All Products
Showing 21-40 of 48 products · 12 unavailable products hidden
Adafruit NeoPXL8 Friend - 8 x Strands NeoPixel Level Shifter
·
Drive up to 8 strands of NeoPixels simultaneously with DMA — no more blocking your code to push pixel data. The NeoPXL8 Friend is a standalone level-shifting breakout board that converts 3.3 V logic to 5 V for 8 independent NeoPixel outputs, with a breadboard-friendly form factor that works with ...
Adafruit AirLift – ESP32 WiFi Co-Processor Breakout Board
·
Give any microcontroller WiFi connectivity with the Adafruit AirLift Breakout. This board uses an ESP32 as a WiFi co-processor, handling all the heavy lifting of network connections and TLS/SSL encryption so your main microcontroller can focus on your application logic. The ESP32 communicates ov...
Teensy 4.1 (Headers)
The Teensy 4.1 is the newest iteration of the astoundingly popular development platform that features an ARM Cortex-M7 processor at 600MHz, with a NXP iMXRT1062 chip, four times larger flash memory than the 4.0, and two new locations to optionally add more memory. The Teensy 4.1 is the same size ...
Teensy 4.0 (Headers)
Teensy 4.0 features an ARM Cortex-M7 processor at 600MHz, with a NXP iMXRT1062 chip, the fastest microcontroller available today. Teensy 4.0 is the same size and shape as Teensy 3.2, and retains compatibility with most of the pin functions on Teensy 3.2. The best part of this version of Teensy 4....
Adafruit QT Py CH32V203 Dev Board with STEMMA QT
·
The Adafruit QT Py CH32V203 is a tiny development board built around the WCH CH32V203G6 — a low-cost RISC-V microcontroller running at up to 144 MHz. In the compact QT Py form factor (Seeed Xiao compatible), it packs USB-C, a STEMMA QT connector, an RGB NeoPixel, and 10 GPIO pins into a board sma...
Adafruit 4x4 Trellis Feather Acrylic Enclosure + Hardware Kit
·
This laser-cut acrylic enclosure kit turns your 4×4 NeoTrellis setup into a handheld device with an elegant black and white design and beautifully diffused button illumination. Designed to house any Adafruit Feather board (except FONA) alongside the NeoTrellis RGB Driver PCB. The enclosure inclu...
UPS HAT for Raspberry Pi Zero
DFRobot UPS HAT is an uninterruptable power supply shield designed for the Raspberry Pi Zero series, and also compatible with Pi 2/3/A+. The UPS HAT can continue to provide power to the Raspberry Pi for a certain period of time when the system is powered off, by which to avoid system damage and a...
DreamMaker Overlord 3D Printer Mainboard V1.0
·
This control board is designed for the DreamMaker Overlord 3D Printer, acting as the central controller for analysing sensor data and driving the actuators needed to complete the printing process.It is based on the Arduino Mega2560, providing plenty of GPIO resources for structure and motion-cont...
Adafruit MLX90640 IR Thermal Camera Breakout - 55 Degree
·
The Adafruit MLX90640 IR Thermal Camera Breakout features a 24×32 array of infrared thermal sensors that returns 768 individual temperature readings over I2C. It's an affordable way to add heat-vision to any microcontroller or Raspberry Pi project — like a miniature thermal camera you can integra...
Adafruit AirLift Bitsy Add-On – ESP32 WiFi Co-Processor
·
Give your ItsyBitsy project WiFi connectivity with the Adafruit AirLift Bitsy Add-On. This compact daughterboard uses an ESP32 as a WiFi co-processor, handling all the heavy lifting of network connections and TLS/SSL encryption so your main microcontroller can focus on your application logic. Th...
Small Black T-Bar Hall Effect Fader - 5V
·
You might recognize this interesting new component from behind-the-scenes studio clips of audio recording equipment or even music videos. A fader is a control device for fading or changing the sound volume, light intensity, or simply the gain on an audio or video signal.Here is a small, black han...
Adafruit 0.56 4-Digit 7-Segment Display w/I2C Backpack - Red
·
The Adafruit 0.56" 4-Digit 7-Segment Display with I2C Backpack in red makes it easy to add a bright numeric display to any microcontroller project. The backpack handles all LED multiplexing and driving via I2C, so you only need two data pins to control a full 4-digit display. The HT16K33 driver ...
Adafruit LSM6DSOX 6 DoF Accelerometer and Gyroscope - STEMMA QT / Qwiic
·
The Adafruit LSM6DSOX is a high-quality 6 Degree of Freedom (6-DoF) IMU from ST, combining a triple-axis accelerometer and triple-axis gyroscope on a single chip. Beyond basic motion sensing, it includes built-in tap detection, activity detection, a pedometer/step counter, and a programmable fini...
Adafruit PDM MEMS Microphone Breakout
·
The Adafruit PDM MEMS Microphone Breakout provides a digital audio input using Pulse Density Modulation (PDM) — a common interface in commercial products that's distinct from both analogue and I2S microphones. It's ideal for microcontrollers without analogue inputs, and most modern 32-bit process...
HackSpace Magazine Issue #25 - Maker Christmas - December 2019
·
HackSpace Magazine is the monthly magazine for the modern maker, published by Raspberry Pi Press. Issue #25 (December 2019) is the Maker Christmas edition, highlighting the best toys, tools, and trinkets for your hacker gift list. In This Issue DIY tutorial: Making sounds with NeoTrellis Linkin...
Adafruit AirLift Shield - ESP32 WiFi Co-Processor
·
Give your Arduino project WiFi connectivity with the Adafruit AirLift Shield. This shield uses an ESP32 as a WiFi co-processor, handling all the heavy lifting of network connections and TLS/SSL encryption so your main microcontroller can focus on your application logic. The ESP32 communicates ov...
Adafruit LED Sequins - Multicolor Pack of 5
·
Add a little sparkle to your wearable project with Adafruit LED Sequins. These tiny sewable LED boards are the simpler sibling of Flora NeoPixels — they display a single colour with no digital control needed, making them smaller and easier to use for many projects. Simply connect 3–6 VDC to the ...
Silver Anodized Aluminum Bumper Feet - Pack of 2
·
A pair of silver anodised aluminium bumper feet designed for electronics enclosures, keyboard cases, and DIY projects. Each foot features a black rubber insert for non-slip grip and a clean metallic finish that complements anodised aluminium housings. Mount using the included M4-threaded machine...
Black Anodized Aluminum Bumper Feet - Pack of 2
·
Sleek black anodized aluminum bumper feet with embedded rubber grips for no-slip support. Originally designed for keyboard enclosures, these machined aluminium feet look great on any electronics project, enclosure, or custom build. Each foot attaches with the included M4-threaded machine screw —...
Adafruit ISM330DHCX - 6 DoF IMU - Accelerometer and Gyroscope - STEMMA QT / Qwiic
·
The Adafruit ISM330DHCX is an industrial-quality 6-DoF IMU from ST, combining a 3-axis accelerometer and 3-axis gyroscope on a single silicon die for synchronised measurements. With an extended gyroscope range of ±4000°/s and an industrial temperature range of −40°C to +105°C, it delivers excepti...
