Adafruit

SKU: AF-270 | Brand: Adafruit

A Type-K thermocouple with fiberglass braid insulation, rated to 500°C — far beyond the ~200°C limit of standard vinyl-insulated thermocouples. The bare bead probe design is suited to measuring both air and surface te...

SKU: AF-285 | Brand: Adafruit

This weatherproof RGB LED flexi-strip features 30 LEDs per metre on a white PCB backing with a silicone weatherproof coating and 3M adhesive on the reverse. The entire strip is controlled as one unit — drive the R, G,...

SKU: AF-297 | Brand: Adafruit

Need some really bright LEDs? We are big fans of these clear red LEDs, in fact we use them exclusively in our kits. They are very bright and have about 20degree LED beam. They go easily into a breadboard and will add ...

SKU: AF-3118 | Brand: Adafruit

Make your own custom HDMI cable or HDMI interface with ease, using this HDMI Terminal Block Breakout. You get a nice solid PCB with an HDMI plug and two strips of terminal blocks that you can use with stranded or s...

SKU: AF-3123 | Brand: Adafruit

The DE-9 (DB-9) Male Plug to Terminal Block Breakout makes it easy to create custom DE-9 cables or interfaces without soldering a connector. A solid PCB breaks out all nine pins of the DE-9 plug to screw terminal bloc...

SKU: AF-3176 | Brand: Adafruit

The Feather M0 RFM69HCW Packet Radio (868/915 MHz) combines the ATSAMD21G18 ARM Cortex M0+ processor with an SX1231-based RFM69HCW radio transceiver for wireless data communication at 868 or 915 MHz. The exact radio f...

SKU: AF-16 | Brand: Adafruit

A blank metal tin in the classic Altoids gum size — perfect for housing small electronics projects. Custom-made with a flattened bottom (instead of rounded) so components sit flush inside. Ideal for building portable ...

SKU: AF-3201 | Brand: Adafruit

Wireless is wonderful, but sometimes you need the strong reliability of a wired connection. The Ethernet FeatherWing adds quick and easy wired Internet to any Feather board — just plug in a standard Ethernet cable and...

SKU: AF-381 | Brand: Adafruit

This is a pre-wired and waterproofed version of the DS18B20 sensor. Handy for when you need to measure something far away, or in wet conditions. While the sensor is good up to 125°C the cable is jacketed in PVC ...

SKU: AF-364 | Brand: Adafruit

The PN532 is the most popular NFC chip, and is what is embedded in pretty much every phone or device that does NFC. It can pretty much do it all, such as read and write to tags and cards, communicate with phones (s...

SKU: AF-394 | Brand: Adafruit

Pogo pins are little spring-loaded contacts, very handy for making jigs, or making momentary (but electrically solid) contacts. We use them by the dozen for making programming and testing jigs but they're handy also i...

SKU: AF-3218 | Brand: Adafruit

Fire up your engines because these are the hot-rods of toggle switches! Equipped with an aerodynamic red protective casing, and a red LED at the tip of the switch, this Red LED Toggle Switch is sure&nbs...

SKU: AF-2590 | Brand: Adafruit

The Adafruit Metro Mini 328 packs the same ATmega328P power as a full-sized Metro into a tiny breadboard-friendly form factor. Running at 16 MHz with 5V logic, it's pin-compatible with Arduino UNO R3 and works with th...

SKU: AF-3316 | Brand: Adafruit

The Adafruit VL6180X is a close-range Time-of-Flight (ToF) distance sensor from ST that measures from approximately 5 mm to 100 mm (up to 150–200 mm in good conditions). It also includes a built-in ambient light senso...

SKU: AF-3318 | Brand: Adafruit

Check out this handy USB extension cable, which will make it easy for you to enclose a device that has a Mini-B USB type port. We think this would be most handy when putting a Teensy, FTDI friend, USB LiPo charger, Be...

SKU: AF-2926 | Brand: Adafruit

The Terminal Block Breakout FeatherWing kit is like the Golden Eagle of prototyping FeatherWings (eg. majestic, powerful, good-looking). To start, you get a nice prototyping area underneath your Feather, wi...

SKU: AF-616 | Brand: Adafruit

Give yourself some more room with an EL wire cable extender. This cable has a 2-pin JST SM plug on one end and receptacle on the other. Use it to extend the reach of EL wire, panel, tape, etc. The cable is a meter ...

SKU: AF-1935 | Brand: Adafruit

That's one tiny microphone! At about the size of a mature aphid, this wired Electret Microphone is perfect for your FONA. This microphone's very similar to our PCB-mount Elecret Microphone but is significantly sma...

SKU: AF-812 | Brand: Adafruit

Design a clock, timer or counter into your next project using our pretty 4-digit seven-segment display. These bright crisp displays are good for adding numeric output. Besides the four 7-segments, there are decimal...

SKU: AF-824 | Brand: Adafruit

Handy for making wire harnesses or jumpering between headers on PCB's. These premium jumper wires are 12" (300mm) long and come in a 'strip' of 40 (4 pieces of each of ten rainbow colors). They have 0.1" male he...