All Products
Showing 41-60 of 100 products
Adafruit Sparkle Motion with wFL External Antenna
·
The Adafruit Sparkle Motion with wFL External Antenna is the flagship WLED smart LED driver with support for an external Wi-Fi antenna via a wFL connector. It offers the same full feature set as the standard Sparkle Motion — dual power options, three level-shifted LED outputs, built-in audio and ...
![Adafruit Motor/Stepper/Servo Shield for Arduino v2 Kit [v2.3]](/rails/active_storage/representations/redirect/BAh7BkkiC19yYWlscwY6BkVUewdJIglkYXRhBjsAVGkCxwVJIghwdXIGOwBUSSIMYmxvYl9pZAY7AEY=--be53511e4bffcc386d14cc91e4d5fa7bc52d1658/BAh7BkkiC19yYWlscwY6BkVUewdJIglkYXRhBjsAVHsIOgtmb3JtYXQ6CXdlYnA6EnJlc2l6ZV90b19maXRbB2kCkAFpApABOgpzYXZlcnsHOgxxdWFsaXR5aVc6CnN0cmlwVEkiCHB1cgY7AFRJIg52YXJpYXRpb24GOwBG--f55be79df1f1b025f86d676a642df617e240cfbc/image_cffee67c-857a-46f6-8d7e-71857a2f29bb.jpg)
Adafruit Motor/Stepper/Servo Shield for Arduino v2 Kit [v2.3]
·
The Adafruit Motor/Stepper/Servo Shield v2.3 is the upgraded successor to the original Motor Shield, delivering higher current, lower voltage drop, and a fully I2C-based design that frees up your Arduino's PWM pins. Drive up to 4 DC motors or 2 stepper motors plus 2 hobby servos from a single sta...
40-pin TFT Friend - FPC Breakout with LED Backlight Driver
·
A labelled breakout board for 40-pin dot-clock TFT displays with an integrated LED backlight driver. Breaks out all 40 FPC pins to breadboard-friendly through-hole pads and includes a FAN5333-based boost converter for driving backlight LED strings up to 24V. The backlight driver defaults to 25mA...
Mosfetti 4 Channel MOSFET Driver Board by Monk Makes
The Mosfetti by Monk Makes is a compact 4-channel MOSFET switch designed for maker projects. Each channel can drive up to 2 A of low-side switching at up to 16 V DC, making it perfect for controlling relays, solenoids, LED strips, pumps, and motors from a microcontroller. Supplied as a PCB with ...
Electret Microphone Amplifier - MAX9814 with Auto Gain Control
·
Add an ear to your project with this well-designed electret microphone amplifier with AGC. This fully assembled and tested board comes with a 20-20KHz electret microphone soldered on. For the amplification, we use the Maxim MAX9814, a specialty chip that is designed for amplifying electret micro...
Adafruit eInk Breakout Friend with 32KB SRAM
·
The Adafruit eInk Breakout Friend is a driver board for eInk/e-paper displays with a standard 24-pin FPC connector. It includes all the power supply circuitry and level shifting needed to connect your favourite display (up to tri-colour 4.2") to any development board via SPI. Unlike basic breako...
3.7-inch 416x240 Monochrome eInk Bare Display
·
E-Ink and E-Paper panels are excellent for projects that need a low-power, daylight-readable display. The image remains visible even when power is disconnected, giving a high-contrast, paper-like result for static information, labels, dashboards and portable builds.This is a bare 3.7-inch monochr...
![Adafruit 24-Channel 12-bit PWM LED Driver - SPI Interface [TLC5947]](/rails/active_storage/representations/redirect/BAh7BkkiC19yYWlscwY6BkVUewdJIglkYXRhBjsAVGkC4mNJIghwdXIGOwBUSSIMYmxvYl9pZAY7AEY=--3a8e2819291faa87dd6453dd5a89de421761a727/BAh7BkkiC19yYWlscwY6BkVUewdJIglkYXRhBjsAVHsIOgtmb3JtYXQ6CXdlYnA6EnJlc2l6ZV90b19maXRbB2kCkAFpApABOgpzYXZlcnsHOgxxdWFsaXR5aVc6CnN0cmlwVEkiCHB1cgY7AFRJIg52YXJpYXRpb24GOwBG--f55be79df1f1b025f86d676a642df617e240cfbc/image_9e932e4e-0d27-4f29-8771-fda7e5c18b09.jpg)
Adafruit 24-Channel 12-bit PWM LED Driver - SPI Interface [TLC5947]
·
Control 24 channels of 12-bit PWM output with the Adafruit TLC5947 breakout board. Designed for LED control, this SPI-driven board delivers constant-current open-drain outputs that keep brightness consistent even if the power supply dips. The chainable design lets you connect as many boards as yo...
Adafruit HTS221 - Temperature & Humidity Sensor Breakout Board
·
The Adafruit HTS221 is an affordable I²C/SPI temperature and humidity sensor breakout board from ST. It measures relative humidity from 0–100% RH with 3.5% accuracy (in the 20–80% range) and temperature from -40 to 120°C with ±0.5°C accuracy (between 15 and 40°C). An excellent choice for everyday...
Adafruit HDC3021 Precision Temperature & Humidity Sensor
·
The Adafruit HDC3021 is a high-precision I²C temperature and humidity sensor breakout featuring the TI HDC302x series chip. With typical humidity accuracy of ±0.5% RH (and just 0.19% long-term drift) and temperature accuracy of ±0.1°C, it's one of the most accurate environmental sensors available...
1.54 240x240 Color IPS TFT Display
·
A 1.54-inch IPS TFT display with 240×240 resolution and 16-bit full-colour pixels. The IPS panel provides excellent colour accuracy up to 80° off axis in any direction, driven by the ST7789 controller over a 4-wire SPI interface. This is the bare display module only — no PCB or supporting circui...
Motor party add-on pack for Arduino
·
Make your own Arduino motor party with a motor shield and a fine assortment of motors! New! we've upgraded the shield to our new version 2, with more powerful drivers, and uses fewer pins to boot! Included in this add-on pack is: Adafruit Motor Shield v2 for Arduino 6 Volt DC hobby motor Smal...
2.13 Flexible Monochrome eInk / ePaper Display - 212x104 Monochrome
·
A flexible 2.13″ monochrome e-ink display with 212 × 104 pixel resolution, delivering crisp, paper-like visuals that remain visible even with no power applied. The high-contrast black-on-white image is excellent in direct sunlight and draws zero current when static. The flexible substrate allows...
2.13-inch 250x122 Quad-Colour eInk/ePaper Bare Display
·
This bare eInk/ePaper display element gives you a compact 2.13-inch electronic paper screen with quad-colour output: red, black, yellow and white. Like an e-reader display, it is high contrast, daylight readable, and can keep the last image visible even when power is completely disconnected.Pleas...
Adafruit LED Glasses Driver - nRF52840 Sensor Board
·
The Adafruit LED Glasses Driver is a slim, Bluetooth-enabled controller board built around the Nordic nRF52840 chipset. Originally designed to drive the Adafruit LED Glasses RGB LED matrix, it also works brilliantly as a compact standalone development board with built-in sensors and STEMMA QT con...
2.66-inch 296x152 Monochrome eInk/ePaper Bare Display
·
E-Ink and ePaper panels are ideal for low-power projects where you want a daylight-readable display that keeps showing its image even when power is removed. This bare 2.66 inch panel gives you a crisp, paper-like monochrome display for DIY eInk builds.This is the display element only, so it needs...
Adafruit 16x9 Charlieplexed PWM LED Matrix Driver - IS31FL3731
·
The Adafruit IS31FL3731 breakout is a charlieplexed PWM LED matrix driver that controls a 16×9 grid of individually dimmable LEDs over I2C. Each of the 144 LEDs can be set to any brightness level with 8-bit (256-level) PWM — no complex wiring or constant signal sending required. The IS31FL3731 o...
Adafruit AW9523 GPIO Expander and LED Driver Breakout - STEMMA QT / Qwiic
·
The Adafruit AW9523 GPIO Expander and LED Driver Breakout adds 16 I/O pins to any I2C-capable microcontroller or single-board computer. What sets this expander apart is its built-in 256-step linear constant-current LED dimming — connect LEDs directly without current-limiting resistors for smooth,...
Stepper motor - NEMA-17 size - 200 steps/rev, 12V 350mA
·
A stepper motor to satisfy all your robotics needs! This 4-wire bipolar stepper has 1.8° per step for smooth motion and a nice holding torque. The motor was specified to have a max current of 350mA so that it could be driven easily with an Adafruit motor shield for Arduino (or other motor driv...
Adafruit eInk Feather Friend with 32KB SRAM
·
The Adafruit eInk Feather Friend is a FeatherWing-format driver board for eInk/e-paper displays with a standard 24-pin FPC connector. It includes all the power supply circuitry and level shifting needed to connect your favourite display (up to tri-colour 4.2") to any Feather board via SPI, plus a...
