All Products

SKU: DF-FIT0793

A pack of four coreless micro motors measuring 7 × 16 mm, reaching 50,000 RPM at 3.7V. The largest in the coreless micro motor range, these deliver more torque (70 mA rated current) than the smaller variants, making them suitable for slightly heavier micro drone builds and small RC projects that ...

SKU: DF-FIT0887

A pack of two USB-A male to double alligator clip cables for supplying 5 V power from any USB port to breadboards, battery boards, and other devices without a dedicated power connector. Each cable has a red (+) and black (−) alligator clip on one end and a USB-A plug on the other. Key Features ...

SKU: YH-6000300204

A set of 10 alligator clip cables designed for the BBC micro:bit's edge connector pins. Each 35cm cable has clips sized to grip the micro:bit's 0, 1, 2, 3V, and GND pads, making it easy to connect external components without soldering or a breakout board. The pack includes two of each colour — b...

SKU: DF-FIT0796

A pack of four coreless micro motors sized 8.5×20mm, designed for DIY drone builds and lightweight RC projects. These high-speed motors deliver 46,000 RPM from a compact form factor, making them well-suited for quadcopter and multirotor applications. Each motor runs on 3.7V (single LiPo cell) an...

SKU: DF-FIT0992

This is an uninterruptible power supply (UPS) expansion board specifically designed for Raspberry Pi 5 Single Board Computer. It can be used as a mobile power supply, providing a stable 5V output with a maximum of 5A.Its enhanced power management system can intelligently monitor the power status ...

SKU: MM-SKU00073

The MonkMakes Servo for micro:bit board provides a really easy way to attach up to three servomotors to a BBC micro:bit. The board requires a power supply or battery pack to provide 5 or 6V to the servomotors. It includes a voltage regulator that will supply 3V back to the micro:bit, so that you ...

SKU: SF-PRT-09835

This is a simple 4 cell AA battery holder. The 5 inch cable is terminated with a standard 5.5x2.1mm, center positive barrel jack connector. The connector mates with the barrel jack on the Arduino (among a number of other products) allowing you to easily make your project battery powered. ...

SKU: WS-17693

Prohibited by the module manufacturer SIMCOM, we're not allowed to ship this product, or to provide any tech support, to the following countries/regions: Iran, North Korea, Cuba, Sudan, Syrian. NB-IoT/Cat-M(eMTC)/GNSS HAT for Raspberry Pi, Based on SIM7080G, Globally Applicable Overview  ...

SKU: WS-31327 · MPN: 30987

Cobra Flex Universal Modular Drive-by-Wire ChassisProduct Overview:Step into the future of robotics with the Cobra Flex Universal Modular Drive-by-Wire Chassis. Designed for adaptability and innovation, this 4WD compact differential chassis stands at the frontier of robotic development. Complete ...

SKU: AF-4431 · MPN: 4431

Little clicky switches are standard input "buttons" on electronic projects. These are just like our Colorful Round Tactile Button Switch Assortment, but already assembled onto a PCB - they even have a pull-up resistor installed! The pins are normally open (disconnected) and when the button is pre...

SKU: AF-2680 · MPN: 2680

OK you've signed up for Adafruit.io and you're ready to build something cool and Internet-connected. All you need is this starter kit which will get you going with lots of parts that go very well with our service and are the most common sensors and actuators you may want. Sense light, motion, ...

SKU: AF-724 · MPN: 724

Screw terminal blocks are the clean, maintainable solution for PCB-to-wire connections — no solder, no loose ends, easy to swap out later. These 3.5mm pitch 2-pin blocks are a practical size: wide enough for a range of wire gauges, compact enough not to dominate your board, and designed to snap t...

SKU: PI-COM0609

LEDs are a great addition to any project. Whether you need a power indicator, a set of status lights, or a whole array for something more decorative these little through hole LEDs are always useful.Sold in a variety of colours these 10mm LEDs come in packs of 5 and are great both for prototyping ...

SKU: PI-COM0607

A pack of five 10 mm red through-hole LEDs. These bright, easy-to-use LEDs are great for power indicators, status lights, decorative arrays, and general prototyping on breadboards or in finished projects. Key Features 10 mm Form Factor – Large, highly visible LED Red Colour – Classic indicato...

SKU: DF-FIT0682 · MPN: FIT0682

This 5cm 18-pin FPC flat flex ribbon cable is made for connecting compatible controller boards to GDI-enabled display modules. Its short length is suited to compact builds where you want a neat internal display connection with minimal cable clutter.The 0.5mm pitch helps align with standard 18-pin...

SKU: AF-3366 · MPN: 3366

Stacking headers combine a female socket on top with extended male pins on the bottom, allowing you to stack multiple PCBs on top of each other. Solder the long pins through a board, then plug another board's female headers onto the pins below while connecting yet another board into the sockets a...

SKU: AF-725 · MPN: 725

Nothing makes a project harder to maintain than a lot of loose wiring. That's why we like to use terminal blocks whenever making PCB-to-Wire connections. These particular 3.5mm terminal blocks are our favorite: big enough for a range of wire gauges, easy to adjust with a screwdriver, and not t...

SKU: AF-598 · MPN: 598

Female headers are one of the most versatile components in electronics — perfect for connecting things together, soldering to perfboards, creating sockets for wires, or pairing with break-away male header strips. This pack of five gives you plenty to work with. Each header is 36 pins long with s...

SKU: AF-3008 · MPN: 3008

Short female headers designed for tight spaces where standard-height headers won't fit. At just 5mm tall (compared to the standard 8mm), these low-profile headers are ideal for compact builds and slim assemblies. Each header strip is 36 pins long with standard 0.1" (2.54mm) pitch, compatible wit...

SKU: AF-2672 · MPN: 2672

These 2 mm pitch 25-pin female socket headers are perfect for connecting to modules and boards that use 2 mm pin spacing instead of the standard 2.54 mm (0.1″) pitch. Each pack includes five 25-pin strips that can be cut to your desired length with diagonal cutters. Gold-plated contacts ensure r...