All Products
Showing 21-40 of 47 products · 13 unavailable products hidden
Adafruit FeatherWing 128x64 OLED Add-on
·
Add a crisp monochrome display and simple user controls to your Feather project with this fully assembled FeatherWing. It combines a 128x64 white OLED screen with three user buttons labelled A, B and C, plus a reset button, so you can build compact menus, status displays, and handheld interfaces ...
Adafruit eInk Feather Friend with 32KB SRAM
·
The Adafruit eInk Feather Friend is a FeatherWing-format driver board for eInk/e-paper displays with a standard 24-pin FPC connector. It includes all the power supply circuitry and level shifting needed to connect your favourite display (up to tri-colour 4.2") to any Feather board via SPI, plus a...
Adafruit 0.54 Quad Alphanumeric FeatherWing Display - Yellow
·
The Adafruit 0.54" Quad Alphanumeric FeatherWing Display in yellow adds a bright, easy-to-read 4-character 14-segment LED display to any Feather microcontroller. Each character can show full alphanumeric text (A–Z, 0–9) plus symbols, making it ideal for clocks, sensor readouts, status messages, a...
Adafruit 2.9 Tri-Color eInk / ePaper Display FeatherWing - Red Black White
·
Add a vibrant tri-colour eInk display to your Feather project with this 2.9" FeatherWing. The panel displays red, black, and white pixels at 296×128 resolution that remain visible even with power completely disconnected — just like printed paper, but with the added impact of colour. The FeatherW...
Adafruit Floppy FeatherWing with 34-Pin IDC Connector
The Adafruit Floppy FeatherWing lets you read and write 3.5-inch or 5.25-inch floppy disks using a Feather microcontroller. It connects to standard 34-pin IDC floppy drives and includes built-in level shifting between 3.3 V Feather logic and the 5 V signals that floppy drives require. Floppy dri...
Adafruit LSM6DSOX + LIS3MDL FeatherWing - Precision 9-DoF IMU
·
The Adafruit LSM6DSOX + LIS3MDL FeatherWing is a precision 9 Degree of Freedom (9-DoF) IMU add-on for any Feather board. It combines the LSM6DSOX accelerometer/gyroscope — known for its exceptionally low gyro drift and noise — with the LIS3MDL magnetometer for complete orientation and heading sen...
Adafruit 0.54 Quad Alphanumeric FeatherWing Display - White
·
The Adafruit 0.54" Quad Alphanumeric FeatherWing Display in white adds a bright, easy-to-read 4-character 14-segment LED display to any Feather microcontroller. Each character can show full alphanumeric text (A–Z, 0–9) plus symbols, making it ideal for clocks, sensor readouts, status messages, an...
Adafruit 14-Segment Alphanumeric LED FeatherWing
·
The Adafruit 14-Segment Alphanumeric LED FeatherWing adds a bright 4-digit alphanumeric display to any Feather board. The 0.56" 14-segment LEDs can display the full alphabet, numbers, and punctuation — readable from up to 7 metres away. An onboard HT16K33 matrix driver handles all the LED multip...
Adafruit 8x16 LED Matrix FeatherWing w/o Matrices
·
Create a compact 8×16 LED matrix display for any Feather board with this FeatherWing driver. The HT16K33 I2C driver handles all multiplexing for two 0.8" mini 8×8 LED matrices (128 LEDs total), controlled over just two I2C pins. Works with any Adafruit Feather board. The FeatherWing is perfect f...
Adafruit Prop-Maker Starter Kit - Make your own Lightsaber!
·
The Adafruit Prop-Maker Starter Kit contains the electronics you need to build a 3D-printed NeoPixel lightsaber with motion-activated lighting and full sound effects. The kit pairs the Feather M4 Express with the Prop-Maker FeatherWing, giving you an accelerometer for swing and hit detection, a C...
Adafruit Ultimate GPS FeatherWing
·
The Adafruit Ultimate GPS FeatherWing brings precise, low-power GPS to the Feather ecosystem. Built around the MTK3339 chipset, it tracks up to 22 satellites on 66 channels with -165 dBm sensitivity and delivers up to 10 position updates per second — all while drawing only 20 mA. Simply plug the...
Adafruit 15x7 CharliePlex LED Matrix Display FeatherWing - Green
·
The Adafruit 15×7 CharliePlex LED Matrix FeatherWing in Green adds a bright, compact 105-LED grid to any Feather board. The onboard IS31FL3731 driver handles all the charlieplexing over I2C, with 8-bit (256-level) PWM dimming on every individual LED — no complex wiring needed. The driver chip in...
Snap-on Enclosure for Adafruit Feather RP2040 DVI
·
A custom-designed snap-on enclosure for the Adafruit Feather RP2040 with DVI Output Port. 3D printed using an SLA process in translucent milky white plastic, it provides a clean, protective case with no visible layer lines or surface imperfections. No screws or glue required — simply snap the Fe...
Adafruit AMG8833 IR Thermal Camera FeatherWing
·
Add heat-vision to any Feather board with the Adafruit AMG8833 Thermal Camera FeatherWing. This sensor from Panasonic contains an 8×8 array of infrared thermal sensors that returns 64 individual temperature readings over I2C — like a compact thermal camera in FeatherWing form factor. The AMG8833...
Adafruit AirLift FeatherWing – ESP32 WiFi Co-Processor
·
Give your Feather project WiFi connectivity with the Adafruit AirLift FeatherWing. This add-on uses an ESP32 as a WiFi co-processor, handling all the heavy lifting of network connections and TLS/SSL encryption so your main Feather can focus on your application logic. The ESP32 communicates over ...
Adafruit CAN Bus FeatherWing - MCP2515
The Adafruit CAN Bus FeatherWing adds CAN bus networking to any Feather board. It uses the MCP2515 CAN controller and TJA1051/3 transceiver to send and receive messages in standard or extended format at up to 1 Mbps over a two-wire differential bus. Only an SPI port and two pins (chip-select and ...
SMT Socket Header Kit for FeatherWings
·
These two SMT Socket Headers alone are, well, lonely. But pair them with any of our Feather boards and you're in business! These headers are particularly cute and slim and are designed to match with FeatherWings. It's harder to solder than thru-hole type headers...
Adafruit LoRa Radio FeatherWing - RFM95W 900 MHz
·
Add long-range LoRa radio to any Feather board with the Adafruit LoRa Radio FeatherWing. Built around the SX127x LoRa module, this add-on provides kilometre-range packet radio communication at 900 MHz (tuneable to 868 MHz or 915 MHz) — perfect for sensor networks, remote monitoring, and bridging ...
Adafruit FeatherWing OLED - 128x64 OLED Add-on For Feather - STEMMA QT / Qwiic
·
The Adafruit FeatherWing OLED 128x64 adds a crisp 1.3-inch monochrome OLED display and three tactile user buttons (A, B, C) to any Feather board. The 128×64 white OLED pixel array is self-emissive — no backlight needed — delivering high contrast and excellent readability in a compact form factor....
Adafruit LoRa Radio FeatherWing - RFM95W 433 MHz
·
Add long-range LoRa radio to any Feather board with the Adafruit LoRa Radio FeatherWing. Built around the SX127x LoRa module, this add-on provides kilometre-range packet radio communication at 433 MHz — perfect for sensor networks, remote monitoring, and bridging to the Internet via a WiFi or cel...
