Adafruit

SKU: AF-4600 | Brand: Adafruit

The Adafruit QT Py SAMD21 is the original QT Py — a tiny development board built around the ATSAMD21E18 (ARM Cortex-M0+ at 48 MHz) with native USB, a STEMMA QT connector, and an RGB NeoPixel. It's the same chip found ...

SKU: AF-4888 | Brand: Adafruit

The Adafruit ItsyBitsy RP2040 brings the Raspberry Pi RP2040 to the compact ItsyBitsy form factor. Featuring a dual-core Cortex M0+ running at 125 MHz, 264 KB RAM, and 8 MB of SPI Flash, it packs serious power into a ...

SKU: AF-5022 | Brand: Adafruit

The Adafruit Proximity Trinkey is a tiny USB-A development board built around the APDS9960 multi-function sensor and an ATSAMD21 microcontroller. Plug it into any USB port and you instantly have proximity, colour, amb...

SKU: AF-4907 | Brand: Adafruit

A pack of 10 USB-C jack connectors designed for power-only applications. These sturdy metal connectors feature four through-hole mounting tabs that make them extremely difficult to rip off a PCB. They also work in SMT...

SKU: AF-4763 | Brand: Adafruit

These little chips are like miniature SSD drives for your electronics. When you don't need something with as much storage as a micro SD card, but an EEPROM is too small, SPI (or QSPI) Flash chips give you on-the-order...

SKU: AF-4482 | Brand: Adafruit

These premium male-male jumper wires are handy for making wire harnesses or jumpering between headers on PCBs. They're 200mm (~7.8") long and come loose as a pack of 40 (10 pieces of red, blue, yellow, and Adafruit bl...

SKU: AF-2598 | Brand: Adafruit

The Adafruit Feather M0 WiFi combines an ATSAMD21G18 ARM Cortex M0+ processor with an ATWINC1500 WiFi module for an all-in-one Arduino-compatible development board with built-in USB, battery charging, and 802.11b/g/n ...

SKU: AF-4341 | Brand: Adafruit

A premium anodised aluminium enclosure for the Raspberry Pi 4 with completely silent passive cooling. The solid aluminium body acts as a heatsink for the main processor, keeping the Pi cool without any fans or moving ...

SKU: AF-4413 | Brand: Adafruit

The Adafruit LSM303AGR combines a triple-axis accelerometer and triple-axis magnetometer in a single breakout board. The accelerometer measures gravity to determine which way is down, while the magnetometer senses mag...

SKU: AF-4364 | Brand: Adafruit

Just about all electronics use a UART serial port with RX and TX pins for debugging, bootloading, programming, serial output, etc. But it's rare for a computer to have a serial port anymore. Thus, a serial cable is an...

SKU: AF-4311 | Brand: Adafruit

A vibrant 2.0" IPS TFT display breakout with 320×240 resolution and full-colour output, driven by the ST7789 controller. The IPS panel delivers vivid colour reproduction and wide viewing angles — a significant upgrade...

SKU: AF-4211 | Brand: Adafruit

If you need to add a panel-mount connection for USB Mini B, but don't have the time or tools to cut a custom oval or square hole, this Round Panel Mount Plug is the easiest and fastest way to panel-ify your project. I...

SKU: AF-2821 | Brand: Adafruit

The Feather HUZZAH ESP8266 is an all-in-one Wi-Fi development board with built-in USB and battery charging. Powered by the ESP8266 with a full Wi-Fi stack, it's a compact and affordable way to add Internet connectivit...

SKU: AF-2782 | Brand: Adafruit

A pack of 25 through-hole 2.2 kΩ carbon film resistors. These standard axial-type resistors feature 0.4 mm leads that plug cleanly into solderless breadboards, making them perfect for prototyping, kits, and permanent ...

SKU: AF-2363 | Brand: Adafruit

This clear polycarbonate base is designed for the Raspberry Pi Model A+. It's part of a modular snap-on case system — pair it with a separately available lid in your choice of colour to create a custom combination. D...

SKU: AF-2362 | Brand: Adafruit

Now that we have The Single Greatest Raspberry Pi Model A+ Case Ever - we decided to make it even better by adding COLORS!!!!!  Mix and match snap-on lids and bases to form your favorite combinations...

SKU: AF-2858 | Brand: Adafruit

Be the belle of the ball with the NeoPixel Jewel! These NeoPixel Jewels now have 4 LEDs in them (red, green, blue, and white) for excellent lighting effects. This is the Warm White RGBW version. We also ...

SKU: AF-3653 | Brand: Adafruit

Add WiFi connectivity to your Arduino-compatible board with the Adafruit WINC1500 WiFi Shield, featuring the FCC-certified ATWINC1500 module from Atmel. This 802.11b/g/n shield supports WEP, WPA, and WPA2 encryption w...

SKU: AF-1116 | Brand: Adafruit

Board edge mounting standoffs designed to grip standard 1.6 mm (0.062") thick PCBs by the edge or corner — no mounting holes required. An elegant solution for securing boards like the original Raspberry Pi or any PCB ...

SKU: AF-4042 | Brand: Adafruit

This LED Is super chonky! Bigger than your average LED, it has a big, bold, and beautiful diffused body that measures approximately 18mm diameter. Inside is nestled a bi-color red and green LED, just like you're famil...