All Products

SKU: AF-5203 · MPN: 5203

A simple 20-pin FFC/FPC extender that lets you connect two 20-pin 0.5mm pitch flat cables end-to-end, extending the total cable length. Ideal when the included cable on a display, camera, or sensor module is too short for your enclosure or project layout. Key Features 20-Pin 0.5mm Pitch – Matc...

SKU: SF-DEV-18440

The Arducam 5MP Plus OV5642 Mini is an SPI-enabled camera module designed for low-cost microcontrollers like Arduino and RP2040. With 5MP resolution and a generous 8MB frame buffer, it supports JPEG compression, multiple capture modes, and RAW/YUV/RGB output formats — all controllable via SPI for...

SKU: DF-KIT0155

The Sipeed Maix Bit is a compact AI development board powered by the Kendryte K210 dual-core RISC-V processor. Designed for edge AI and IoT applications, it features an onboard neural network accelerator capable of running face detection, image classification, and other machine learning tasks at ...

SKU: SF-BOB-28467 · MPN: BOB-28467

A simple breakout board that converts the 22-pin HSTX/camera/display connector to standard 0.1" through-hole pins. Perfect for prototyping and debugging when you need direct access to all the signals from your RP2350 or Raspberry Pi 5's high-speed interface. Includes a 22-pin flex cable for conn...

SKU: AF-4634 · MPN: 4634

Add motion, direction and orientation sensing to your project with this compact STEMMA QT version of the LSM9DS1 9-DOF sensor from Adafruit. The LSM9DS1 combines a 3-axis accelerometer, 3-axis magnetometer and 3-axis gyroscope into a single chip for full orientation tracking. This version featur...

SKU: DF-DFR0639

The Maix Bit is a compact AI development board powered by the Kendryte K210 dual-core RISC-V processor. With 8MB of on-chip SRAM (6MB general purpose + 2MB AI dedicated), a built-in neural network processor delivering hundreds of GOPS, and MicroPython support, it's a powerful and affordable platf...

SKU: AF-4407 · MPN: 4407

The Adafruit MLX90640 IR Thermal Camera Breakout features a 24×32 array of infrared thermal sensors that returns 768 individual temperature readings over I2C. It's an affordable way to add heat-vision to any microcontroller or Raspberry Pi project — like a miniature thermal camera you can integra...

SKU: AF-2264 · MPN: 2264

The Adafruit FT232H Breakout turns your computer into a versatile interface for hardware protocols. Using the FTDI FT232H chip with its multi-protocol synchronous serial engine, you can communicate directly with I2C, SPI, JTAG, and serial UART devices — plus read and write digital GPIO pins — all...

SKU: AF-3252 · MPN: 3252

The Adafruit Raspberry Pi Zero Case is a compact two-piece polycarbonate enclosure that protects your Pi Zero while keeping all ports accessible. Designed by Mike Doell, it features a sleek black base and clear top that snap together without screws. The case provides slim openings for mini HDMI,...

SKU: SF-KIT-15948

Do you see what we see? With the FLIR Radiometric Lepton® Dev Kit v2 you will be able to bring FLIR's thermal imaging reliability and power to your Arduino, Raspberry Pi, or any ARM based development tool all in an easy to access breadboard friendly package. This kit includes a breakout as well a...

SKU: AF-1897 · MPN: 1897

The Adafruit SPI Non-Volatile FRAM Breakout provides 64 Kbit (8 KBytes) of ferroelectric RAM (FRAM) storage over SPI. FRAM combines the non-volatile retention of flash with the instant read/write speed of SRAM — no page writes, no block erasing, and each byte can be written 10 trillion times with...

SKU: AF-3657 · MPN: 3657

The Adafruit ATSAMD09 Breakout with seesaw is a versatile I2C peripheral board built on the Adafruit seesaw framework. Seesaw is a near-universal converter that lets you add GPIO, ADC, PWM, and more to any I2C-capable microcontroller or single-board computer — all over a simple I2C connection. R...

SKU: SF-BOB-16912

The FLIR Lepton® Thermal Camera Breakout Board is an easy-to-interface evaluation board to quickly connect the FLIR Lepton camera module to common platforms like Raspberry Pi or custom hardware. It provides onboard power supplies, generated from 3 – 5.5V, and a master clock. Local power supplies,...

SKU: AF-2765 · MPN: 2765

The Mini 2-Axis Analog Thumbstick is a compact, self-centring joystick with a black rocker cap, similar in style to PSP joysticks. It provides smooth directional analogue input using two 10 kΩ potentiometers — one for the X-axis and one for the Y-axis. The voltage output follows the motion of th...

SKU: AF-2258 · MPN: 2258

The Adafruit Raspberry Pi B+ / Pi 2 / Pi 3 Case is a durable polycarbonate enclosure with a smoke-tinted base and clear top. Designed by Mike Doell, it offers a clean, professional look while keeping your Pi protected and fully accessible. The case features slim openings for all cables, a bevell...

SKU: WS-21797

OV9281-120 mono Camera for Raspberry Pi, Global Shutter, 1MPOV9281-120 mono camera1MP, Global Shutter, 110°FOV Compatible with Raspberry Pi series boardsDevice Support Raspberry Pi series Supports 4B / 3B+ / 3A+ / Zero / Zero 2 W, and CM3/3+/4 (extra adapter board required) S...

SKU: AF-2359 · MPN: 2359

The Adafruit Raspberry Pi A+ Case is a slim, durable polycarbonate enclosure designed specifically for the Raspberry Pi Model A+. With a smoke-tinted base and clear top, it offers a clean, professional look while keeping your Pi protected and accessible. Designed by Mike Doell, the case features...

SKU: AF-2143 · MPN: 2143

This cable will let you swap out the stock 150mm long flex cable from a Raspberry Pi Camera (either 'classic' or 'NoIR' type) or Raspberry Pi Display for a different size. Works great, just carefully open the connector on the Pi and slip this one in. This cable is 1 meter long. We have cables ...

SKU: AF-4718 · MPN: 4718

The Adafruit SPI Non-Volatile FRAM Breakout provides 2 Mbit (256 KBytes) of ferroelectric RAM (FRAM) storage over SPI. FRAM combines the non-volatile retention of flash with the instant read/write speed of SRAM — no page writes, no block erasing, and each byte can be written 10 trillion times wit...

SKU: AF-5893 · MPN: ADA5893

This compact USB serial UPDI programmer is made for programming modern ATtiny chips, including parts used on Adafruit seesaw boards such as the ATtiny816, ATtiny817 and ATtiny1616. It provides selectable 3V or 5V power and logic, along with handy status LEDs so you can see power and serial activi...