Adafruit
Shop Adafruit products at Little Bird Electronics, your trusted Australian source for this iconic maker brand. From NeoPixel LEDs and Feather microcontrollers to Circuit Playground boards and TFT displays, we stock a wide range of Adafruit-designed hardware for every project.
Whether you're building interactive wearables, learning electronics in the classroom, or prototyping IoT devices, Adafruit's well-documented ecosystem makes it easy to get started. Available for delivery across Australia.
HDMI Dummy Plug
SKU: AF-4247 | Brand: Adafruit
What do you do when you want to tinker with GPU hardware, but you don't have a display on hand?This HDMI Dummy Plug is a small device that acts as a display emulator. Once it's plugged into the video output socket on ...
Delivered by Fri 12 Jun
4-pin JST PH to JST SH Cable - STEMMA / Grove to QT / Qwiic - 200mm long
SKU: AF-4424 | Brand: Adafruit
A 200mm adapter cable with a JST-SH 4-pin connector (STEMMA QT / Qwiic, 1mm pitch) on one end and a JST-PH 4-pin connector (STEMMA / Grove, 2mm pitch) on the other. Use it to bridge I2C sensors and drivers between the...
Delivered by Fri 12 Jun
Adafruit Mini PiTFT 1.3 - 240x240 TFT Add-on for Raspberry Pi
SKU: AF-4484 | Brand: Adafruit
The Adafruit Mini PiTFT 1.3" is a compact 240×240 pixel IPS colour display that snaps directly onto any Raspberry Pi via the GPIO header. With vibrant colours and excellent viewing angles, it's ideal for adding a user...
Delivered by Thu 2 Jul
JST SH 4-Pin to Premium Male Headers Cable - Qwiic Compatible - 150mm Long
SKU: AF-4209 | Brand: Adafruit
This 4-wire cable is a little over 150mm / 6" long and fitted with JST-SH female 4-pin connectors on one end and premium Dupont male headers on the other. Compared with the chunkier JST-PH these are 1mm pitch instead ...
Delivered by Thu 2 Jul
Adafruit DC Stepper Motor HAT for Raspberry Pi - Mini Kit
SKU: AF-2348 | Brand: Adafruit
The Adafruit DC & Stepper Motor HAT drives up to 4 DC motors or 2 stepper motors from your Raspberry Pi, with full PWM speed control. It uses a dedicated PWM driver chip over I2C, so only two pins (SDA/SCL) are needed...
Delivered by Fri 12 Jun
Adafruit LTC4311 I2C Extender / Active Terminator - STEMMA QT / Qwiic
SKU: AF-4756 | Brand: Adafruit
The Adafruit LTC4311 Active Terminator solves a common I2C problem: running long cables. Standard I2C is designed for short PCB-level connections, but cable capacitance and resistance degrade signals over distance. Th...
Delivered by Fri 12 Jun
JST SH 4-Pin Cable - Qwiic Compatible - 100mm Long
SKU: AF-4210 | Brand: Adafruit
This 4-wire cable is a little over 100mm / 4" long and fitted with JST-SH female 4-pin connectors on both ends. Compared with the chunkier JST-PH these are 1mm pitch instead of 2mm, but still have a nice latching f...
Delivered by Fri 12 Jun
Adafruit MCP23017 I2C GPIO Expander Breakout
SKU: AF-5346 | Brand: Adafruit
The Adafruit MCP23017 I2C GPIO Expander Breakout adds 16 extra GPIO pins to any microcontroller or microcomputer over I2C. Each pin can be configured as a digital output (driving up to 25 mA — perfect for LEDs) or as ...
Delivered by Fri 12 Jun
Adafruit Feather M4 Express - Featuring ATSAMD51 - ATSAMD51 Cortex M4
SKU: AF-3857 | Brand: Adafruit
The Feather M4 Express is built around the ATSAMD51J19, a 120 MHz Cortex M4 processor with hardware floating point and DSP instructions, 512 KB flash, and 192 KB RAM. It ships with CircuitPython pre-loaded — plug it i...
Delivered by Fri 12 Jun
ADS1115 16-Bit ADC - 4 Channel with Programmable Gain Amplifier
SKU: AF-1085 | Brand: Adafruit
Add precision analog-to-digital conversion to any microcontroller with the ADS1115 breakout. This 16-bit ADC delivers 860 samples per second over I2C, with four single-ended or two differential input channels and a bu...
Delivered by Thu 2 Jul
Adafruit 16-Channel 12-bit PWM/Servo Driver - I2C interface [PCA9685]
SKU: AF-815 | Brand: Adafruit
The Adafruit 16-Channel PWM/Servo Driver uses the PCA9685 chip to provide 16 channels of 12-bit PWM output over I2C. With a built-in clock, the driver runs independently — no need to continuously send signals from you...
Delivered by Thu 2 Jul
Adafruit ESP32-C6 Feather - STEMMA QT
SKU: AF-5933 | Brand: Adafruit
The Adafruit ESP32-C6 Feather is built around Espressif's first Wi-Fi 6 SoC, combining 2.4 GHz Wi-Fi 6, Bluetooth 5 (LE), and 802.15.4 (Zigbee/Thread) in a single chip. The addition of 802.15.4 support makes it well-s...
Delivered by Fri 12 Jun
Adafruit 16-Channel PWM / Servo Bonnet for Raspberry Pi
SKU: AF-3416 | Brand: Adafruit
The Adafruit 16-Channel PWM/Servo Bonnet adds precision servo and PWM control to your Raspberry Pi. Using the PCA9685 I2C PWM controller, it drives up to 16 servos or PWM outputs simultaneously with 12-bit resolution ...
Delivered by Fri 12 Jun
Adafruit Assembled Data Logging shield for Arduino
SKU: AF-1141 | Brand: Adafruit
The Adafruit Data Logging Shield makes it easy to save sensor data to an SD card with accurate timestamps. It combines an SD card interface with a real-time clock (RTC) and a prototyping area on an Arduino-compatible ...
Delivered by Fri 12 Jun
Adafruit RP2040 Prop-Maker Feather with I2S Audio Amplifier
SKU: AF-5768 | Brand: Adafruit
The Adafruit RP2040 Prop-Maker Feather is an all-in-one board designed for building props, cosplay pieces, lightsabers, animatronics, and interactive toys. It combines the RP2040 microcontroller with a prop-making too...
Delivered by Fri 12 Jun
Adafruit Sensirion SHT41 Temperature & Humidity Sensor
SKU: AF-5776 | Brand: Adafruit
The Adafruit Sensirion SHT41 is a high-accuracy temperature and humidity sensor with a true I2C interface, part of Sensirion's fourth-generation SHT4x family. Compared to the SHT40, the SHT41 offers significantly bett...
Delivered by Thu 2 Jul
Adafruit ESP32 Feather V2 - 8MB Flash + 2 MB PSRAM
SKU: AF-5400 | Brand: Adafruit
The Adafruit ESP32 Feather V2 is a major redesign of the original HUZZAH32 ESP32 Feather, featuring 8 MB flash, 2 MB PSRAM, USB-C, a STEMMA QT port, a NeoPixel, and a user button. The dual-core ESP32 at 240 MHz provid...
Delivered by Fri 12 Jun
Adafruit CYBERDECK Bonnet for Raspberry Pi 400
SKU: AF-4862 | Brand: Adafruit
The Adafruit CYBERDECK Bonnet is a GPIO extender for the Raspberry Pi 400 that lets you plug any Pi bonnet, mini-HAT, or pHAT into the back of the Pi 400 at an angled position. It duplicates every GPIO pin from input ...
Delivered by Fri 12 Jun
Adafruit VL53L4CD Time of Flight Distance Sensor - ~1 to 1300mm
SKU: AF-5396 | Brand: Adafruit
The Adafruit VL53L4CD is a Time-of-Flight (ToF) distance sensor from ST that combines short-range and medium-range sensing in one chip. It measures from approximately 1 mm right up to 1300 mm, bridging the gap between...
Delivered by Thu 2 Jul
Adafruit DS3231 Precision RTC - STEMMA QT
SKU: AF-5188 | Brand: Adafruit
The Adafruit DS3231 Precision RTC with STEMMA QT connectors is a highly accurate I2C real-time clock featuring an integrated temperature-compensated crystal oscillator (TCXO). Unlike standard RTCs that rely on an exte...
Delivered by Fri 12 Jun
Compare your options
All buying guides
The Teacher's Guide to micro:bit Robots: Kits, Buggies, and Robotics Compared
Compare micro:bit-compatible robot kits, buggies, and robotics platforms by age range, assembly difficulty, sensors, and curriculum fit — for classrooms, clubs, and home learners across Australia.
49 products compared
The Maker's Guide to Servos: Torque, Speed, and Control Compared
Compare hobby and industrial servos by torque, rotation range, and control type (PWM, digital, continuous) to pick the right motor for robotics, animatronics, and RC projects.
16 products compared
Title The Maker's Guide to ADCs: Resolution, Speed, and Interface Compared
Compare analogue-to-digital converters by bit depth, sample rate, and bus (I²C vs SPI) to pick the right chip for your Arduino, Raspberry Pi, or microcontroller project.
16 products compared
