Adafruit

SKU: AF-2166 | Brand: Adafruit

A low-dropout (LDO) 3.3 V linear voltage regulator based on the ST L4931 in a TO-92 package. With just 0.4 V dropout, it delivers a clean, regulated 3.3 V output from input voltages as low as 3.7 V — well suited for s...

SKU: AF-2430 | Brand: Adafruit

Pogo pins are little spring-loaded contacts, very handy for making jigs, or making momentary (but electrically solid) contacts. We use them by the dozen for making programming and testing jigs but they're handy also i...

SKU: AF-2927 | Brand: Adafruit

A Feather board without ambition is a Feather board without FeatherWings! This is the DC Motor + Stepper FeatherWing which will let you use 2 x bi-polar stepper motors or 4 x brushed DC motors (or 1 ...

SKU: AF-2914 | Brand: Adafruit

A 3.5 mm (1/8") 4-pole TRRS audio plug with screw terminal connections — no soldering required. Use stranded or solid-core wire and a small screwdriver to create custom audio cables, breakouts, and test leads. TRRS s...

SKU: AF-157 | Brand: Adafruit

IR sensor tuned to 38KHz, perfect for receiving commands from a TV remote control. Runs at 3V to 5V so it's great for any microcontroller.To use, connect pin 3 (all the way to the right) to 5V power, pin 2 (middle) to...

SKU: AF-344 | Brand: Adafruit

Heat shrink is the duct tape of electronics, it keeps your stuff all safe and kept together. Especially when wiring and soldering, use heat shrink to add mechanical strength to cables. We use this stuff all the time a...

SKU: AF-550 | Brand: Adafruit

Small self-adhesive rubber bumper feet for electronics boards and devices. Stick them to the bottom of any PCB to protect your desk, prevent sliding, and provide clearance for through-hole solder joints underneath. T...

SKU: AF-3346 | Brand: Adafruit

The Adafruit I2S 3W Stereo Speaker Bonnet adds high-quality digital audio output to any Raspberry Pi with a 2×20 GPIO header. Using the I2S digital sound standard, audio data goes directly to the onboard Class D ampli...

SKU: AF-1951 | Brand: Adafruit

These premium female-to-female jumper wires are ideal for making wire harnesses or connecting between headers on PCBs. Each pack contains 20 wires in a ribbon cable format — two of each of ten rainbow colours — that c...

SKU: AF-1953 | Brand: Adafruit

These Female/Male 'extension' jumper wires for making wire harnesses or jumpering between headers on PCB's. These premium jumper wires are 3" (75mm) long and come in a 'strip' of 20 (2 pieces of each of ten rainbow...

SKU: AF-3434 | Brand: Adafruit

Is there something missing from your tool kit or workstation? Are you having trouble figuring out which elusive tool it is that you're lacking? Perhaps it's a spudger! "A what?" A s-p-u-d-g-e-r!...

SKU: AF-3550 | Brand: Adafruit

If you love DIY cable-rigging, then these HDMI adapters are right up your alley! Making custom HDMI cables has never been easier. Just grab one of our HDMI ribbon cables, then swap and switch any of our HDMI a...

SKU: AF-3551 | Brand: Adafruit

If you love DIY cable-rigging, then these HDMI adapters are right up your alley! Making custom HDMI cables has never been easier. Just grab one of our HDMI ribbon cables, then swap and switch any of our HDM...

SKU: AF-3386 | Brand: Adafruit

The Adafruit PiRTC is a battery-backed real-time clock that plugs directly onto your Raspberry Pi's GPIO header, letting your Pi keep accurate time even when powered off. Built around the PCF8523 RTC with native Linux...

SKU: AF-6091 | Brand: Adafruit

The Adafruit bq25185 Charger is a versatile LiPo/LiIon/LiFePO4 charging board that supports USB, DC, and solar power input. It is an excellent upgrade from MCP73833 or MCP73831-based chargers, offering multi-chemistry...

SKU: AF-6056 | Brand: Adafruit

A snap-on silicone cover that protects the base and edges of your Raspberry Pi 5 from scratches, bumps, and surface contact. Lightweight and flexible, it adds a layer of protection without adding bulk or blocking acce...

SKU: AF-5764 | Brand: Adafruit

The Adafruit TRRS Jack Breakout Board provides easy access to all four contacts of a 3.5mm TRRS (Tip-Ring-Ring-Sleeve) audio jack — commonly used for stereo audio plus a microphone channel, as found on mobile phone he...

SKU: AF-5721 | Brand: Adafruit

We've lost count of how many times we've tried to mount a camera module onto a panel or enclosure but struggled to drill the very small M2 holes right at the edge of the camera board, and don't even mention trying to ...

SKU: AF-5705 | Brand: Adafruit

Witty Pi is an add-on board that adds real time clock and power management to your Raspberry Pi. It can define your Raspberry Pi’s ON/OFF sequence and significantly reduce energy use. Witty Pi 4 L3V7 is the new member...

SKU: AF-5617 | Brand: Adafruit

Snap action blocks are perfect when you have to quickly wire up a bunch of free-hanging components, and you don't want to solder. They're much easier to use than wire nuts, and of course, they are reuseable and do not...