Adafruit
Shop Adafruit products at Little Bird Electronics, your trusted Australian source for this iconic maker brand. From NeoPixel LEDs and Feather microcontrollers to Circuit Playground boards and TFT displays, we stock a wide range of Adafruit-designed hardware for every project.
Whether you're building interactive wearables, learning electronics in the classroom, or prototyping IoT devices, Adafruit's well-documented ecosystem makes it easy to get started. Available for delivery across Australia.
Adafruit SPI Non-Volatile FRAM Breakout - 4 Mbit / 512 KBytes - MB85RS4MT
SKU: AF-4719 | Brand: Adafruit
The Adafruit SPI Non-Volatile FRAM Breakout provides 4 Mbit (512 KBytes) of ferroelectric RAM (FRAM) storage over SPI. FRAM combines the non-volatile retention of flash with the instant read/write speed of SRAM — no p...
Delivered by Fri 12 Jun
Adafruit Ultimate GPS Logger Shield - Includes GPS Module
SKU: AF-1272 | Brand: Adafruit
The Adafruit Ultimate GPS Logger Shield combines the popular Ultimate GPS module with a MicroSD card slot, giving your Arduino a complete GPS datalogging solution. Built around the MTK3339 chipset, it tracks up to 22 ...
Delivered by Fri 12 Jun
CAP1188 - 8-Key Capacitive Touch Sensor Breakout - I2C or SPI
SKU: AF-1602 | Brand: Adafruit
Add lots of touch sensors to your next microcontroller project with this easy-to-use 8-channel capacitive touch sensor breakout board, starring the CAP1188. This chip can handle up to 8 individual touch pads, and has ...
Delivered by Thu 2 Jul
Adafruit RFM69HCW Transceiver Radio Breakout - 433 MHz
SKU: AF-3071 | Brand: Adafruit
The Adafruit RFM69HCW Transceiver Radio Breakout @ 433 MHz is a breadboard-friendly packet radio module for adding long-range wireless communication to Arduino and other microcontroller projects. Based on the SX1231 t...
Delivered by Thu 2 Jul
Adafruit CAN Bus FeatherWing - MCP2515
SKU: AF-5709 | Brand: Adafruit
The Adafruit CAN Bus FeatherWing adds CAN bus networking to any Feather board. It uses the MCP2515 CAN controller and TJA1051/3 transceiver to send and receive messages in standard or extended format at up to 1 Mbps o...
Delivered by Fri 12 Jun
Adafruit BMP280 I2C or SPI Barometric Pressure Altitude Sensor
SKU: AF-2651 | Brand: Adafruit
The BMP280 from Bosch is a precision barometric pressure and temperature sensor, and the next-generation upgrade to the BMP085/BMP180/BMP183 family. With support for both I2C and SPI communication, it offers flexibili...
Delivered by Fri 12 Jun
Adafruit Ethernet FeatherWing
SKU: AF-3201 | Brand: Adafruit
Wireless is wonderful, but sometimes you need the strong reliability of a wired connection. The Ethernet FeatherWing adds quick and easy wired Internet to any Feather board — just plug in a standard Ethernet cable and...
Delivered by Fri 12 Jun
Adafruit LoRa Radio FeatherWing - RFM95W 900 MHz
SKU: AF-3231 | Brand: Adafruit
Add long-range LoRa radio to any Feather board with the Adafruit LoRa Radio FeatherWing. Built around the SX127x LoRa module, this add-on provides kilometre-range packet radio communication at 900 MHz (tuneable to 868...
Delivered by Thu 2 Jul
PN532 NFC/RFID controller breakout board [v1.6]
SKU: AF-364 | Brand: Adafruit
The PN532 is the most popular NFC chip, and is what is embedded in pretty much every phone or device that does NFC. It can pretty much do it all, such as read and write to tags and cards, communicate with phones (s...
Delivered by Fri 12 Jun
Adafruit microSD Card BFF Add-On for QT Py and Xiao
SKU: AF-5683 | Brand: Adafruit
The Adafruit microSD Card BFF Add-On slots onto the back of any QT Py or Xiao board, adding a microSD card slot for megabytes or gigabytes of file storage. Using the SPI bus (MOSI/MISO/SCK) plus one chip select pin, y...
Delivered by Thu 2 Jul
Adafruit EYESPI Breakout Board - 18 Pin FPC Connector
SKU: AF-5613 | Brand: Adafruit
The EYESPI Breakout Board brings the 18-pin EYESPI FPC connector out to standard 0.1"-spaced headers, making it easy to breadboard and prototype with EYESPI-compatible displays. Each pin is clearly labelled, and for m...
Delivered by Fri 12 Jun
Adafruit BME680 - Temperature, Humidity, Pressure and Gas Sensor
SKU: AF-3660 | Brand: Adafruit
The BME680 from Bosch delivers comprehensive environmental sensing in a single compact package. This precision sensor measures temperature, humidity, barometric pressure, and VOC gas levels, all accessible over I2C or...
Delivered by Thu 2 Jul
Adafruit Assembled Pi T-Cobbler Breakout for Raspberry Pi
SKU: AF-1754 | Brand: Adafruit
The Adafruit Pi T-Cobbler breaks out all the power, GPIO, I2C and SPI pins from the Raspberry Pi's 26-pin header onto a solderless breadboard in a T-shaped layout. The wider T-shape makes the pin labels easier to read...
Delivered by Fri 12 Jun
Adafruit Bluefruit LE Shield - Bluetooth LE for Arduino
SKU: AF-2746 | Brand: Adafruit
The Adafruit Bluefruit LE Shield adds Bluetooth Low Energy connectivity to your Arduino in a plug-in shield form factor. Solder the included headers, stack it on your Arduino, and start communicating wirelessly with i...
Delivered by Fri 12 Jun
Adafruit RFM69HCW Transceiver Radio Breakout - 868 or 915 MHz
SKU: AF-3070 | Brand: Adafruit
The Adafruit RFM69HCW Transceiver Radio Breakout @ 868/915 MHz is a breadboard-friendly packet radio module for adding long-range wireless communication to Arduino and other microcontroller projects. Based on the SX12...
Delivered by Thu 2 Jul
i2c / SPI character LCD backpack
SKU: AF-292 | Brand: Adafruit
LCD backpacks reduce the number of pins needed to connect to an LCD. LCDs are a fun and easy way to have your microcontroller project talk back to you. Character LCDs are common, and easy to get, available in tons ...
Delivered by Fri 12 Jun
Adafruit SPI Non-Volatile FRAM Breakout - 64Kbit / 8KByte
SKU: AF-1897 | Brand: Adafruit
The Adafruit SPI Non-Volatile FRAM Breakout provides 64 Kbit (8 KBytes) of ferroelectric RAM (FRAM) storage over SPI. FRAM combines the non-volatile retention of flash with the instant read/write speed of SRAM — no pa...
Delivered by Fri 12 Jun
Adafruit 0.96 160x80 Color TFT Display w/ MicroSD Card Breakout [ST7735]
SKU: AF-3533 | Brand: Adafruit
The Adafruit 0.96" 160×80 Colour TFT Display Breakout is a tiny, high-density full-colour screen driven by the ST7735R controller. Despite its thumbnail size, it packs 160×80 RGB pixels and communicates over 4-wire SP...
Delivered by Thu 2 Jul
Adafruit SPI Flash SD Card - XTSD 2 GB
SKU: AF-6038 | Brand: Adafruit
The Adafruit SPI Flash SD Card breakout features an XTSD 2 GB chip — an SD card in an SMT package that you can wire up like standard SPI flash but use with existing SD card libraries. It comes pre-formatted as a 2 GB ...
Delivered by Thu 2 Jul
Adafruit USB Host BFF for QT Py or Xiao with MAX3421E
SKU: AF-5956 | Brand: Adafruit
The Adafruit USB Host BFF adds a USB Host port to your QT Py or Xiao microcontroller, letting you connect keyboards, mice, USB drives, and other standard USB peripherals to your tiny project. It uses the MAX3421E USB ...
Delivered by Thu 2 Jul
Compare your options
All buying guides
The Teacher's Guide to micro:bit Robots: Kits, Buggies, and Robotics Compared
Compare micro:bit-compatible robot kits, buggies, and robotics platforms by age range, assembly difficulty, sensors, and curriculum fit — for classrooms, clubs, and home learners across Australia.
49 products compared
The Maker's Guide to Servos: Torque, Speed, and Control Compared
Compare hobby and industrial servos by torque, rotation range, and control type (PWM, digital, continuous) to pick the right motor for robotics, animatronics, and RC projects.
16 products compared
Title The Maker's Guide to ADCs: Resolution, Speed, and Interface Compared
Compare analogue-to-digital converters by bit depth, sample rate, and bus (I²C vs SPI) to pick the right chip for your Arduino, Raspberry Pi, or microcontroller project.
16 products compared
