All Products

SKU: AF-270 · MPN: 270

A Type-K thermocouple with fiberglass braid insulation, rated to 500°C — far beyond the ~200°C limit of standard vinyl-insulated thermocouples. The bare bead probe design is suited to measuring both air and surface temperatures in high-heat environments such as ovens, kilns, heaters, and industri...

SKU: AF-3895 · MPN: 3895

Thermocouples are best used for measuring temperatures that can go above 100°C. This is a bare-wire bead-probe which can measure air or surface temperatures. Most inexpensive thermocouples have a vinyl covering which can melt at around 200°C, this one uses a fiberglass braid so it can be used ...

SKU: AF-3245 · MPN: 3245

Thermocouples are best used for measuring temperatures that can go above 100°C. This is a bare wires stainless-steel tip probe which can measure air or surface temperatures. Most inexpensive thermocouples have a vinyl covering which can melt at around 200°C, this one uses a fiberglass braid so...

SKU: DF-SEN0139

This is a K type Thermocouple (Temperature sensor) which is very popular for 3D printers such as Ultimaker and Makerbot. You can hardly damage them or mishandle them. You just need an additional IC (Like an AD595) for interpeting the data from this sensor. SPECIFICATIONS Measure...

SKU: DF-SEN0656 · MPN: SEN0656

The CT1780 is a cold-junction compensated amplifier for K-Type thermocouples, designed to make extreme temperature measurement easier to add to microcontroller projects. It digitises the tiny thermocouple signal and provides temperature readings with 0.25℃ resolution over a very wide measurement ...

SKU: AF-4101 · MPN: 4101

The Adafruit MCP9600 I2C Thermocouple Amplifier handles all the analogue complexity of thermocouple measurement for you. Simply connect your thermocouple, wire up I2C, and read accurate temperature data from virtually any thermocouple type — K, J, T, N, S, E, B, and R types are all supported. Th...

SKU: AF-3263 · MPN: 3263

The Adafruit Universal Thermocouple Amplifier MAX31856 Breakout reads temperature from virtually any thermocouple type — K, J, N, R, S, T, E, or B — with 0.0078125°C resolution and a measurement range of -210°C to +1800°C. It handles cold-junction compensation, linearisation, and fault detection ...

SKU: SF-TOL-18340

The digital multimeter (DMM) is an essential tool in every electronic enthusiasts arsenal. This Smart Digital Multimeter, however, is not your average multimeter, it features a continuity sound at less than about 40±5Ω, current/voltage sense, and a Smart Measurement feature. You can use the multi...

SKU: SF-TOL-18341

The Artech A5020 is a 4000-count True RMS digital multimeter with Smart Measurement — it automatically identifies whether you're measuring AC voltage, DC voltage, resistance, or continuity, and auto-ranges to the optimal setting for accuracy. Beyond standard voltage and current readings, the A50...

SKU: SF-TOL-18342

The digital multimeter (DMM) is an essential tool in every electronic enthusiasts arsenal. This Smart Digital Multimeter, however, is not your average multimeter, it features a continuity sound at less than about 40±10Ω, current/voltage sense, and a Smart Measurement feature. You can use the mult...

SKU: SF-PRT-21306 · MPN: PRT-21306

This thermocouple connector is designed to bridge Type-K thermocouples with standard connectors to a printed circuit board.Each connector can be attached to a PCB using the included mounting clip, making it a practical choice for temperature-sensing projects and custom instrumentation builds.Use ...

SKU: AF-5165 · MPN: 5165

The Adafruit MCP9601 (MCP96L01) I2C Thermocouple Amplifier handles all the analogue complexity of thermocouple measurement over a simple I2C interface. Connect your thermocouple, wire up I2C (or use the solderless STEMMA QT connector), and read accurate temperature data from K, J, T, N, S, E, B, ...