Adafruit

SKU: AF-2633 | Brand: Adafruit

The Adafruit Bluefruit LE SPI Friend adds Bluetooth Low Energy connectivity to any microcontroller with just 4–5 GPIO pins. Using SPI instead of UART means no baud rate configuration or flow control to worry about — c...

SKU: AF-164 | Brand: Adafruit

The Sharp GP2Y0A21YK0F is an infrared distance sensor that measures distances from 10 cm to 80 cm by bouncing IR light off objects. It outputs an analogue voltage proportional to distance — approximately 3 V at 10 cm ...

SKU: AF-3251 | Brand: Adafruit

The Adafruit Si7021 is a temperature and humidity sensor from Silicon Labs with a PTFE filter for protection against dust and contaminants. It provides ±3% relative humidity accuracy over 0–80% RH and ±0.4 °C temperat...

SKU: AF-1899 | Brand: Adafruit

The Adafruit HTU21D-F is an accurate I²C digital temperature and humidity sensor breakout board. With typical humidity accuracy of ±2% (optimised for 5–95% RH) and temperature accuracy of ±1°C across -30 to 90°C, it's...

SKU: AF-5832 | Brand: Adafruit

This breakout brings the INA228 power monitoring chip out to an easy-to-use board for measuring DC current, bus voltage and calculated power on either the high side or the low side of a circuit. It combines a wide com...

SKU: AF-5633 | Brand: Adafruit

This breakout makes it much easier to prototype with external QSPI flash memory on modern microcontrollers such as the RP2040, ESP32, RT10xx and STM32 families. It adapts a wide 8-SOIC flash package to a neat 0.3" wid...

SKU: AF-5892 | Brand: Adafruit

This breakout makes it much easier to use the tiny MAX4544 SPDT analogue switch in prototypes and one-off builds. It gives you a solid-state alternative to a relay for switching between two analogue signal paths, with...

SKU: AF-6359 | Brand: Adafruit

This breakout lets you add an ideal diode to a higher-current DC power path without the usual forward voltage drop of a standard diode. It is designed for 3~23V DC supplies and up to 5A, using the LM73100's back-to-ba...

SKU: AF-5807 | Brand: Adafruit

This breakout is built around the HUSB238 USB PD sink chip, making it easy to negotiate power from a USB Type-C Power Delivery source without soldering tiny resistors. It plugs into a USB-C cable and uses the CC lines...

SKU: AF-2167 | Brand: Adafruit

Infrared (IR) break-beam sensors are a simple way to detect motion. They work by having an emitter side that sends out a beam of human-invisible IR light, then a receiver across the way which is sensitive to tha...

SKU: AF-5708 | Brand: Adafruit

The Adafruit CAN Pal is a CAN bus transceiver breakout for microcontrollers that have a native CAN peripheral. It converts 3.3V logic-level CAN TX/RX signals to the differential signalling required for the CAN bus. Th...

SKU: AF-4816 | Brand: Adafruit

The BMP390 from Bosch (also known as BMP390L) is a high-precision barometric pressure and temperature sensor, offering the best altitude accuracy in the Bosch pressure sensor lineup. With relative accuracy of ±3 Pasca...

SKU: AF-3013 | Brand: Adafruit

The Adafruit DS3231 Precision RTC is a highly accurate I2C real-time clock breakout with an integrated temperature-compensated crystal oscillator (TCXO). Unlike standard RTCs that rely on an external 32 kHz crystal, t...

SKU: AF-5957 | Brand: Adafruit

The Adafruit DVI Sock is a compact DVI/HDMI output board designed to solder directly onto the end of a Raspberry Pi Pico or Pico W like a little PCB sock. Using the RP2040's PIO system, it enables your Pico to drive a...

SKU: AF-5989 | Brand: Adafruit

The Adafruit HDC3021 is a high-precision I²C temperature and humidity sensor breakout featuring the TI HDC302x series chip. With typical humidity accuracy of ±0.5% RH (and just 0.19% long-term drift) and temperature a...

SKU: AF-6178 | Brand: Adafruit

The Adafruit 1.28" Round TFT LCD Display is a circular 240×240 IPS screen at 220 PPI, driven by the GC9A01A controller over SPI. Its beveled edges give it a sleek, watch-like appearance, making it ideal for wearables,...

SKU: AF-6038 | Brand: Adafruit

The Adafruit SPI Flash SD Card breakout features an XTSD 2 GB chip — an SD card in an SMT package that you can wire up like standard SPI flash but use with existing SD card libraries. It comes pre-formatted as a 2 GB ...

SKU: AF-5987 | Brand: Adafruit

The Adafruit RS232 Pal provides two duplex channels of UART-to-RS-232 level shifting in a compact breakout board. Built around the trusted TI MAX3232E, it handles the positive and negative voltage generation internall...

SKU: AF-5939 | Brand: Adafruit

The Adafruit Infrared IR Remote Receiver is a sensitive, wide-range 38 kHz IR receiver board with two selectable sensor orientations — one vertical and one horizontal. A slide switch lets you choose which sensor to re...

SKU: AF-4072 | Brand: Adafruit

The Adafruit RFM69HCW Transceiver Radio Bonnet @ 868/915 MHz adds sub-GHz packet radio to your Raspberry Pi. Plug it onto the GPIO header and communicate with remote sensor nodes over distances of up to 500 m (line of...