All Products
Showing 21-40 of 50 products · 10 unavailable products hidden
10 x JST-PH 2-Pin SMT Right Angle Connector Black
A 10-pack of JST-PH 2-pin SMT right-angle connectors. This is the standard connector used on single-cell LiPo and Li-Ion batteries, making it essential for any battery-powered project. The right-angle orientation and surface-mount pins keep wiring neat and low-profile. Compatible with JST-PH 2-p...
JST-PH 2-Pin SMT Right Angle Connector
·
This JST PH 2-pin SMT right-angle connector is a surface-mount header designed to accept standard JST PH 2-pin plugs. It's commonly used as a battery connector on microcontroller boards, LiPo chargers, and small electronics — compatible with single-cell LiPo/Li-Ion battery leads, coin cell holder...
STEMMA Wired Potentiometer Breakout Board - 10K ohm Linear
·
For the easiest way possible to measure twists, turn to this STEMMA potentiometer breakout (ha!). This plug-n-play pot comes with a JST-PH 2mm connector and a matching JST PH 3-Pin to Male Header Cables - 200mm, so wiring up is a cinch. Simply plug the cable in, then use the black wire to c...
Mono Enclosed Speaker - 1W 8 Ohm
This compact enclosed mono speaker delivers clear audio at up to 1 W with 8 Ω impedance. The sealed enclosure provides better volume and sound quality compared to bare speaker drivers of a similar size, making it a practical choice for embedded audio projects, displays, and interactive installati...
JST-PH Male to JST-SM Male Adapter - 100mm
A short adapter cable with a JST-PH male connector on one end and a JST-SM male connector on the other. Use it to bridge between devices with different JST connector types, including EL wire and panel products. Key Features Connectors – JST-PH male to JST-SM male Length – 100mm Voltage Ratin...
JST PH 3-pin Plug-Plug Cable - 100mm long
·
A 100 mm (4″) cable fitted with JST-PH 3-pin connectors on both ends. The latching connectors provide a secure, compact connection that won't come apart easily. Colour-coded wiring makes hookup straightforward: red for power, black for ground, and white for signal. Designed to work with STEMMA b...
Adafruit CAN Bus BFF Add-On for QT Py
·
The Adafruit CAN Bus BFF is a compact add-on that brings CAN bus capabilities to any QT Py or Xiao board. Powered by the MCP26525 chipset with SPI interface, it provides better range and addressing than I2C, making it well suited for robotics and sensor networks. Drivers are available for both Ar...
Lithium Ion Polymer Battery with Short Cable - 3.7V 420mAh
·
A 3.7 V lithium-ion polymer (LiPo) battery with 420 mAh capacity (approximately 1.55 Wh). It features a short cable with a genuine 2-pin JST-PH connector that clicks smoothly into matching JST jacks without snagging. The battery includes built-in protection circuitry that guards against overchar...
Adafruit MOSFET Driver - For Motors, Solenoids, LEDs, etc
·
The Adafruit STEMMA MOSFET Driver makes it safe and simple to control motors, solenoids, high-power LEDs, and other current-hungry loads from any microcontroller. Instead of wiring up a transistor and flyback diode on a breadboard, this compact board has everything built in — just connect power, ...
Adafruit 2.13 Monochrome eInk / ePaper Display with SRAM - 250x122 Monochrome
·
Add a crisp, paper-like display to your microcontroller project with the Adafruit 2.13" Monochrome eInk Breakout. This 250×122 pixel black-and-white eInk panel delivers excellent daylight readability and retains its image even with power completely disconnected — just like printed paper. An onbo...
4Ω 6W Speaker
This compact enclosed speaker delivers clear audio output at up to 6W with a 4Ω impedance, suitable for a wide range of DIY audio and display projects. It comes with a JST PH 2-pin input cable for easy connection to amplifier boards and audio-capable development boards. Key Features Enclosed D...
EL Panel - Blue (10x10cm)
A flexible electroluminescent (EL) panel that emits a soft, neon-like blue glow when driven by an EL inverter. The 10 × 10 cm panel is thin and lightweight, making it ideal for backlighting, illuminated signage, costumes, and decorative projects. The panel connects via a 20 cm cable terminated w...
JST-PH Battery Extension Cable - 500mm
·
A 500 mm extension cable with a JST-PH 2-pin socket on one end and a matching plug on the other. The colour-coded wires make it easy to verify correct polarity. Compatible with JST-PH terminated battery packs including LiPo, Li-Ion, and AAA battery holders. Key Features JST-PH 2-Pin Connectors...
JST PH 4-pin Horizontal Connector (10-pack)
·
Designing boards with plug-n-play connectivity is a snap, with STEMMA connectors. Here's a pack of 10 of our favorite 2mm pitch connector - the JST PH 4 pin. These are the horizontal style. You can use these with any of our JST PH 4 / STEMMA cables. They're not STEMMA QT compatible (those...
micro:bit Battery Holder - 2xAAA (JST-PH)
This two-cell AAA battery holder is made for powering BBC micro:bit projects without needing to stay tethered to USB.The attached 6" (~150mm) lead is terminated with a JST-PH connector that mates with the JST socket on the micro:bit, making it simple to add portable power to your build.Note: JST ...
Adafruit MAX17048 LiPoly / LiIon Fuel Gauge and Battery Monitor
·
The Adafruit MAX17048 LiPoly/LiIon Fuel Gauge and Battery Monitor gives you accurate battery voltage and charge percentage readings for your 1S 3.7–4.2V lithium polymer or lithium ion battery. Instead of guessing remaining capacity from a non-linear voltage curve, this smart sensor does the maths...
Adafruit Infrared IR Remote Transceiver - STEMMA JST PH 2mm
·
The Adafruit Infrared IR Remote Transceiver combines a high-powered IR transmitter and a sensitive 38 kHz IR receiver on a single board. With two 940 nm IR LEDs (one vertical, one horizontal) driven by an onboard N-channel FET at 100–200 mA per LED, you get 10+ metres of transmit range alongside ...
GPIO Terminal Block Breakout Board Module for Raspberry Pi
This terminal block breakout module comes fully assembled and soldered, ready for use with Raspberry Pi boards.It is compatible with Raspberry Pi 1 Model B+, Pi 2 Model B, Pi 3 Model B, Pi 3 Model B+, Pi 4 Model B, Pi Zero, and Pi Zero W.The module features 2.54 mm (0.1″) pitch terminal blocks su...
Adafruit Proto Tripler PiCowbell for Pico and PicoW
·
The Adafruit Proto Tripler PiCowbell gives your Raspberry Pi Pico or Pico W three side-by-side socket slots — plug in your Pico and up to two PiCowbell accessories with no soldering or stacking headers required. It also includes LiPo battery charging, a power switch, reset button, STEMMA QT conne...
JST SH Compatible 1mm Pitch 3-pin - Plug-Plug Cable
·
If you fancy connecting to anything else with a JST SH compatible 3-pin connector, this cable will do the trick. For example, our NeoPixel JST Breakout boards, or UPDI Friend, or Sparkle Motion, or other boards we have with JST SH connectors on them for simple digital/analog IO. It has a 1mm pitc...
