592 | Brand: Adafruit

A set of 12 short alligator clip test leads for making quick temporary connections without soldering. Each lead has a vinyl-covered alligator clip on both ends, colour-coded across six colours for easy circuit identif...

SKU: AF-2136 | Brand: Adafruit

A compact 3-pin screw terminal block with 2.54mm (0.1") pitch, designed to fit directly into perfboard and protoboards. Terminal blocks provide reliable, tool-adjustable PCB-to-wire connections that are easy to mainta...

SKU: AF-2004 | Brand: Adafruit

Silicone-sheathing wire is super-flexible and soft, and its also strong! Able to handle up to 200°C and up to 600V, it will do when PVC covered wire wimps out. We like this wire for being extremely supple and flexible...

SKU: AF-1862 | Brand: Adafruit

A simple 2-pin connector soldered onto a breadboard-friendly breakout. This is compatible with the "JST PH 2-pin" connector. Mates perfectly with all our 1-cell LiPoly and LiIon batteries as well as our 6V coin ...

SKU: AF-369 | Brand: Adafruit

If you need to connect a battery pack or wired power supply to a board that has a DC jack - this adapter will come in very handy! There is a 2.1mm DC plug on one end, and a screw terminal block on the other. The termi...

SKU: AF-3174 | Brand: Adafruit

This is a box of ten 25ft spools of solid-core wire. The wire is easy to solder to, and when bent it keeps its shape pretty well. We like to have a few spools of this stuff around which is why this set is quite n...

SKU: AF-5765 | Brand: Adafruit

A 100mm adapter cable with a 1mm pitch JST SH 3-pin connector on one end and 0.1" (2.54mm) pitch socket headers on the other. Ideal for connecting to JST SH ports on development boards such as the Raspberry Pi Pico De...

SKU: AF-5244 | Brand: Adafruit

A 100 mm pigtail cable with a Seeed Grove connector on one end and four bare wires on the other, for connecting Grove-compatible boards and breakouts to custom wiring. Specifications Connector – Grove (2 mm pitch),...