Adafruit

SKU: AF-2652 | Brand: Adafruit

Measure indoor environmental conditions with Bosch’s BME280 sensor on an easy-to-use Adafruit breakout. It combines temperature, barometric pressure and humidity sensing in a compact board that suits weather stations,...

SKU: AF-290 | Brand: Adafruit

Perfect for bread-boarding, free wiring, etc. This spool of solid-core wire is easy to solder to. When bent it keeps its shape pretty well. We like to have a few spools of this stuff around. We suggest picking up wire...

SKU: AF-5699 | Brand: Adafruit

The Raspberry Pi Debug Probe is an all-in-one USB-to-debug kit that provides all the necessary hardware and cables for easy, solderless, plug-and-play debugging. For when "printf-style-debugging" just isn't enough,...

SKU: AF-4401 | Brand: Adafruit

This 4-wire cable is a little over 200mm / 7.8" long and fitted with JST-SH female 4-pin connectors on both ends. Compared with the chunkier JST-PH these are 1mm pitch instead of 2mm, but still have a nice latching fe...

SKU: AF-3857 | Brand: Adafruit

The Feather M4 Express is built around the ATSAMD51J19, a 120 MHz Cortex M4 processor with hardware floating point and DSP instructions, 512 KB flash, and 192 KB RAM. It ships with CircuitPython pre-loaded — plug it i...

SKU: AF-1186 | Brand: Adafruit

OMG WATCH OUT! This 100mm diameter arcade button with a 16mm deep plastic base is so massive and inviting it may collapse upon itself and form a black hole from which not even light can escape! Until it does, howev...

SKU: AF-64 | Brand: Adafruit

This is a cute half size breadboard, good for small projects. It's 2.2" x 3.4" (5.5 cm x 8.5 cm) with a standard double-strip in the middle and two power rails on both sides. You can pull the power rails off easily to...

SKU: AF-1950 | Brand: Adafruit

Premium female-to-female jumper wires in a convenient 20-pin ribbon cable, perfect for making wire harnesses or jumpering between headers on PCBs. Each wire is 150mm (6") long with 0.1" (2.54mm) female header contacts...

SKU: AF-1956 | Brand: Adafruit

A pack of 20 premium male-to-male jumper wires in a convenient ribbon cable format. Each wire is 75 mm (3") long with 0.1" (2.54 mm) male header contacts on both ends, fitting cleanly onto standard-pitch headers. The...

SKU: AF-5039 | Brand: Adafruit

A 10-pack of two-part relegendable plastic keycaps compatible with Cherry MX and MX-compatible switches. Each keycap consists of an off-white base and a clear snap-on cover — simply remove the cover, insert a custom l...

SKU: AF-1187 | Brand: Adafruit

OMG WATCH OUT! This 100mm diameter arcade button with a 10mm deep plastic base is so massive and inviting it may collapse upon itself and form a black hole from which not even light can escape! Until it does, howe...

SKU: AF-1713 | Brand: Adafruit

Add an ear to your project with this well-designed electret microphone amplifier with AGC. This fully assembled and tested board comes with a 20-20KHz electret microphone soldered on. For the amplification, we use th...

SKU: AF-1463 | Brand: Adafruit

Round and round they go! 16 ultra-bright smart RGB NeoPixels are arranged in a circle with a 44.5 mm (1.75″) outer diameter. Each LED is individually addressable from a single microcontroller pin, delivering 24-bit co...

SKU: AF-413 | Brand: Adafruit

Solenoids are basically electromagnets: they are made of a big coil of copper wire with an armature (a slug of metal) in the middle. When the coil is energized, the slug is pulled into the center of the coil. This mak...

SKU: AF-746 | Brand: Adafruit

The Adafruit Ultimate GPS Breakout (Version 3) is a high-performance GPS module built around the MTK3339 chipset. With 66 channels, -165 dBm tracking sensitivity, and up to 10 Hz position updates, it delivers accurate...

SKU: AF-5113 | Brand: Adafruit

Kailh Choc Low Profile Red linear mechanical key switches in a pack of 10. These ultra-low-profile switches are significantly thinner than standard MX-style switches, making them ideal for slim custom keyboards and co...

SKU: AF-4890 | Brand: Adafruit

Need to measure something with a very slim sensor? This precision 10K thermistor is an inexpensive way to measure temperature in a small gap, or taped to a flat surface, it's only 0.2mm wide!The resistance in 25°C is ...

SKU: AF-3960 | Brand: Adafruit

With our fun assortment of conductive materials, cosplay and wearables have never been easier to craft!  This Conductive Nylon tape goes great with our other interesting materials, such as copper tape, ITO gl...

SKU: AF-2226 | Brand: Adafruit

Be the belle of the ball with the NeoPixel Jewel!  We fit seven of our tiny 5050 (5mm x 5mm) smart RGB LEDs onto a beautiful, round PCB with mounting holes and a chainable design to create what we think...

SKU: AF-1475 | Brand: Adafruit

The Raspberry Pi has an on-board audio jack, which is super handy for all kinds of sound effects and speech, just plug and go! However, for when you want better audio for music playback, a USB audio card can greatly i...