Adafruit
Shop Adafruit products at Little Bird Electronics, your trusted Australian source for this iconic maker brand. From NeoPixel LEDs and Feather microcontrollers to Circuit Playground boards and TFT displays, we stock a wide range of Adafruit-designed hardware for every project.
Whether you're building interactive wearables, learning electronics in the classroom, or prototyping IoT devices, Adafruit's well-documented ecosystem makes it easy to get started. Available for delivery across Australia.
JST PH 4-pin Horizontal Connector (10-pack)
SKU: AF-4392 | Brand: Adafruit
Designing boards with plug-n-play connectivity is a snap, with STEMMA connectors. Here's a pack of 10 of our favorite 2mm pitch connector - the JST PH 4 pin. These are the horizontal style. You can use these w...
Delivered by Wed 4 Nov
JST SH 4-pin Vertical Connector (10-pack)
SKU: AF-4328 | Brand: Adafruit
A 10-pack of JST SH 4-pin vertical connectors with 1 mm pitch through-hole mounting tabs. These micro connectors are compatible with the Qwiic/STEMMA QT ecosystem, making them perfect for adding I²C connectivity to cu...
Delivered by Wed 4 Nov
Adafruit TCA4307 Hot-Swap I2C Buffer with Stuck Bus Recovery
SKU: AF-5159 | Brand: Adafruit
The Adafruit TCA4307 Hot-Swap I2C Buffer protects your main I2C bus from glitches caused by hot-plugging STEMMA QT / Qwiic peripherals. I2C wasn't designed for hot-swapping, and plugging or unplugging at the wrong mom...
Delivered by Tue 13 Oct
AM2315C - Encased I2C Temperature/Humidity Sensor
SKU: AF-5182 | Brand: Adafruit
The AM2315C is an enclosed I2C temperature and humidity sensor featuring the modern AHT20 sensor inside a rugged housing with mounting bracket. It offers the same convenient form factor as the original AM2315 but with...
Delivered by Wed 4 Nov
Adafruit QT Py - SAMD21 Dev Board with STEMMA QT
SKU: AF-4600 | Brand: Adafruit
The Adafruit QT Py SAMD21 is the original QT Py — a tiny development board built around the ATSAMD21E18 (ARM Cortex-M0+ at 48 MHz) with native USB, a STEMMA QT connector, and an RGB NeoPixel. It's the same chip found ...
Delivered by Tue 13 Oct
Adafruit CharliePlex LED Matrix Bonnet - 8x16 Green LEDs
SKU: AF-4120 | Brand: Adafruit
The Adafruit CharliePlex LED Matrix Bonnet features a 16×8 grid of green LEDs driven by the IS31FL3731 charlieplex driver over I2C. Simply plug it onto any Raspberry Pi with a 2×20 header for a bright, programmable 12...
Delivered by Wed 4 Nov
Adafruit HTU31 Temperature & Humidity Sensor Breakout Board
SKU: AF-4832 | Brand: Adafruit
The Adafruit HTU31 is a third-generation I²C temperature and humidity sensor from TE, offering improved accuracy and useful extras over its predecessor, the HTU21D. With typical humidity accuracy of ±2% (at 20–100% RH...
Delivered by Wed 4 Nov
Adafruit Feather RP2040
SKU: AF-4884 | Brand: Adafruit
The Feather RP2040 brings the Raspberry Pi RP2040 dual-core processor to the Feather platform. With two ARM Cortex M0+ cores running at ~125 MHz, 264 KB SRAM, 8 MB SPI flash, and the RP2040's unique PIO (Programmable ...
Delivered by Wed 4 Nov
Adafruit 2.23 Monochrome OLED Bonnet for Raspberry Pi
SKU: AF-4567 | Brand: Adafruit
The Adafruit 2.23" Monochrome OLED Bonnet gives your Raspberry Pi a bright, high-contrast display that's easy to read from across the room. Simply plug this pre-assembled bonnet onto any Pi with a 2×20 header and star...
Delivered by Wed 4 Nov
Adafruit AHT20 - Temperature Humidity Sensor Breakout Board - STEMMA QT / Qwiic
SKU: AF-4566 | Brand: Adafruit
The Adafruit AHT20 is an affordable I2C temperature and humidity sensor from the makers of the popular DHT22. It delivers reliable readings with standard I2C communication, making it easy to use with any Arduino, Rasp...
Delivered by Wed 4 Nov
Adafruit VCNL4040 Proximity and Lux Sensor - STEMMA QT
SKU: AF-4161 | Brand: Adafruit
The Adafruit VCNL4040 is a two-in-one proximity and ambient light sensor from Vishay. It measures proximity from 0 to 200 mm (~7.5 inches) using an on-board IR LED, and ambient light from 0.0125 to 6,553 lux — all ove...
Delivered by Wed 4 Nov
Assembled DC Motor + Stepper FeatherWing Add-on
SKU: AF-3243 | Brand: Adafruit
A Feather board without ambition is a Feather board without FeatherWings! This is the Fully assembled (with headers) DC Motor + Stepper FeatherWing which will let you use 2 x bi-polar stepper motors or 4 x brushed DC ...
Delivered by Wed 4 Nov
Adafruit PiRTC - Precise DS3231 Real Time Clock for Raspberry Pi
SKU: AF-4282 | Brand: Adafruit
The Adafruit PiRTC Precise DS3231 is a high-accuracy, battery-backed real-time clock that plugs directly onto your Raspberry Pi's GPIO header. Built around a genuine Maxim DS3231 with an integrated temperature-compens...
Delivered by Wed 4 Nov
Adafruit 7-Segment LED Matrix Backpack
SKU: AF-877 | Brand: Adafruit
Drive 4-digit 0.56" tall 7-segment displays with ease using this HT16K33-based I2C backpack. The driver handles all LED multiplexing over I2C, keeping your wiring simple — just two data pins for full numeric display w...
Delivered by Wed 4 Nov
Adafruit 0.54 Quad Alphanumeric FeatherWing Display - Yellow
SKU: AF-3131 | Brand: Adafruit
The Adafruit 0.54" Quad Alphanumeric FeatherWing Display in yellow adds a bright, easy-to-read 4-character 14-segment LED display to any Feather microcontroller. Each character can show full alphanumeric text (A–Z, 0–...
Delivered by Wed 4 Nov
Adafruit CharliePlex LED Matrix Bonnet - 8x16 Yellow LEDs
SKU: AF-4119 | Brand: Adafruit
The Adafruit CharliePlex LED Matrix Bonnet features a 16×8 grid of yellow LEDs driven by the IS31FL3731 charlieplex driver over I2C. Simply plug it onto any Raspberry Pi with a 2×20 header for a bright, programmable 1...
Delivered by Wed 4 Nov
Flora Lux Sensor - TSL2561 Light Sensor [v1.0]
SKU: AF-1246 | Brand: Adafruit
Add light-reactive sensing to your wearable Flora project with this high precision Lux sensor. The TSL2561 luminosity sensor is an advanced digital light sensor, ideal for use in a wide range of light situations. Comp...
Delivered by Tue 13 Oct
Adafruit 1.2 4-Digit 7-Segment Display w/I2C Backpack - Red
SKU: AF-1270 | Brand: Adafruit
The Adafruit 1.2" 4-Digit 7-Segment Display with I2C Backpack in red makes it easy to add a large, bright numeric display to any microcontroller project. The backpack handles all LED multiplexing and driving via I2C, ...
Delivered by Wed 4 Nov
Adafruit Feather nRF52840 Express
SKU: AF-4062 | Brand: Adafruit
The Feather nRF52840 Express upgrades the nRF52 Bluefruit with the Nordic nRF52840 — featuring 1 MB flash, 256 KB SRAM, native USB, and Bluetooth Low Energy in a single chip. Native USB means no separate serial conver...
Delivered by Wed 4 Nov
Adafruit 16x8 LED Matrix Driver Backpack - HT16K33 Breakout
SKU: AF-1427 | Brand: Adafruit
The Adafruit 16×8 LED Matrix Driver Backpack is a breadboard-friendly breakout for the HT16K33 multiplexed LED driver. Unlike the pre-configured LED backpacks, this version breaks out all 16 anode and 8 cathode pins, ...
Delivered by Tue 13 Oct
Compare your options
All buying guides
The Teacher's Guide to micro:bit Robots: Kits, Buggies, and Robotics Compared
Compare micro:bit-compatible robot kits, buggies, and robotics platforms by age range, assembly difficulty, sensors, and curriculum fit — for classrooms, clubs, and home learners across Australia.
49 products compared
The Maker's Guide to Servos: Torque, Speed, and Control Compared
Compare hobby and industrial servos by torque, rotation range, and control type (PWM, digital, continuous) to pick the right motor for robotics, animatronics, and RC projects.
16 products compared
Title The Maker's Guide to ADCs: Resolution, Speed, and Interface Compared
Compare analogue-to-digital converters by bit depth, sample rate, and bus (I²C vs SPI) to pick the right chip for your Arduino, Raspberry Pi, or microcontroller project.
16 products compared