Adafruit

SKU: AF-3928 | Brand: Adafruit

The Adafruit CRICKIT for micro:bit is a robotics and electronics driver board designed for the BBC micro:bit. Plug your micro:bit into the 40-pin edge connector and start controlling motors, servos, solenoids, NeoPixe...

SKU: AF-1467 | Brand: Adafruit

Get that heat sink stuck on good and strong with 3M's thermal tape. Specifically designed for attaching heat sinks to ICs. Works better and is less messy than thermal glues or pastes because the thickness is even acro...

SKU: AF-1515 | Brand: Adafruit

A 10-pack of ultra-low-profile aluminium heat sinks designed for surface-mount components such as SoCs, motor drivers, linear regulators, FETs, and other SMT packages. Their tiny footprint and minimal height make them...

SKU: AF-1598 | Brand: Adafruit

You take your soldering seriously, so you deserve a serious IC extractor tool. We purposefully never carried the cheap bent-sheet IC extractors, and if you've ever used one you know why. They should call them "IC try-...

SKU: AF-1606 | Brand: Adafruit

The Adafruit Perma-Proto Full-Sized Breadboard PCB mirrors the layout of a standard full-size solderless breadboard, making it simple to transfer prototyped circuits to a permanent soldered board. With 60 rows of 5-ho...

SKU: AF-1656 | Brand: Adafruit

3M Z-Axis Conductive Tape (9703) bonds two conductive surfaces together while allowing current to flow through the thickness of the tape — but not along its length or width. This anisotropic conductivity is achieved b...

SKU: AF-1732 | Brand: Adafruit

A high-power 4" (102mm) full-range speaker rated at 20W continuous with 4Ω impedance. The wide frequency response of 60Hz–24kHz delivers clear audio across the full spectrum, making it suitable for projects where you ...

SKU: AF-2057 | Brand: Adafruit

A slim, modern brushed aluminium potentiometer knob with a black anodised finish and a silver position indicator mark. Compact and understated, suitable for projects where a clean, professional look is needed. Specif...

SKU: AF-2056 | Brand: Adafruit

This is really the fanciest, best feeling knob we've ever seen. Using this knob sort of reminded us of driving along the Amalfi coast in a perfectly restored '65 Porsche - meaning we really, really liked ...

SKU: AF-2210 | Brand: Adafruit

The Adafruit Audio FX Sound Board with 2×2W Amp is a standalone audio trigger with a built-in stereo Class D amplifier — no Arduino or programming required. Simply drag and drop WAV or OGG sound files over USB, wire u...

SKU: AF-2340 | Brand: Adafruit

The Adafruit Capacitive Touch HAT adds 12 capacitive touch sensors to your Raspberry Pi using the MPR121 touch controller over I2C. Each sensor has a figure-8 hole designed for alligator clip connections — attach clip...

SKU: AF-2471 | Brand: Adafruit

The Adafruit HUZZAH ESP8266 Breakout is a breadboard-friendly WiFi microcontroller board built around the Espressif ESP8266. With an 80 MHz processor, full WiFi client and access point support, a built-in TCP/IP stack...

SKU: AF-1500 | Brand: Adafruit

The Adafruit Trinket 3V3 is a tiny microcontroller board built around the Atmel ATtiny85 processor. At just 27mm × 15mm, it's small enough to fit into virtually any project and affordable enough to dedicate to a singl...

SKU: AF-2700 | Brand: Adafruit

Need some really bright LEDs? We are big fans of these clear yellow LEDs, in fact we use them exclusively in our kits. They are very bright! They go easily into a breadboard and will add that extra zing to your p...

SKU: AF-2790 | Brand: Adafruit

A 3.5 mm (1/8") stereo (TRS) audio plug with screw terminal connections — no soldering required. Use stranded or solid-core wire and a small screwdriver to create custom audio cables, breakouts, and test leads. This ...

SKU: AF-2883 | Brand: Adafruit

The Adafruit Pi Protector for Raspberry Pi Zero is a minimal, crystal-clear acrylic protector that keeps your pocket-sized Pi Zero safe without adding bulk. Just two acrylic pieces secured with four screws — sleek, li...

SKU: AF-2772 | Brand: Adafruit

The Feather M0 Basic Proto is the no-frills member of the Feather M0 family, built around the ATSAMD21G18 ARM Cortex M0 processor with a built-in prototyping area for soldering on extra components. With 256KB of flash...

SKU: AF-2928 | Brand: Adafruit

The 8-Channel PWM or Servo FeatherWing adds 8 channels of 12-bit PWM output to any Adafruit Feather board via I2C. It uses an onboard PWM driver with a built-in clock, so it runs independently without tying up your mi...

SKU: AF-2915 | Brand: Adafruit

A 3.5 mm (1/8") 4-pole TRRS audio jack with screw terminal connections — no soldering required. Use stranded or solid-core wire and a small screwdriver to create custom audio wiring jigs, breakouts, and test setups. ...

SKU: AF-3028 | Brand: Adafruit

A Feather board without ambition is a Feather board without FeatherWings! This is the DS3231 Precision RTC FeatherWing: it adds an extremely accurate I2C-integrated Real Time Clock (RTC) with a Temperature Compensa...