Adafruit
Shop Adafruit products at Little Bird Electronics, your trusted Australian source for this iconic maker brand. From NeoPixel LEDs and Feather microcontrollers to Circuit Playground boards and TFT displays, we stock a wide range of Adafruit-designed hardware for every project.
Whether you're building interactive wearables, learning electronics in the classroom, or prototyping IoT devices, Adafruit's well-documented ecosystem makes it easy to get started. Available for delivery across Australia.
Adafruit VL6180X Time of Flight Distance Ranging Sensor (VL6180)
SKU: AF-3316 | Brand: Adafruit
The Adafruit VL6180X is a close-range Time-of-Flight (ToF) distance sensor from ST that measures from approximately 5 mm to 100 mm (up to 150–200 mm in good conditions). It also includes a built-in ambient light senso...
Delivered by Fri 12 Jun
Assembled Terminal Block Breakout FeatherWing for all Feathers
SKU: AF-2926 | Brand: Adafruit
The Terminal Block Breakout FeatherWing kit is like the Golden Eagle of prototyping FeatherWings (eg. majestic, powerful, good-looking). To start, you get a nice prototyping area underneath your Feather, wi...
Delivered by Fri 12 Jun
FLORA Sensor Pack
SKU: AF-1458 | Brand: Adafruit
Sense the world around you! The FLORA Sensor Pack includes many types of sensors for your wearable enjoyment. Sense motion, direction, color, light levels, touch, and connections with FLORA sensor breakouts and con...
Delivered by Fri 12 Jun
Adafruit S-35710 Low-Power Wake Up Timer Breakout
SKU: AF-5959 | Brand: Adafruit
The Adafruit S-35710 Wake Up Timer Breakout is an ultra-low-power watchdog timer that can be programmed to trigger an alarm from 1 second up to 194 days, using a 24-bit second counter. Drawing only 0.2 µA, it's an int...
Delivered by Fri 12 Jun
Adafruit EYESPI Pi Beret - Buttons, EYESPI and STEMMA QT
SKU: AF-5783 | Brand: Adafruit
The EYESPI Pi Beret is a slim HAT for Raspberry Pi that provides an EYESPI display connector, STEMMA QT port, buttons, and a slide switch — everything you need to add a colour TFT or E-Ink display and sensors to your ...
Delivered by Fri 12 Jun
Adafruit QT 5V to 3V Shifter Breakout - STEMMA QT / Qwiic
SKU: AF-5637 | Brand: Adafruit
The Adafruit QT 5V to 3V Shifter Breakout lets you safely connect 3.3 V STEMMA QT / Qwiic sensors to 5 V microcontrollers like the Arduino Uno. Many I2C sensors and Qwiic-compatible devices are not 5 V safe — connecti...
Delivered by Fri 12 Jun
Adafruit QT 3V to 5V Level Booster Breakout - STEMMA QT / Qwiic
SKU: AF-5649 | Brand: Adafruit
The Adafruit QT 3V to 5V Level Booster Breakout lets you connect 3.3 V STEMMA QT / Qwiic devices to sensors and peripherals that require 5 V power or logic. Most modern microcontrollers (ESP32, RP2040, SAMD, micro:bit...
Delivered by Fri 12 Jun
NeoKey 1x4 QT I2C - Four Mechanical Key Switches with NeoPixels
SKU: AF-4980 | Brand: Adafruit
The only thing better than a nice mechanical key is, perhaps, FOUR mechanical keys that also can glow any color of the rainbow - and that's what the Adafruit NeoKey 1x4 QT I2C Breakout will let you do! ...
Delivered by Fri 12 Jun
Adafruit TCA4307 Hot-Swap I2C Buffer with Stuck Bus Recovery
SKU: AF-5159 | Brand: Adafruit
The Adafruit TCA4307 Hot-Swap I2C Buffer protects your main I2C bus from glitches caused by hot-plugging STEMMA QT / Qwiic peripherals. I2C wasn't designed for hot-swapping, and plugging or unplugging at the wrong mom...
Delivered by Fri 12 Jun
Adafruit QT Py - SAMD21 Dev Board with STEMMA QT
SKU: AF-4600 | Brand: Adafruit
The Adafruit QT Py SAMD21 is the original QT Py — a tiny development board built around the ATSAMD21E18 (ARM Cortex-M0+ at 48 MHz) with native USB, a STEMMA QT connector, and an RGB NeoPixel. It's the same chip found ...
Delivered by Fri 12 Jun
Flora Lux Sensor - TSL2561 Light Sensor [v1.0]
SKU: AF-1246 | Brand: Adafruit
Add light-reactive sensing to your wearable Flora project with this high precision Lux sensor. The TSL2561 luminosity sensor is an advanced digital light sensor, ideal for use in a wide range of light situations. Comp...
Delivered by Fri 12 Jun
Adafruit 16x8 LED Matrix Driver Backpack - HT16K33 Breakout
SKU: AF-1427 | Brand: Adafruit
The Adafruit 16×8 LED Matrix Driver Backpack is a breadboard-friendly breakout for the HT16K33 multiplexed LED driver. Unlike the pre-configured LED backpacks, this version breaks out all 16 anode and 8 cathode pins, ...
Delivered by Fri 12 Jun
Adafruit Assembled Pi T-Cobbler Breakout for Raspberry Pi
SKU: AF-1754 | Brand: Adafruit
The Adafruit Pi T-Cobbler breaks out all the power, GPIO, I2C and SPI pins from the Raspberry Pi's 26-pin header onto a solderless breadboard in a T-shaped layout. The wider T-shape makes the pin labels easier to read...
Delivered by Fri 12 Jun
Quad Alphanumeric Display - White 0.54 Digits w/ I2C Backpack
SKU: AF-2157 | Brand: Adafruit
Display, elegantly, 012345678 or 9! Gaze, hypnotized, at ABCDEFGHIJKLM - well it can display the whole alphabet. You get the point. This is a nice, bright alphanumeric display that shows letters and numbers in a beaut...
Delivered by Fri 12 Jun
Arduino Pro Mini 328 - 5V/16 MHz
SKU: AF-2378 | Brand: Adafruit
The Arduino Pro Mini is SparkFun's minimal design approach to Arduino. It's essentially a 5v Arduino that runs an 16 MHz bootloader on a super small, super thin board. There are no connectors attached -...
Delivered by Fri 12 Jun
Adafruit LED Charlieplexed Matrix - 9x16 LEDs - Yellow
SKU: AF-2948 | Brand: Adafruit
The Adafruit LED Charlieplexed Matrix is a 9×16 grid of yellow LEDs arranged in a Charlieplexed configuration. Designed to pair with the IS31FL3731 LED matrix driver, this display lets you create scrolling text, anima...
Delivered by Fri 12 Jun
i2c / SPI character LCD backpack
SKU: AF-292 | Brand: Adafruit
LCD backpacks reduce the number of pins needed to connect to an LCD. LCDs are a fun and easy way to have your microcontroller project talk back to you. Character LCDs are common, and easy to get, available in tons ...
Delivered by Fri 12 Jun
Adafruit 0.8 8x16 LED Matrix FeatherWing Display Kit - White
SKU: AF-3149 | Brand: Adafruit
The Adafruit 0.8" 8x16 LED Matrix FeatherWing Display Kit in white pairs two miniature 8x8 LED matrices with a FeatherWing driver board to create a 128-pixel display for any Feather microcontroller. Use it for scrolli...
Delivered by Fri 12 Jun
Adafruit HTU21D-F Temperature Humidity Sensor Breakout Board - Fully Assembled
SKU: AF-3515 | Brand: Adafruit
The Adafruit HTU21D-F is an accurate I²C digital temperature and humidity sensor breakout board. With typical humidity accuracy of ±2% (optimised for 5–95% RH) and temperature accuracy of ±1°C across -30 to 90°C, it's...
Delivered by Fri 12 Jun
Monochrome 128x32 I2C OLED graphic display
SKU: AF-931 | Brand: Adafruit
A compact 0.96" (24.4 mm diagonal) monochrome OLED graphic display with 128 × 32 pixel resolution. Driven by the SSD1306 controller over I2C, each white OLED pixel is individually addressable, producing high-contrast,...
Delivered by Fri 12 Jun
Compare your options
All buying guides
The Teacher's Guide to micro:bit Robots: Kits, Buggies, and Robotics Compared
Compare micro:bit-compatible robot kits, buggies, and robotics platforms by age range, assembly difficulty, sensors, and curriculum fit — for classrooms, clubs, and home learners across Australia.
49 products compared
The Maker's Guide to Servos: Torque, Speed, and Control Compared
Compare hobby and industrial servos by torque, rotation range, and control type (PWM, digital, continuous) to pick the right motor for robotics, animatronics, and RC projects.
16 products compared
Title The Maker's Guide to ADCs: Resolution, Speed, and Interface Compared
Compare analogue-to-digital converters by bit depth, sample rate, and bus (I²C vs SPI) to pick the right chip for your Arduino, Raspberry Pi, or microcontroller project.
16 products compared
