All Products

SKU: AF-5599 · MPN: 5599

What's better than a single LED? Lots of LEDs! A fun way to make a small display is to use an 8x8 matrix or a 4-digit 7-segment display. Matrices like these are 'multiplexed' - so to control all the seven-segment LEDs you need 14 pins. That's a lot of pins, and there are driver chips like the MAX...

SKU: EL-CQA23809TK

A nostalgic DIY soldering kit that brings the 90s electronic pet experience to life on an ESP8266 platform. Built around a Wemos D1 Mini and an SSD1306 OLED screen (128 × 64 pixels), your digital pet can eat, sleep, and poop — just like the original, but with way more pixels. The kit includes al...

SKU: AF-1982 · MPN: 1982

The Adafruit MPR121 Capacitive Touch Sensor Breakout provides 12 channels of capacitive touch sensing over I2C. The MPR121 handles all the capacitive filtering internally and can be configured for varying sensitivity levels, making it far easier to use than raw analog capacitive sensing. With fo...

SKU: AF-3232 · MPN: 3232

Add long-range LoRa radio to any Feather board with the Adafruit LoRa Radio FeatherWing. Built around the SX127x LoRa module, this add-on provides kilometre-range packet radio communication at 433 MHz — perfect for sensor networks, remote monitoring, and bridging to the Internet via a WiFi or cel...

SKU: AF-3231 · MPN: 3231

Add long-range LoRa radio to any Feather board with the Adafruit LoRa Radio FeatherWing. Built around the SX127x LoRa module, this add-on provides kilometre-range packet radio communication at 900 MHz (tuneable to 868 MHz or 915 MHz) — perfect for sensor networks, remote monitoring, and bridging ...

SKU: AF-3073 · MPN: 3073

The Adafruit RFM95W LoRa Radio Transceiver Breakout lets you send data over very long distances using the 433 MHz licence-free ISM band. Based on the SX1276 LoRa chipset, this breakout achieves ranges of approximately 2 km line of sight with a simple wire antenna — or up to 20 km with directional...

SKU: AF-3072 · MPN: 3072

The Adafruit RFM95W LoRa Radio Transceiver Breakout lets you send data over very long distances using the 868 or 915 MHz licence-free ISM bands. Based on the SX1276 LoRa chipset, this breakout achieves ranges of approximately 2 km line of sight with a simple wire antenna — or up to 20 km with dir...

SKU: AF-2837 · MPN: 2837

A mid-density RGBW NeoPixel strip with 60 individually addressable LEDs per metre on a flexible black PCB. Each pixel contains four LED elements — red, green, blue, and a dedicated white — providing 32-bit colour control and superior white output compared to RGB-only strips. Also available at 30 ...

SKU: AF-2824 · MPN: 2824

An RGBW NeoPixel strip with 30 individually addressable LEDs per metre on a flexible black PCB. Each pixel contains four LED elements — red, green, blue, and a dedicated white — providing 32-bit colour control and superior white output compared to RGB-only strips. Also available at 144 LED/m dens...

SKU: AF-2832 · MPN: 2832

An RGBW NeoPixel strip with 30 individually addressable LEDs per metre on a flexible white PCB. Each pixel contains four LED elements — red, green, blue, and a dedicated white — providing 32-bit colour control and superior white output compared to RGB-only strips. Also available with a black PCB ...

SKU: DF-FIT0111

A classic 9V battery snap connector with bare wire leads, 15 cm in length. Pair it with a DC Barrel Jack Adapter – Male to power an Arduino directly from a 9V battery. Key Features Bare Wire Leads – Solder or connect directly to your project Cable Length – 15 cm Standard 9V Snap – Fits all s...

SKU: AF-1602 · MPN: 1602

Add lots of touch sensors to your next microcontroller project with this easy-to-use 8-channel capacitive touch sensor breakout board, starring the CAP1188. This chip can handle up to 8 individual touch pads, and has a very nice feature that makes it stand out for us: it will light up the 8 onboa...

SKU: PI-PPMB00130

The Amp:bit is the easiest way to connect a speaker or headphones to your BBC micro:bit. It plugs directly onto the edge connector and provides a 3.5mm headphone jack, solder pads for a speaker, and a volume control wheel — everything you need to add audio to your micro:bit projects. If you have...

SKU: AF-1374 · MPN: 1374

This breakout board is the simplest way to create a project with a single "momentary" capacitive touch sensor. No microcontroller is required here - just power with 1.8 to 5.5VDC and touch the pad to activate the sensor.When a capacitive load is detected (e.g. a person touches the sensor-pad area...

SKU: AF-1375 · MPN: 1375

This breakout board is the simplest way to create a project with a single "toggle" capacitive touch sensor. No microcontroller is required here - just power with 1.8 to 5.5VDC and touch the pad to activate the sensor.This sensor is a toggle output type: touch-on then touch-off. That means that...

SKU: AF-1362 · MPN: 1362

This breakout board is the simplest way to create a project with mutiple capacitive touch sensors. No microcontroller is required here - just power with 1.8 to 5.5VDC and connect up to 5 conductive pads to the 5 left-hand pins. When a capacitive load is detected (e.g. a person touches one of the ...

SKU: AF-1460-2552 · MPN: 2552

A versatile NeoPixel strip with 30 individually addressable RGB LEDs per metre on a flexible black PCB. Each pixel offers full 24-bit colour control with only a single data pin required. The lower pixel density makes this strip ideal for longer runs where tight spacing isn't needed. The strip is...

SKU: PR-PIM254

Turn your Pi into a Lilliputian ghetto blaster with Speaker pHAT!Speaker pHAT crams an I2S DAC and mono amplifier, a tiny 8Ω 2W speaker, and a 10 LED bar graph all onto one teeny little pHAT. It's the neatest way to add audio to you Pi project, and its beautiful artwork evokes an 80s boombox...

SKU: PR-PIM263

Turn your Pi into a Lilliputian ghetto blaster with Speaker pHAT!Speaker pHAT crams an I2S DAC and mono amplifier, a tiny 8Ω 2W speaker, and a 10 LED bar graph all onto one teeny little pHAT. It's the neatest way to add audio to you Pi project, and its beautiful artwork evokes an 80s boombox...

SKU: KI-5641

Take your micro:bit robotics builds to the next level with the Kitronik All-in-one Robotics Board. This all-in-one control solution lets the BBC micro:bit drive up to 4 motors (or 2 stepper motors) and 8 servos, making it the perfect foundation for a wide variety of robotics projects. The board ...