All Products

SKU: DF-KIT0131 · MPN: KIT0131

Build a DIY water quality monitor for field studies, teaching or environmental projects with the KnowFlow Basic Kit. This Arduino-based kit measures two key water parameters: pH and electrical conductivity (EC).Data can be recorded automatically to a micro-SD card for later analysis, and the Blun...

SKU: DF-DFR0305

The Romeo BLE is an all-in-one Arduino-compatible robot control board from DFRobot with integrated Bluetooth 4.0. It combines an ATmega328P microcontroller, a dual-channel DC motor driver (2 A max), and a TI CC2540 BLE chip in a single board — letting you build and wirelessly control robots witho...

SKU: TB-HM3194

A 12-way screw terminal strip rated at 6A and 250VAC. Can be divided into smaller sections with a sharp knife, making it easy to create custom-sized terminal blocks for any project. Each terminal block includes a mounting hole on a fixed pitch. Key Features 12-Way Configuration – Divisible int...

SKU: DF-SEN0232

The Gravity Analog Sound Level Meter is an Arduino-compatible decibel meter that accurately measures environmental noise levels. It uses an instrumentation-grade circuit with a low-noise microphone for high-precision readings across a 30–130 dBA range. The output voltage is linearly proportional...

SKU: DF-DFR0952

This compact DC-DC boost converter steps up input voltages from 2.5V to a selectable output of 5V, 8V, 9V, or 12V (default 12V) at over 80% conversion efficiency. Two solder pads (A and B) on the front of the module allow you to configure the output voltage — refer to the markings on the back of ...

SKU: DF-DFR0601

This is a dual channel DC motor driver with an extremely small size of of 1.97”×1.97”×0.49”. The module comes with two motor channels that can drive two motors simultaneously, and each channel employs an indicator to show the rotation direction of the motor: blue is forward rotation, red is rever...

SKU: DF-DFR0929

This industrial-grade 50W high-power step-down module offers a voltage input range of 9-18V and a maximum output of 5V/10A. It has the characteristics of high isolation withstand voltage of 1500V DC or 800V AC, low radiation interference, ripple noise, etc. With short-circuit protection and input...

SKU: PL-2739

The Pololu AltIMU-10 v5 is a compact inertial measurement unit (IMU) and altimeter that combines a gyroscope, accelerometer, magnetometer, and barometric pressure sensor on a single board. It provides ten independent measurements — pressure, 3-axis rotation, 3-axis acceleration, and 3-axis magnet...

SKU: DF-DFR1015

Multiple-output DC–DC converters are essential in a multitude of applications where different DC output voltages are required.This DC-DC step-down voltage power module converts 7.5V~30V input to an output of 3.3V/5V/9V/12V (default to 5V), which can be selected by short-circuiting the correspondi...

SKU: AF-4754 · MPN: 4754

The BNO085 from Hillcrest Laboratories is a 9-DOF IMU with built-in sensor fusion — it combines accelerometer, gyroscope and magnetometer data on-chip and delivers ready-to-use orientation, motion detection and activity classification outputs. No external sensor fusion algorithms needed. The BNO...

SKU: SF-ROB-29919 · MPN: ROB-29919

This configurable metal-geared servo can be used as a standard angular servo, a custom-limit angular servo, or a continuous-rotation actuator. It accepts conventional PWM input, so it can drop into many robotics builds while adding useful reconfiguration options when used with the optional REV SR...

SKU: LB-LS1307

This is the ESP32-CAM WiFi + Bluetooth Camera Module! It is designed be used for a wide range of IoT applications. For example, you could use it to build your own smart home device, set up a security monitoring system, and other IoT applications. It works by Bluetooth 4.2 standards and is...