All Products

SKU: DF-FIT0145

A waterproof DC-DC step-down/step-up converter that accepts 8–40V DC input and delivers a stable 12V output at up to 6A (72W). Ideal for powering embedded PCs, single-board computers, and robot electronics from a wide range of battery or power sources. Key Features Wide Input Range – 8–40V DC ...

SKU: DF-FIT0169

A waterproof DC-DC step-down (buck) converter that accepts 16–36V DC input and outputs a stable 9V at up to 5A (45W). The sealed, shockproof enclosure and 96% efficiency make it well suited for robotics, vehicles, and outdoor installations where reliable voltage regulation is needed. Key Feature...

SKU: DF-FIT0168

A waterproof DC-DC step-down converter that takes 11–35V DC input (compatible with 12V and 24V systems) and outputs a regulated 7.5V at up to 5A (38W). The sealed, shockproof enclosure and 96% efficiency make it well suited for robotics and outdoor applications. Key Features Wide Input Range –...

SKU: DF-FIT0170

The 120W DC-DC Converter steps down a 15–40V DC input to a stable 12V output at up to 10A, making it an ideal regulated supply for embedded PCs, robots, and 12V accessories powered from higher-voltage battery systems. Housed in a waterproof and shockproof aluminium case, this converter is well-s...

SKU: DF-SER0061

A high-torque coreless waterproof servo delivering up to 45 kg·cm of stall torque at 8.4V. The all-metal gear train and aluminium shell provide excellent durability, while IP67-rated waterproofing — achieved through laminated circuit boards, waterproof gaskets, and breathable composite sealing — ...

SKU: PI-IQA002

The IQaudIO Pi-DigiAMP+ is a HAT-compliant DAC and amplifier board for the Raspberry Pi, combining a high-quality 24-bit/192 kHz DAC with a 2×20W Class D stereo amplifier on a single board. Based on the Texas Instruments TAS5756m chipset, it delivers full-HD audio quality with no soldering requir...

SKU: DF-SER0062

A high-torque brushless waterproof servo delivering up to 45 kg·cm of stall torque at 8.4V. The all-metal gear train and aluminium shell provide exceptional durability, while IP67-rated waterproofing — achieved through laminated circuit boards, waterproof gaskets, and breathable composite sealing...

SKU: DF-SER0060

A high-torque digital servo with all-metal gears, an aluminium shell, and IP67 waterproof rating. Delivers up to 35 kg·cm of stall torque at 7V, making it suitable for demanding robotics applications, multi-joint mechanisms, and outdoor projects where water exposure is a concern. The MOS-driven ...

SKU: LB-LS6842

This compact audio solution pairs the MAX98357 I2S digital amplifier with a high-quality 3W 8Ω 3070 full-range speaker, delivering clear and powerful sound from any I2S-enabled microcontroller. The MAX98357 accepts digital audio directly over I2S and handles conversion and amplification internall...

SKU: LB-LR0281-1

This is our very own TrinityPixel product.....why the funny name....Maddy was in a silly mood! These are WS2812B 5050 RGB LED Strip 5M 60LEDS Waterproof strips of lights. There are 60 RGB LEDs per meter, and you can control each LED individually! Yes, that's right, this is the digitally-addres...

SKU: AF-744

This waterproof polarized 4-wire cable set provides a reliable, weather-resistant connection for outdoor electronics projects. The polarized connectors ensure correct orientation every time, while an O-ring seal and threaded over-screw keep dust and water out. Each cable has four colour-coded co...

SKU: DF-DFR0803

A HiFi digital power amplifier board with Bluetooth 5.0 and AUX input, delivering 50W per channel in a dual-channel configuration. With AM interference suppression and filtering, the board achieves THD as low as 0.1% even at sustained high-power output, producing clear, detailed sound. The board...

SKU: DF-KIT0210 · MPN: KIT0210

This compact outdoor solar power kit is made for off-grid monitoring and IoT installations where mains power is not available. It pairs a 10W monocrystalline solar panel with a solar power controller to charge lithium batteries and provide regulated 12V and 5V outputs for devices such as Raspberr...

SKU: DF-DFR0119

This compact stereo amplifier module from DFRobot is based on the PAM8403 chip, delivering 3W per channel into 4Ω speakers with over 90% efficiency. It's a fully functional two-channel audio amplifier with an integrated sleep mode that can be controlled via a microcontroller. Operating from 3.6–...

SKU: PI-PPMB00130

The Amp:bit is the easiest way to connect a speaker or headphones to your BBC micro:bit. It plugs directly onto the edge connector and provides a 3.5mm headphone jack, solder pads for a speaker, and a volume control wheel — everything you need to add audio to your micro:bit projects. If you have...

SKU: AF-2130

The Adafruit Mono 2.5W Class D Audio Amplifier delivers powerful sound from a tiny package. Based on the PAM8302 chip, it drives 4–8 ohm speakers at up to 2.5 W with over 90% efficiency — making it ideal for portable and battery-powered audio projects. A significant upgrade over basic LM386-based...

SKU: AF-3006

The Adafruit MAX98357A I2S Class D Amplifier Breakout is an all-in-one digital audio solution that decodes I2S audio and amplifies it directly to a speaker — no separate DAC required. Delivering up to 3.2W into a 4Ω speaker, it's a compact and efficient way to add amplified sound to your Raspberr...

SKU: LB-LS6972x2

A compact stereo speaker pair for small audio projects, handheld devices, and embedded builds. Each 45mm driver is rated at 4Ω and 3W, delivering clear, balanced sound in a slim form factor. Pre-wired with a PH2.0 plug for quick connection to common audio amplifier boards. Key Features Stereo ...

SKU: AF-5770

The Adafruit I2S Amplifier BFF is a compact add-on that brings high-quality 3W audio to any QT Py or Xiao development board. Featuring a MAX98357 Class D amplifier, it delivers crisp I2S digital audio using just three GPIO pins (A0, A1, A2) that don't conflict with I2C, UART, or SPI. Designed as...

SKU: DF-DFR0064

The DFRobot 386AMP audio amplifier module is based on the LM386 low-voltage audio power amplifier IC. With a fixed voltage gain of 26 dB (20× amplification) and static power consumption of only 24 mW at 6V, it's well suited for battery-powered applications. Connect a microphone, MP3 module, or o...