All Products
Showing 21-40 of 53 products · 7 unavailable products hidden
EYESPI Cable - 18 Pin 100mm long Flex PCB (FPC) A-B type
·
Connect this to that when a 18-pin FPC connector is needed. This 25 cm long cable is made of a flexible PCB. It's A-B style which means that pin one on one side will match with pin one on the other side. How handy! We're stocking this to fit with our EYESPI-compatible boards but you could of cou...
Board to Board Double Slot Female Connector - 50 pin, 0.5mm
These are the surface mount 50 pin 0.5mm Board to Board Double Slot Female Connectors found on the Alchitry FPGA boards. These headers allow for Alchitry FPGA Boards to stack on one another by being soldered to the topside of the board.These connectors are sold in single units. Four of these conn...
22-Pin 0.5mm Pitch FPC Cable - 20cm - SparkFun Electronics
·
A 22-pin flexible flat cable (FPC) with 0.5mm pitch, 20cm in length. This A-B style cable has matching pin orientation on both ends – pin 1 on one side aligns with pin 1 on the other – making it straightforward to connect cameras, displays, and other peripherals. The flexible design allows for e...
FPC Camera Connector - 24-Pin, 0.5mm (Bottom-Contact)
Amphenol FCI FFC/FPC Flexible Circuit Connectors are a broad range of innovative connector solutions to terminate FFC/FPC. This 24-Pin FPC connector has a 0.5mm pitch and comes with a bottom contact in a right angle orientation and a surface mount termination. This connector has a current rating ...
PCIe Flex Cable for NVMe Base and Raspberry Pi 5 – PCIe Pipe
·
A PCIe flex cable (PCIe Pipe) for connecting the Pimoroni NVMe Base to a Raspberry Pi 5. The cable features a keyed design with 16 pads at the Raspberry Pi 5 end and 18 pins at the NVMe Base end, preventing incorrect installation. Key Features Keyed Connector – One-way design prevents incorrec...
Adafruit CSI or DSI Cable Extender Thingy for Raspberry Pi
·
The Adafruit CSI/DSI Cable Extender Thingy lets you connect two 15-pin 1.0mm pitch flex cables end-to-end, extending the cable length for your Raspberry Pi Camera (CSI) or Display (DSI) connection. It handles all the pin rearranging automatically — just snap in two cables and go. Key Features ...
Raspberry Pi 5 FPC Camera Cable - 22-pin 0.5mm to 15-pin 1mm
·
This 500mm long camera cable is specifically designed to work with the Raspberry Pi 5 series. Just plug it into your Pi 5's camera port and then the other end into one of the official Pi Cameras for photo and video joy. Raspberry Pi 5 provides two four-lane MIPI connectors, each of which can supp...
40-Pin 0.5mm FPC Connector - SMD, Dual-Sided Contacts
·
This 40-pin surface-mount FPC (Flat Printed Circuit) connector is a compact board-level connector for flexible flat cables and display tails. Its contacts are arranged so the cable can be inserted with the contacts facing either up or down, giving you more flexibility when laying out or assemblin...
SparkFun GNSS Flex pHAT - LG290P - SparkFun Electronics
·
Achieve robust, centimetre-level RTK positioning in challenging RF environments with the SparkFun LG290P GNSS Flex pHAT. This all-in-one development board combines a versatile pHAT carrier with the powerful Quectel LG290P module, featuring advanced anti-jamming technology ideal for navigation in ...
40-pin FPC to Right Angle 2x20 IDC Male Plug Header Adapter
·
A 40-pin FPC to right-angle 2×20 IDC male plug header adapter board. Converts a standard 40-pin 0.5mm pitch FPC/FFC cable connection into a male GPIO plug, allowing you to connect HATs and Bonnets at a distance from your Raspberry Pi via a slim, flexible cable. Insert the male plug into your HAT...
40-pin 0.5mm pitch FPC Flex Cable with A-B Connections - 25cm long
·
A 25cm flexible flat cable (FFC) with 40 pins at 0.5mm pitch and Type A-B connections (contacts on opposite sides at each end). Designed for use with 40-pin FPC-to-IDC adapter PCBs to extend Raspberry Pi GPIO connections or other 40-pin ribbon cable applications. Pair this cable with compatible ...
Raspberry Pi M.2 HAT+
·
The Raspberry Pi M.2 HAT+ facilitates the connection of M.2 peripherals like NVMe drives and AI accelerators to the Raspberry Pi 5 through its PCIe 2.0 interface, offering quick data transfers up to 500 MB/s. This adapter board features a 16-pin, 0.5mm-pitch FPC connector which is linked to ...
Gravity: 4Pin I2C/UART Sensor Cable for Arduino - 50cm (10 Pack)
The Gravity 4Pin I2C/UART sensor cable is a standard Gravity series 4-Pin cable with 50cm length. One side is PH2.0-4p connector and the other side is XH2.54 DuPont port, compatible with standard breadboard pin pitch for convenient DIY connection.Besides, the cable uses color code design to disti...
40-pin FPC Extension Board + 200mm Cable
·
A 40-pin FPC extension board with an included 200mm flexible flat cable. Adds approximately 22cm of reach (20cm cable plus 2cm board) to devices using 40-pin, 0.5mm pitch FPC/FFC connections such as TFT displays. The board features two 40-pin flex connectors (both bottom-contact type), allowing ...
Raspberry Pi 5 Camera Cable - 300mm
This is a 300mm camera cable for use with MIPI displays and the Raspberry Pi 5. The Raspberry Pi 5 provides two four-lane MIPI connectors, each of which can support either a camera or a display. These connectors use the same 22-way, 0.5mm-pitch “mini” FPC format as the Compute Module Development ...
Raspberry Pi 5 Camera Cable - 500mm
This is a 500mm camera cable for use with MIPI displays and the Raspberry Pi 5. The Raspberry Pi 5 provides two four-lane MIPI connectors, each of which can support either a camera or a display. These connectors use the same 22-way, 0.5mm-pitch “mini” FPC format as the Compute Module Development ...
40-pin FPC to Right Angle 2x20 IDC Female Socket Header
·
A 40-pin FPC to right-angle 2×20 IDC female socket header adapter board. Converts a standard 40-pin 0.5mm pitch FPC/FFC cable connection into a Raspberry Pi-compatible GPIO socket, allowing you to extend or relocate your Pi's GPIO header using a slim, flexible cable. Plug the female socket direc...
40-pin FPC to Straight 2x20 IDC Female Socket Header
·
A 40-pin FPC to straight 2×20 IDC female socket header adapter board. Converts a standard 40-pin 0.5mm pitch FPC/FFC cable connection into a Raspberry Pi-compatible GPIO socket, allowing you to extend or relocate your Pi's GPIO header using a slim, flexible cable. Plug the female socket directly...
40-pin FPC to Straight 2x20 IDC Male Plug Header
·
A 40-pin FPC to straight 2×20 IDC male plug header adapter board. Converts a standard 40-pin 0.5mm pitch FPC/FFC cable connection into a male GPIO plug, allowing you to connect HATs and Bonnets at a distance from your Raspberry Pi via a slim, flexible cable. Insert the male plug into your HAT or...
30PIN 15CM FPC Cable for LattePanda Alpha Delta eDP Display
A 30-pin FPC cable designed specifically for connecting the LattePanda Alpha and Delta single-board computers to their 7-inch eDP display. The ultra-thin, flexible design with interference shielding ensures reliable video signal transmission in compact builds. Key Features LattePanda Compatibl...
