Adafruit

SKU: AF-2633 | Brand: Adafruit

The Adafruit Bluefruit LE SPI Friend adds Bluetooth Low Energy connectivity to any microcontroller with just 4–5 GPIO pins. Using SPI instead of UART means no baud rate configuration or flow control to worry about — c...

SKU: AF-164 | Brand: Adafruit

The Sharp GP2Y0A21YK0F is an infrared distance sensor that measures distances from 10 cm to 80 cm by bouncing IR light off objects. It outputs an analogue voltage proportional to distance — approximately 3 V at 10 cm ...

SKU: AF-3251 | Brand: Adafruit

The Adafruit Si7021 is a temperature and humidity sensor from Silicon Labs with a PTFE filter for protection against dust and contaminants. It provides ±3% relative humidity accuracy over 0–80% RH and ±0.4 °C temperat...

SKU: AF-1899 | Brand: Adafruit

The Adafruit HTU21D-F is an accurate I²C digital temperature and humidity sensor breakout board. With typical humidity accuracy of ±2% (optimised for 5–95% RH) and temperature accuracy of ±1°C across -30 to 90°C, it's...

SKU: AF-1947 | Brand: Adafruit

The 2.8" TFT Touch Shield with Capacitive Touch plugs directly into an Arduino and provides a bright, full-colour display with a smooth glass capacitive touchscreen and onboard MicroSD card socket. Fully assembled and...

SKU: AF-2088 | Brand: Adafruit

The Adafruit 1.44" Colour TFT LCD Display Breakout is a compact 128×128 pixel screen driven by the ST7735R controller over 4-wire SPI. Unlike older CSTN displays, this is a true TFT with full 16-bit colour and fast re...

SKU: AF-3502 | Brand: Adafruit

The Adafruit SHARP Memory Display Breakout features a 1.3" 168×144 monochrome LCD that combines the ultra-low power consumption of e-paper with the fast refresh rates of a traditional LCD. The display shows crisp blac...

SKU: AF-2090 | Brand: Adafruit

The 2.8" TFT LCD Breakout Board features a bright, full-colour display with a capacitive single-touch touchscreen and an onboard MicroSD card socket. With 240×320 resolution and individual RGB pixel control, it delive...

SKU: AF-5832 | Brand: Adafruit

This breakout brings the INA228 power monitoring chip out to an easy-to-use board for measuring DC current, bus voltage and calculated power on either the high side or the low side of a circuit. It combines a wide com...

SKU: AF-5892 | Brand: Adafruit

This breakout makes it much easier to use the tiny MAX4544 SPDT analogue switch in prototypes and one-off builds. It gives you a solid-state alternative to a relay for switching between two analogue signal paths, with...

SKU: AF-5800 | Brand: Adafruit

Built for larger TTL-interface TFTs, this development board makes it much easier to experiment with 40-pin RGB-666 displays using an ESP32-S3. It is aimed at panels that go beyond the usual SPI-driven sizes and resolu...

SKU: AF-6359 | Brand: Adafruit

This breakout lets you add an ideal diode to a higher-current DC power path without the usual forward voltage drop of a standard diode. It is designed for 3~23V DC supplies and up to 5A, using the LM73100's back-to-ba...

SKU: AF-5807 | Brand: Adafruit

This breakout is built around the HUSB238 USB PD sink chip, making it easy to negotiate power from a USB Type-C Power Delivery source without soldering tiny resistors. It plugs into a USB-C cable and uses the CC lines...

SKU: AF-2217 | Brand: Adafruit

The Adafruit Audio FX Sound Board with 2×2W Amp is a standalone audio trigger with a built-in stereo Class D amplifier — no Arduino or programming required. Simply drag and drop WAV or OGG sound files over USB, wire u...

SKU: AF-4816 | Brand: Adafruit

The BMP390 from Bosch (also known as BMP390L) is a high-precision barometric pressure and temperature sensor, offering the best altitude accuracy in the Bosch pressure sensor lineup. With relative accuracy of ±3 Pasca...

SKU: AF-3787 | Brand: Adafruit

The Adafruit 1.54" TFT LCD is a compact, high-density display featuring a 240×240 pixel IPS panel driven by the ST7789 chipset. With 220 PPI and wide viewing angles up to 80° in any direction, this display delivers vi...

SKU: AF-2264 | Brand: Adafruit

The Adafruit FT232H Breakout turns your computer into a versatile interface for hardware protocols. Using the FTDI FT232H chip with its multi-protocol synchronous serial engine, you can communicate directly with I2C, ...

SKU: AF-3013 | Brand: Adafruit

The Adafruit DS3231 Precision RTC is a highly accurate I2C real-time clock breakout with an integrated temperature-compensated crystal oscillator (TCXO). Unlike standard RTCs that rely on an external 32 kHz crystal, t...

SKU: AF-5957 | Brand: Adafruit

The Adafruit DVI Sock is a compact DVI/HDMI output board designed to solder directly onto the end of a Raspberry Pi Pico or Pico W like a little PCB sock. Using the RP2040's PIO system, it enables your Pico to drive a...

SKU: AF-5989 | Brand: Adafruit

The Adafruit HDC3021 is a high-precision I²C temperature and humidity sensor breakout featuring the TI HDC302x series chip. With typical humidity accuracy of ±0.5% RH (and just 0.19% long-term drift) and temperature a...