All Products
Showing 41-51 of 51 products · 9 unavailable products hidden
6 x AA battery holder with 5.5mm/2.1mm plug
·
A 6×AA battery holder with a 5.5mm/2.1mm DC barrel plug, ready to power Arduino boards and other electronics with a standard DC jack. Use alkaline AAs for approximately 9V at 3000–4000mAh, or rechargeable NiMH cells for 7.2V at ~2000mAh. The 9V alkaline output is ideal for boards with a 5V volta...
5V 2A (2000mA) switching power supply - UL Listed
·
This FCC/CE certified and UL-listed switching power supply delivers a clean, regulated 5V DC output at up to 2A (2,000mA) via a standard 5.5×2.1mm DC barrel jack. It accepts 110–240V AC input and is suitable for powering LED strips, motors, and other current-hungry 5V devices. Key Features Out...
5V 4A (4000mA) switching power supply - UL Listed
·
This UL-listed switching power supply delivers a clean, regulated 5V DC output at up to 4A (4,000mA / 20W) via a standard 5.5×2.1mm centre-positive DC barrel jack. It accepts 110–240V AC input and is ideal for powering LED matrices, NeoPixel strips, and other high-current 5V projects. Key Featur...
2x3A DC Motor Driver Carrier Board for UNIHIKER M10
·
This DFRobot motor driver carrier board is purpose-built for the UNIHIKER M10, featuring a tilted edge connector slot that positions the screen at an optimal viewing angle. It integrates a dual 3 A DC motor driver with separate motor power, plus onboard RGB LEDs and infrared transmitter/receiver....
SIM7600G-H 4G HAT (B) for Raspberry Pi, LTE Cat-4 4G / 3G / 2G Support, GNSS Positioning, Global Band
4G HAT FOR RASPBERRY PI Enabling LTE Cat-4 4G / 3G / 2G Communication & GNSS Positioning Based on SIM7600G-H, Global Band Features At A Glance Connected via pogo pin or MicroUSB connector Dedicated pogo pin for Raspberry Pi Zero/Zero W MicroUSB connector for other Raspberry Pi boards or...
2.1mm 5VDC Barrel Jack to USB C Adapter
·
A simple adapter that converts a standard 2.1 mm DC barrel jack into a USB-C plug, letting you power USB-C devices from common 5 V barrel-jack wall adapters. Plug it onto the end of your existing power supply and connect straight to a Raspberry Pi 4 or any USB-C device that runs on 5 V without US...
2.1mm DC Barrel Jack to 1st Generation MagSafe Adapter
·
A passive adapter with a 1st-generation MagSafe plug on one end and a 5.5 mm / 2.1 mm DC barrel jack (centre-positive) on the other. It lets you connect a 15–20 VDC barrel-jack power supply to devices that use the original MagSafe connector — useful for bench testing, custom power setups, or repl...
5.5mm/2.1mm DC Barrel Polarity Reversing Cable
·
A 5.5×2.1mm DC barrel polarity reversing cable that swaps centre-negative to centre-positive (or vice versa). Simply plug it inline between your DC power supply and device to reverse the polarity — no rewiring required. This is useful for powering devices that use centre-negative barrel jacks (s...
Adafruit USB C Breakout Board - Downstream Connection
·
The Adafruit USB C Breakout Board (Downstream Connection) gives you easy access to all the pins on a USB Type-C connector, configured for downstream device use. Two 5.1K resistors on the CC1 pins signal the upstream host to provide 5V at up to 1.5A, mimicking classic USB 2.0 behaviour. For most ...
USB Micro-B Breakout Board
·
This breakout board gives you easy access to all 5 pins of a USB Micro-B connector via standard 0.1" header pins. It's a simple way to add USB 5V power to a project, interface with a USB-capable microcontroller, or prototype custom USB connections on a breadboard. The board uses a micro-AB conne...
USB-C Wall Adapter with Cable, US Plug, 6–12V
·
This USB wall adapter provides a compact mains power option for USB-powered devices, with an AC100-240V input range for use with suitable mains supplies.The adapter supports variable output ranges of 6V-6.5V/3A, 6.5V-9V/2A, and 9V-12V/1.5A. It is supplied with a USB to USB-C cable, helping it con...
